Microscale investigations of the fate of heavy metals associated to iron-bearing particles in a highly polluted stream

As it flows through a dense steelmaking area, the Fensch River does transport iron-rich particles and colloids, displaying high contents in metallic contaminants (Zn, Cr, Pb, Cu, Ni, and As). Chemical analysis using inductively coupled plasma mass spectrometry (ICP-MS) was carried out on three compartments—waters, suspended materials, and sediments—along the river linear. The variations of metallic trace element concentrations along the river were shown to be partially related to external inputs (industrial and domestic wastewaters and urban surfaces leaching). However, some discrepancies of element partitioning were evidenced. Pb, Cu, and Mn tend to concentrate in suspended particulate and in dissolved fraction, while Cr and As follow the trend of Fe and concentrate within sediments of the most downstream station, just before the junction with Moselle waters. Zn appears strongly associated to iron-rich particles, resulting in a decrease of its concentration in waters for the last station. Along the Fensch linear, the variation of metal partitioning between water and particulate phases is accompanied with strong modifications of the nature and mineralogy of iron-rich particles, as evidenced by microanalyses using electron and X-ray beams. The combination of bulk analyses using ICP-MS and microanalyses applied to the three compartments allowed us to propose a three-step process “settling–weathering–resuspension” to explain Zn partitioning.     

Trends and problems of solid waste management in developing countries: a case study in seven Palestinian districts

There is a great interest in solving problems related to municipal solid waste (MSW) management in the Palestinian territory. However, few studies have been done to assess the extent of these problems and suggest the best alternative solutions. This study aims at assessing MSW conditions in the seven major districts in northern West Bank, Palestinian territory. The study focuses on comparing several MSW management elements (such as collection, budget, and disposal) in municipalities, village councils, and refugee camps in the studied districts and the problems faced by these institutions in handling the waste. It also provides information on MSW collection service availability and waste disposal practices in the districts studied. It was found that, although MSW collection service was available for 98% of the residents in the areas surveyed, no proper treatment or landfill procedure was followed for the collected waste in most of these areas. Instead, waste burning in open dumpsites was the most common practice. Moreover, due to inefficient collection of waste disposal fees from the residents, municipalities were forced to sometimes cut the collection service and reduce its labor force, especially in villages. The budget for MSW management was between 2% and 8% of the total budget of the municipalities studied, indicating a low priority for this issue.     

Metal binding in soil cores and sediments in the vicinity of a dammed agricultural and industrial watershed

The environment is witnessing a downgrade caused by the amelioration of the industrial and agricultural sectors, namely, soil and sediment compartments. For those reasons, a comparative study was done between soil cores and sediments taken from two locations in the Qaraaoun reservoir, Lebanon. The soil cores were partitioned into several layers. Each layer was analyzed for several physicochemical parameters, such as functional groups, particle size distribution, ζ-potential, texture, pH, electric conductivity, total dissolved solids, organic matter, cation exchange capacity, active and total calcareous, available sodium and potassium, and metal content (cadmium, copper, and lead). The metal content of each site was linked to soil composition and characteristics. The two sites showed distinguishable characteristics for features such as organic matter, pH, mineral fraction, calcareous, and metal content. The samples taken toward the south site (Q1), though contain lower organic matter than the other but are more calcareous, showed higher metal content in comparison to the other site (Q2) (average metal content of Q1 > Q2; for Cd 3.8?>?1.8 mg/kg, Cu 28.6?>?21.9 mg/kg, Pb 26.7?>?19 mg/kg). However, the metal content in this study did not correlate as much to the organic matter; rather, it was influenced by the location of the samples with respect to the dam, the reservoir’s hydrodynamics, the calcareous nature of the soil, and the variation of the industrial and agricultural influence on each site.     

Calibration Catchment Selection for Flood Regionalization Modeling1

Wan Jaafar, Wan Zurina, and Dawei Han, 2012. Calibration Catchment Selection for Flood Regionalization Modeling. Journal of the American Water Resources Association (JAWRA) 48(4): 698‐706. DOI: 10.1111/j.1752‐1688.2012.00648.x Abstract: There are two unsolved problems in flood regionalization model development related to the quantity and quality of calibration catchments: (1) how many calibration catchments should be used? and (2) how to select the calibration catchments? This study explores these two questions through a case study on the median annual maximum flood (QMED) model in the United Kingdom. It has been found that the chance of developing a good QMED model decreases significantly when the number of calibration catchments drops below a critical number (e.g., 60 in the case study). However, no significant improvement is achieved if the number of calibration catchments is above it. This number could be used as a benchmark for choosing randomly selected calibration catchments. Across a broad range of calibration catchment numbers, there are good and poor calibrated models regardless of calibration catchment numbers. High quality models could be developed from a small number of calibration catchments and also poor models from a large number of calibration catchments. This indicates that the number of calibration catchments may not be the dominating factor for developing a high quality regionalization model. Instead, the information content could be more important. The study has demonstrated that the standard deviation values between the best and poorest groups are distinctive and could be used in choosing appropriate calibration catchments.     

Hydrous ferric oxide nanoparticles hosted porous polyethersulfone adsorptive membrane: chromium (VI) adsorptive studies and its applicability for water/wastewater treatment

In this present study, adsorptive membranes for Cr(VI) ion removal were prepared by blending polyethersulfone (PES) with hydrous ferric oxide (HFO) nanoparticles (NPs). The effects of HFO NPs to PES weight ratio (0–1.5) on the physicochemical properties of the resultant HFO/PES adsorptive membranes were investigated with respect to the surface chemistry and roughness as well as structural morphologies using different analytical instruments. The adsorptive performance of the HFO NPs/PES membranes was studied via batch adsorption experiments under various conditions by varying solution pH, initial concentration of Cr(VI), and contact time. The results showed that the membrane made of HFO/PES at a weight ratio of 1.0 exhibited the highest adsorption capacity which is 13.5 mg/g. Isotherm and kinetic studies revealed that the mechanism is best fitted to the Langmuir model and pseudo-second-order model. For filtration of Cr(VI), the best promising membranes showed improved water flux (629.3 L/m² h) with Cr(VI) ion removal of 75%. More importantly, the newly developed membrane maintained the Cr(VI) concentration below the maximum contamination level (MCL) for up to 9 h.

     

Selective metal leaching from technosols based on synthetic root exudate composition

This study focused on metal release from technosols induced by synthetic root exudate (SRE). The effect of SRE composition on metal release was studied using six technosols. This was done by treating the technosols with SRE solutions having varying concentrations of low molecular weight organic acids (LMWOAs), namely oxalic, citric, and malic acids. Consequently, the physico-chemical parameters (pH and electric conductivity), Ca, Mg, Fe, Zn, and Cu release (by atomic absorption spectroscopy, AAS), chemical changes (by Fourier transform infrared, FT-IR), and organic parameters (by fluorescence) were investigated. Metal release showed to be dependent on the SRE composition and technosol characteristics. Citric acid selectively released Ca, Mg, Zn, and Cu from technosols in a concentration-dependent manner; oxalic acid showed a significant role in the release of Mg and Fe. Under relatively high LMWOA concentrations, particulate organo-mineral complexes precipitated. Additionally, technosol weathering was seen by the dissolution of humic substances and ferriallophanes, which in turn caused metal release. However, re-precipitation of these phases showed to re-sorb metals, thus underestimating the role of LMWOAs in metal release. Therefore, the selective metal leaching was highly dependent on the SRE composition and LMWOA concentrations on one hand, and on the mineral, organic, and organo-mineral components of the technosols on the other. The understanding of such processes is crucial for proposing and implementing environmental management strategies to reduce metal leaching or for the beneficial re-usage of metals (e.g., for agromining) from technosols.     

A comparative study of tea waste derived humic-like substances with lignite-derived humic substances on chemical composition,spectroscopic properties and biological activity

Environmental Science and Pollution Research - Emerging demand for humic substances escalated the short supply of coal-related resources from which humic substances are extracted in large...