Evaluation of the geotechnical properties of MSW in two Brazilian landfills

The characteristics of municipal solid waste (MSW) play a key role in many aspects of waste disposal facilities and landfills. Because most of a landfill is made up of MSW, the overall stability of the landfill slopes are governed by the strength parameters and physical properties of the MSW. These parameters are also important in interactions involving the waste body and the landfill structures: cover liner, leachate and gas collection systems. On the other hand, the composition of the waste, which affects the geotechnical behavior of the MSW, is dependent on a variety of factors such as climate, disposal technology, the culture and habits of the local community. It is therefore essential that the design and stability evaluations of landfills in each region be performed based on the local conditions and the geotechnical characteristic of the MSW. The Bandeirantes Landfill, BL, in São Paulo and the Metropolitan Center Landfill, MCL, in Salvador, are among the biggest landfills in Brazil. These two disposal facilities have been used for the development of research involving waste mechanics in recent years. Considerable work has been made in the laboratory and in the field to evaluate parameters such as water and organic contents, composition, permeability, and shear strength. This paper shows and analyzes the results of tests performed on these two landfills. The authors believe that these results could be a good reference for certain aspects and geotechnical properties of MSW materials in countries with similar conditions.     

Composition analysis of dental solid waste in Brazil

When developing proper waste management strategies, it is essential to characterize the volume and composition of solid waste. The aim of this work was to evaluate the composition of dental waste produced by three dental health services in Belo Horizonte, Minas Gerais State, Brazil. Two universities, one public and one private, and one public dental health service were selected. Waste collection took place from March to November 2007. During this period, three samples were collected from each dental health service. The total amount of dental waste produced in one day of dental work was manually separated into three categories: infectious and potentially infectious waste, accounting for 24.3% of the total waste; non-infectious waste, accounting for 48.1%; and domestic-type waste, accounting for 27.6% (percentages are for mean weights of solid waste). Our results showed that most of the waste considered as biomedical may be misclassified, consequently making the infectious waste amount appear much larger. In addition, our results suggest that the best waste minimization method is recycling, and they help to define an appropriate waste management system in all three of the dental health services involved in this study.     

Economies of size and density in municipal solid waste recycling in Portugal

The recycling of municipal solid waste has a remarkable importance in the preservation of the environment and the welfare of the society. However, it is also important that this service can be provided with efficient costs. This paper aims to search for economies of output density and economies of size in the selective collection and recycling activities in Portugal and to identify the size the utilities should have to become more cost efficient. The sample comprises all Portuguese recycling utilities operating in the wholesale segment in the period 2006–2010. The results show that the Portuguese recycling utilities should increase the quantities of municipal solid waste for recycling (especially glass and paper) and also become larger to dimensions corresponding to a supply of 400–550 thousand inhabitants. With the increasing amount of glass collected, utilities are simultaneously struggling to fulfill the targets established by the European legislation and explore the existing economies of output density. The results also show that the management of these services carried out by private companies and the use of incineration (by utilities) seem to reduce the costs of utilities while the regulation of these services and the composting of waste held by utilities tend to increase costs.     

Ashes from fluidized bed combustion of residual forest biomass: recycling to soil as a viable management option

Although bottom ash (BA) [or mixtures of bottom and fly ash (FA)] from clean biomass fuels is currently used as liming agent, additive for compost, and fertilizer on agricultural and forest soils in certain European countries, in several other countries most of the ashes are currently disposed in landfills. This is due to both a lack of a proper classification of the materials and of regulatory barriers.Chemical characterization including analysis of an array of potentially toxic elements (PTEs) proved that over 100,000 tons of BA currently landfilled every year in Portugal actually complied with legal limits for PTEs for soil fertilizers applied in other countries. Pot experiments were conducted, testing three dosages of BA and FA (1, 2.5, and 5%, in weight) in three mining soils with different properties. Additions of ash materials to soils led to an increase in the pore water pH relative to control pots (0% of ash added) and had a clear impact on DOC and on the solubilization of both macro- and micronutrients (notably Cu).The results from the case study using BA and FA from a Portuguese biomass thermal power plant demonstrate that it is imperative to further develop a regulatory framework to alleviate technological and environmental barriers for biomass ash utilization as raw material for fertilizers and/or soil liming agent, in accordance with the goals of the circular economy. A more harmonized view on how to assess the merits and risks of the re-use of these materials is also needed.     

The influence of axle position and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion

Introduction. Wheelchair configuration is an important factor influencing the ergonomics of the user–device interface and, from a biomechanical point of view, small changes in chair setup may have a positive influence on the demand on the upper limbs during manual propulsion. This study aimed to investigate the influence of the position of the rear wheels’ axle and the use of accessories on the activity of upper limb muscles during manual wheelchair propulsion. Methods. Electromyography signals of the biceps, triceps, anterior deltoids and pectoralis major were collected for 11 able-bodied subjects in a wheelchair propulsion protocol with four different wheelchair configurations (differing in axle position and the use of accessories) on a straightforward sprint and a slalom course. Results. With accessories, moving the axle forward led to a decrease in the activity of all muscles in both the straightforward sprint (significant differences in triceps, anterior deltoids and biceps) and the slalom course (significant difference in anterior deltoids and biceps). However, when propelling the chair without accessories, no difference was found related to axle position. Conclusion. Changes in wheelchair configuration can influence the ergonomics of manual wheelchair propulsion. Reducing the biomechanical loads may benefit users’ mobility, independence and social participation.     

Carnauba (Copernicia prunifera) palm tree biomass as adsorbent for Pb(II) and Cd(II) from water medium

Environmental Science and Pollution Research - Plant-based biomass (CFB (carnauba fruit biomass)) obtained from the fruit exocarp of the species Copernicia prunifera (Mill.) H.E. Moore (carnauba)...     

Leaf morphoanatomy of species tolerant to excess iron and evaluation of their phytoextraction potential

Setaria parviflora (Poir.) Kerguélen and Paspalum urvillei Steudel are grasses that grow naturally in a soil with high iron contents. This study aimed to characterize morphoanatomically and histochemically the iron phytotoxicity on leaves and evaluate the phytoextraction potential of these grasses. Saplings were cultivated in hydroponic solution with and without excess Fe-EDTA. Regarding measurements taken on leaves, reduction was observed among treatments of Fe-EDTA on height values of abaxial epidermis and bundle sheath in both species. As for iron histolocalization, stronger reaction was observed in leaves of S. parviflora, in comparison with P. urvillei. Anatomical damage, such as protoplast retraction, irregular xylem, changes in cell volume, and cell collapse, and visual symptoms, like leaf bronzing, chlorosis, and necrosis, were similar in both species when exposed to excess iron; however, P. urvillei showed more severe damage. This species accumulated more iron in shoots than S. parviflora and therefore is more favorable for use in phytoextraction. The root system of both species accumulated higher iron concentrations in relation to shoots.     

Microbial degradation of 17β -estradiol and 17α -ethinylestradiol followed by a validated HPLC-DAD method

This work aimed at studying the biodegradation of two estrogens, 17α -estradiol (E2) and 17β -ethinylestradiol (EE2), and their potential metabolism to estrone (E1) by microbial consortia. The biodegradation studies were followed by High Performance Liquid Chromatography–Diode Array Detector (HPLC–DAD) using a specifically developed and validated method. Biodegradation studies of the estrogens (E2 and EE2) were carried out with activated sludge (consortium A, CA) obtained from a Wastewater Treatment Plant (WWTP) and with a microbial consortium able to degrade recalcitrant compounds, namely fluorobenzene (consortium B, CB). E2 was more extensively degraded than EE2 by CA whereas CB was only able to degrade E2. The addition of acetate as a supplementary carbon source led to a faster biodegradation of E2 and EE2. E1 was detected as a metabolite only during the degradation of E2. The 16S rRNA gene sequence analyses of strains recovered from the degrading cultures revealed the presence of the genera Pseudomonas, Chryseobacterium and Alcaligenes. The genera Pseudomonas and Chryseobacterium were retrieved from cultures supplied with E2 and EE2, while the genus Alcaligenes was found in the presence of E2, suggesting that they might be involved in the degradation of these compounds.     

Use of the genus Artemia in ecotoxicity testing

Information related to varied uses of several species of the genus Artemia (commonly known as brine shrimp), is dispersed among literature from several scientific areas, such as Ecology, Physiology, Ecotoxicology, Aquaculture and Genetics. The present paper reviews information related to Artemia that may be considered relevant for ecotoxicity testing. Integration of different areas of scientific knowledge concerning biology, life cycle and environmental needs of Artemia is of crucial importance when considering the interpretation of results drawn from tests involving this genus. Furthermore, this paper provides suggestions to overcome problems related to toxicity assessment with the use of Artemia as test organism in bioassays, under the scope of estuarine, marine and hypersaline environments. Aspects related to variability in results, adoptable toxicity end-points, culture conditions, characteristics of species and strains, influence of geographical origins over physiological features and responses to exposure to chemical agents are considered.     

The issue of sustainability and disclosure. A case study of selective garbage collection by the Urban Cleaning Service of the city of Rio de Janeiro, Brazil - COMLURB

The Urban Cleaning Company of the City of Rio de Janeiro - COMLURB launched the Recycling Separation Center Project (Projeto Central de Separação de Recicláveis or CSR) in 2003. The objectives of the project were the adequate disposal of solid urban waste as well as the generation of employment and income. The COMLURB Project had economic, environmental and social facets, and the researchers sought to establish whether COMLURB had prepared reports that would enable evaluation of the investment made and the results obtained. In particular, the researchers sought to establish whether COMLURB financial statements set out the results of actions inherent to the CSR. We concluded from our analysis of the Project that the three elements of sustainability (social, environmental and economic), despite being fully present, were not adequately demonstrated. This study therefore proposes a model report with a view to enabling various information users to evaluate the results of the CSR Project.