Trihalomethane formation in ozonated and chlorinated surface water

The relatively recent discovery of disinfection by-products has driven the main regulatory organisms to set maximum contaminant levels for certain substances in drinking water. Trihalomethanes can be deemed as the most important group of by-products in chlorinated surface waters. The present work has focused on trihalomethane formation in a full-scale water treatment plant. We studied the effect of several factors, including ozonation, on trihalomethane levels in chlorinated treated water. The treatment scheme also includes an ozonation step. Electronic Publication     

Spatial and Seasonal Variations of Water Quality in a Mediterranean Catchment: The Llobregat River (NE Spain)

The Llobregat and Ter Rivers, typical Mediterranean catchments in Northeast Spain, supply water to more than 4.5 million inhabitants residing in the metropolitan area of Barcelona. The objective of this work is to study the factors that influence the surface water quality of Llobregat catchment. As such, spatial and temporal variations of more 50 water chemical parameters were monitored in 10 sampling sites for a period that extended from July 1996 to December 2000. The temperature, pH and conductivity were measured at sites, whereas metals were analysed using ICP-OES and ICP-MS instrumental techniques. The head waters of the Llobregat River catchment flow through detrital Mesozoic-Cenozoic sedimentary rocks resulting in calcium bicarbonate-type water with low mineral content. The high water quality of the waterhead is deteriorated in the upper-middle part of the catchment due to: occurrence of evaporite-bearing geological formations, and the mining and industrial activities related to potash exploitation. As a result, an obvious increase in Na, K, Mg, Cl-, Br, Rb, and Sr concentrations is reported leading to a sodium (potassium) chloride water type. This saline hydrochemical fingerprint persists downstream. This important feature renders the low water quality of the Llobregat River to be adequate for drinking supply purposes. In addition, the industrial and residential activities, specially at the lower part of the catchment, increases P, B, Mn, Fe, Pb, Al, Cr, Co, Ni, Cu, Zn, As and Sb water concentrations.     

Soil mineralization of two-phase olive mill wastes: effect of the lignocellulosic composition on soil C dynamics

The low degradation rate of two-phase olive mill wastes (TPOMW) during composting and after soil application is a characteristic feature of these materials. The aim of this work was to evaluate the relationship between the lignocellulosic fraction of TPOMW and the organic matter (OM) degradation rate in three agricultural soils amended with four TPOMW composting mixtures at different degree of stabilisation and prepared with different bulking agents and N sources. The mineralisation kinetics of TPOMW composting mixtures in soil reflected a large amount of slowly mineralisable C even in the starting mixtures (I and T1) where this fraction represented up to 85% of the total potentially mineralisable C pool. The effect of rich lignocellulosic composition was confirmed by the study of the DTS (50% dry TPOMW + 50% sheep manure) mixtures prepared with dry TPOMW, which had undergone partial degradation in a storage pond for one year before composting. These DTS samples showed a more similar kinetic behaviour in soil than the more transformed composting mixtures as reflected in the principal component analysis (PCA) diagram, where they were grouped in the same quadrant dominated by the lignin/holocellulose ratio. Soils amended with mature composts evolved very low amounts of C (between 2 and 6% of the added C) after two months of incubation, which highlights the suitability of these materials as a suitable C source for the soil to promote long term soil C stabilisation.     

Optimizing the APC residue washing process to minimize the release of chloride and heavy metals

An optimization of the air pollution control (APC) residue washing process was carried out to minimize the release of chloride and heavy metals. Taking into account economic parameters such as the consumption of water and reaction time, the best relation found was a S/L ratio of 1/3 during 1 h. At a laboratory scale and according to the values obtained for chloride and heavy metals, the APC residue is classified as non-special according to Catalonian Regulations (Spain). Moreover, the pH of the solution, when MgSO(4) is added during the washing process, may be controlled by the formation of gypsum. In these conditions, the concentration of heavy metals will decrease as a consequence of the formation of their respective insoluble hydroxides. Therefore, the counter-current batch washing process with the addition of small amounts of MgSO(4) is revealed as an economically feasible treatment of the APC residue. This washed residue is ready to be used as secondary material or to be landfilled safely.     

A cost-effective screening method for pesticide residue analysis in fruits, vegetables, and cereal grains

This paper reports the results of studies performed to investigate the potential of applying thin layer chromatography (TLC) detection in combination with selected extraction and cleanup methods, for providing an alternative cost-effective analytical procedure for screening and confirmation of pesticide residues in plant commodities. The extraction was carried out with ethyl acetate and an on-line extraction method applying an acetone-dichloromethane mixture. The extracts were cleaned up with SX-3 gel, an adsorbent mixture of active carbon, magnesia, and diatomaceous earth, and on silica micro cartridges. The Rf values of 118 pesticides were tested in eleven elution systems with UV, and eight biotest methods and chemical detection reagents. Cabbage, green peas, orange, and tomatoes were selected as representative sample matrices for fruits and vegetables, while maize, rice, and wheat represented cereal grains. As an internal quality control measure, marker compounds were applied on each plate to verify the proper elution and detection conditions. The Rf values varied in the different elution systems. The best separation (widest Rf range) was achieved with silica gel (SG)--ethyl acetate (0.05-0.7), SG--benzene, (0.02-0.7) and reverse phase RP-18 F-254S layer with acetone: methanol: water/30:30:30 (v/v) (0.1-0.8). The relative standard deviation of Rf values (CV(Rf)) within laboratory reproducibility was generally less than 20%, except below 0.2 Rf, where the CVRf rapidly increased with decreasing Rf values. The fungi spore inhibition, chloroplast inhibition, and enzyme inhibition were found most suitable for detection of pesticides primarily for confirming their identity or screening for known substances. Their use for determination of pesticide residues in samples of unknown origin is not recommended.     

What can the Allium cepa test say about pesticide safety? A review

Environmental Science and Pollution Research - The increasing use of pesticides has caused global concerns about the toxic effects and adverse consequences of pesticides on humans and the...     

Environmental impact of a coal combustion-desulphurisation plant: abatement capacity of desulphurisation process and environmental characterisation of combustion by-products

The fate of trace elements in a combustion power plant equipped with a wet limestone flue gas desulphurisation (FGD) installation was studied in order to evaluate its emission abatement capacity. With this aim representative samples of feed coal, boiler slag, fly ash, limestone, FGD gypsum and FGD process water and wastewater were analysed for major and trace elements using the following techniques: inductively coupled plasma-mass spectrometry (ICP-MS), inductively coupled plasma-atomic emission spectrometry (ICP-AES), ion chromatography (IC), ion selective electrode (ISE) and atomic absorption spectroscopy (AAS). Mass balances were established allowing to determine the element partitioning behaviour. It was found that, together with S, Hg, Cl, F, Se and As were those elements entering in the FGD plant primarily as gaseous species. The abatement capacity of the FGD plant for such elements offered values ranged from 96% to 100% for As, Cl, F, S and Se, and about 60% for Hg. The environmental characterisation of combustion by-products (boiler slag, fly ash and FGD gypsum) were also established according to the Council Decision 2003/33/EC on waste disposal. To this end, water leaching tests (EN-12457-4) were performed, analysing the elements with environmental concern by means of the aforementioned techniques. According to the leaching behaviour of combustion by-products studied, these could be disposed of in landfills for non-hazardous wastes.     

Maritime ports and beach management as sources of coastal macro-, meso-, and microplastic pollution

Environmental Science and Pollution Research - Plastic pollution is a major environmental issue that affects coasts all around the world. Many studies point out the importance of a better...     

Effect-based assessment of passive air samples from four countries in Eastern Europe

Although passive sampling has been previously used for the monitoring of volatile and semi-volatile contaminants in air, there are limited data on the use of this technique coupled with bioassays based on specific biological responses. Biological responses including those mediated by the aryl hydrocarbon (AhR) receptor as well as (anti-)estrogenicity and (anti-)androgenicity of samples from four Eastern European countries (Lithuania, Slovakia, Romania, and Serbia) were determined. To address the potential differences of specific toxic potencies of pollutant mixtures in ambient air in Eastern Europe, each country was characterized by a single more remote location that served to determine regional background conditions and one location in more urbanized and industrialized locations, which were defined as “impacted” areas. Besides samples from Lithuania, a significant gradient in concentrations of AhR-mediated potency from background and impacted localities was observed. Greatest potencies were measured in samples from impacted locations in Romania and Slovakia. Concentrations of polycyclic aromatic hydrocarbons (PAHs) that were quantified accounted for 3–33 % of the 2,3,7,8-tetrachlorodibenzo-p-dioxin equivalents determined by use of the bioassay. No significant estrogenic potency was detected but anti-estrogenic effects were produced by air from two background locations (Lithuania, Slovakia) and three impacted locations (Lithuania, Romania, and Serbia). Anti-androgenic potency was observed in all samples. The greatest anti-estrogenic potency was observed at the background location in Slovakia. Anti-estrogenic and anti-androgenic potencies of studied air samples were probably associated with compounds that are not routinely monitored. The study documents suitability of passive air sampling for the assessment of specific toxic potencies of ambient air pollutants.