Response of Fish and Macroinvertebrate Bioassessment Indices to Water Chemistry in a Mined Appalachian Watershed

Multimetric indices based on fish and benthic macroinvertebrate assemblages are commonly used to assess the biological integrity of aquatic ecosystems. However, their response to specific stressors is rarely known. We quantified the response of a fish-based index (Mid-Atlantic Highlands Index of Biotic Integrity, MAH-IBI) and a benthic invertebrate-based index (West Virginia Stream Condition Index, WV-SCI) to acid mine drainage (AMD)-related stressors in 46 stream sites within the Cheat River watershed, West Virginia. We also identified specific stressor concentrations at which biological impairment was always or never observed. Water chemistry was extremely variable among tributaries of the Cheat River, and the WV-SCI was highly responsive across a range of AMD stressor levels. Furthermore, impairment to macroinvertebrate communities was observed at relatively low stressor concentrations, especially when compared to state water quality standards. In contrast to the WV-SCI, we found that the MAH-IBI was significantly less responsive to local water quality conditions. Low fish diversity was observed in several streams that possessed relatively good water quality. This pattern was especially pronounced in highly degraded subwatersheds, suggesting that regional conditions may have a strong influence on fish assemblages in this system. Our results indicate that biomonitoring programs in mined watersheds should include both benthic invertebrates, which are consistent indicators of local conditions, and fishes, which may be indicators of regional conditions. In addition, remediation programs must address the full suite of chemical constituents in AMD and focus on improving linkages among streams within drainage networks to ensure recovery of invertebrate and fish assemblages. Future research should identify the precise chemical conditions necessary to maintain biological integrity in mined Appalachian watersheds.     

Reconstruction of historical trends of PCDD/Fs and PCBs in the Venice Lagoon, Italy

Historical trends of PCDD/Fs and PCBs from the year 1900 have been reconstructed for the Venice Lagoon area by using a fugacity-based dynamic multimedia model. A novel approach to estimate the inputs to the system was applied. Emissions to the lagoon were estimated by studying dated sediment cores taken from salt marshes located in the lagoon area. These cores have recently proven to be a suitable tool to reconstruct the temporal trends of atmospheric deposition of POPs. According to the model, concentrations of PCBs and PCDD/Fs in air and water reflect the trends of their production and usage, peaking during the 1960s. The peaks in the sediment were delayed by 5-40 years depending on the congener. Predicted concentrations are in good agreement with experimental results. The most important input parameters, identified by a sensitivity analysis, are the degradation constants, K(ow), the Henry's law constant, vapour pressure, active sediment depth, sediment resuspension, and deposition rates, and water residence time in the lagoon.     

Geotechnical and leaching properties of flowable fill incorporating waste foundry sand

Waste foundry sand (WFS) can be converted into flowable fill for geotechnical applications. In this study, WFS samples were obtained from 17 independent metal casting facilities with different casting processes, thus representing a good range of WFS properties. The laboratory studies include physical, geotechnical and leaching properties of flowable fills consisting of WFS, cement, and fly ash mixed to different water contents. The main properties measured include WFS physical properties (density, particle gradation, grain shape, and fine content), WFS flowable fill geotechnical properties (unconfined compressive strength, hydraulic conductivity, setting time, and bleeding), and the fill's leaching properties (heavy metals and organics in the bleed water and the leachate extracted from hardened WFS flowable fills). The test results indicate that in terms of the physical properties, most of the data fall within narrow ranges, although data from the copper/aluminum-based WFS samples might fall beyond the ranges. Geotechnical properties of WFS flowable fills in both fresh and hardened phases were verified conforming to the features of specified flowable fills. Material leaching analyses indicate that the toxicity of WFS flowable fills is below regulated criteria. A mix formulation range originated from this study is proposed for the design of WFS made flowable fill.     

Reinforcement of Yeast Biomass Films with Bacterial Cellulose and Rice Husk Cellulose Nanofibres

Journal of Polymers and the Environment - In the last decades, cellulose nanoparticles have been widely used to reinforce polymeric materials due to their strength and their wide availability in...     

In situ chemical oxidation: Lessons learned at multiple sites

This paper compiles a detailed set of in situ chemical oxidation (ISCO) lessons learned pertaining to design, execution, and safety based on global experiences over the last 20 years. While the benefits of a “correct” application are known (e.g., cost effectiveness, speed, permanence of treatment), history also provides examples of a variety of “incorrect” applications. These provide an opportunity to highlight recurring themes that resulted in failures. ISCO is, and will continue to provide, an important remedial tool for site remediation, particularly as a component of a multifaceted approach for addressing large and complex sites. Future success, however, requires an objective understanding of both the benefits and the limitations of the technology. The ability to learn from the mistakes of the past provides an opportunity to eliminate, or at least minimize, them in the future. Over the last 25 years of ISCO application, process understanding and knowledge have improved and evolved. This paper combines a thorough discussion of lessons learned through decades of ISCO implementation throughout all aspects of ISCO projects with an analysis of changes to the ISCO remediation market. By discussing the interplay of these two themes and providing recommendations from collective lessons learned, we hope to improve the future of safe, cost‐effective, and successful applications of ISCO.     

Comparison of Canadian firefighters and healthy controls based on submaximal fitness testing and strength considering age and gender

Introduction. Few studies have addressed whether firefighters are fitter than the general population and possess sufficient levels of aerobic capacity and muscle strength to perform on-duty tasks in a safe and efficient manner, considering age and gender. We aimed to evaluate the fitness levels of Hamilton firefighters, and to determine the effects of age and gender. Methods. In total, 89 participants were recruited. The modified Canadian aerobic fitness test was used to determine participants’ estimated maximal oxygen consumption (V_O2max) levels. For upper and lower body strength levels, a calibrated J-Tech hand-held dynamometer and a National Institute for Occupational Safety and Health (NIOSH) lifting device was used respectively. Results. Firefighters’ mean (SD) V_O2max level was 40.30?±?6.25?ml·kg^?1·min^?1. Age proved to have a statistically significant impact on V_O2max (p?<?0.001). Gender displayed statistically significant effects on strength levels. Firefighters’ age was the only statistically significant independent variable, and accounted for 61.00% of the variance in firefighters’ aerobic capacity levels. Conclusions. Firefighters possessed somewhat similar aerobic capacities but much higher levels of body strength when compared with the general population. With age, firefighters’ aerobic capacities decreased; however, their upper and lower body strength levels remained the same.     

Mesoscale, finescale and microscale distribution of micro- and nanoplankton in the Irish Sea, with emphasis on ciliates and their prey

We examined the degree of mesoscale (km), finescale (m), and microscale (cm) patchiness of ciliates and their prey in waters of varying hydrographic conditions. Samples were taken throughout the water column, along a transect across the Irish Sea (54°N), at scales ranging from 0.15 to 10⁵ m. We examined physical, chemical, and biological characteristics. The eastern and western Irish Sea were stratified, with a pycnocline at ∼20 to 30 m. The central waters were mixed and had adjacent frontal regions. Euphotic depth was ∼20 to 35 m. Generally, the upper waters were nitrogen-limited, with elevated levels associated with frontal regions and deeper waters. Microphytoplankton exhibited fine-mesoscale patchiness: diatom numbers were low in stratified waters, with higher levels in mixed and frontal regions; dinoflagellates were abundant in subsurface waters near the fronts. Nanoflagellate numbers and biomass decreased with depth below the pycnocline, and exhibited microscale distribution in upper waters; these micropatches may provide increased food levels for ciliates. Microscale distribution of ciliates was rare and only occurred at mixed/frontal sites; finescale ciliate patches were a more prominent feature of the water column. These finescale patches can be composed of a variety of taxa but can also be virtually monospecific. Finescale patches may produce localised regions of high productivity that is available to fishes and copepods, but may also be a sink, as patches can be short-lived and thus unavailable to predators. Received: 28 September 1998 / Accepted: 26 January 1999     

Metal fractionation of cadmium, lead and arsenic of geogenic origin in topsoils from the Marrancos gold mineralisation, northern Portugal

The Marrancos gold mineralisation has a chemical assemblage of Fe–As–Se–Bi–Au–Ag–Te–(Cu–Pb–Zn–Sn–W). The −200 mesh of 144 topsoil samples was analysed by ICP–MS to determine total contents of 53 elements that include potentially harmful elements like Cd, As and Pb. The soil geochemistry shows that some trace elements occur in considerably high concentrations. On the basis of data for total metal concentrations, 10 topsoil samples were selected to carry out a metal fractionation study using a selective extraction method. A set of four leaches of increasing strength was used sequentially in the soil samples. Across the study area, there is some evidence of past mining and exploration activity, indicating that these soils may be locally disturbed. The shallow mineralised quartz veins were exploited for gold by the Romans. Several galleries were constructed during the 2nd World War, probably for the exploration of quartz–cassiterite–wolframite veins. However, the main mineralised body in depth was never explored. The results of metal fractionation show different partitions for the three elements. Total Cd concentrations in these soils are low, with a median value of 0.1 mg/kg. In average, 12% of total Cd is adsorbed by clays and/or co-precipitated with carbonates, and 19% is bounded to Fe–Mn oxyhydroxides. However, the low concentrations indicate that the metal does not represent an immediate risk to human health. For Pb, metal fractionation shows that, on average, 22% of Pb is adsorbed by amorphous Fe and Mn oxides, but the samples from the northern part of the area have the major fractions of Pb in soluble forms. The low probability of exposure in this part of the study area decreases the risk posed by this heavy metal. Total As concentrations in the Marrancos soils are extremely high. A large area has As concentrations above 1,000 mg/kg. For As, metal fractions in the sulphide phase vary between 84 and 98% in the studied samples. But one sample has 20% of total As in easily reducible forms, corresponding to a partial concentration of 1,800 mg/kg that has a high probability of being bioavailable. The most labile As forms occur at the southern part of the area, where the probability of exposure is higher and the risk of human health increases in the same order. From the three studied potentially harmful elements, As is certainly the element of concern.     

Spatial–temporal pattern of bluefin tuna (Thunnus thynnus L. 1758) gonad maturation across the Mediterranean Sea

Atlantic bluefin tuna (BFT; Thunnus thynnus) is a migrating species straddling the North Atlantic Ocean and Mediterranean Sea. It is assumed that this species is divided into a western and an eastern stock, which spawn in the Gulf of Mexico and the Mediterranean Sea, respectively. To learn more about the reproductive behavior of the eastern BFT stock, we tracked gonadal development in adult fish that were sampled between April and July during three consecutive years (2003–2005). Sampling campaigns were carried out using common fishing methods at selected locations within the Mediterranean Sea, namely Levantine Sea, Malta, and Balearic Islands. An additional sampling point, Barbate, was situated northwest of the Straits of Gibraltar along the Atlantic coast. Morphometric parameters such as the total body mass (M _B) and the weights of the gonads (M _G) were recorded, and the respective gonadosomatic index (GSI) values were calculated. The data collected revealed two important trends: (1) GSI values are higher in fish caught in the eastern rather than the western locations across the Mediterranean Sea, and (2) the GSI reaches maximum values between late May and early June in Levantine Sea (eastern Mediterranean Sea), and only 2 and 4 weeks later in the central (Malta) and western (Balearic Islands) locations, respectively. The advanced gonadal development in BFT correlates well with higher sea surface temperatures. Our findings also distinguish the northern Levantine Sea BFT population (mean M _B 78.41 ± 4.13 kg), and the Barbate BFT population with the greatest M _B (all fish sampled > 100 kg). These data reflect a situation in which the eastern Mediterranean basin may function as a habitat for young BFT, until they gain a larger M _B and are able to move to the Atlantic Ocean. However, the existence of genetically discrete BFT populations in the Mediterranean Sea cannot be ruled out.