Life Cycle Assessment of landfill biogas management: Sensitivity to diffuse and combustion air emissions

Goal and scopeThe life cycle inventory of landfill emissions is a key point in Life Cycle Assessment (LCA) of waste management options and is highly subject to discussion. Result sensitivity to data inventory is accounted for through the implementation of scenarios that help examine how waste landfilling should be modeled in LCA.MethodFour landfill biogas management options are environmentally evaluated in a Life Cycle Assessment perspective: (1) no biogas management (open dump), conventional landfill with (2) flaring, (3) combined heat and power (CHP) production in an internal combustion engine and (4) biogas upgrading for use as a fuel in buses. Average, maximum and minimum literature values are considered both for combustion emission factors in flares and engines and for trace pollutant concentrations in biogas.ResultsBiogas upgrading for use as a fuel in buses appears as the most relevant option with respect to most non-toxic impact categories and ecotoxicity, when considering average values for trace gas concentrations and combustion emission factors. Biogas combustion in an engine for CHP production shows the best performances in terms of climate change, but generates significantly higher photochemical oxidant formation and marine eutrophication impact potentials than flaring or biogas upgrading for use as a fuel in buses.Interpretation and discussionHowever the calculated environmental impact potentials of landfill biogas management options depend largely on the trace gas concentrations implemented in the model. The use of average or extreme values reported in the literature significantly modifies the impact potential of a given scenario (up to two orders of magnitude for open dumps with respect to human toxicity). This should be taken into account when comparing landfilling with other waste management options. Also, the actual performances of a landfill top cover (in terms of oxidation rates) and combustion technology (in terms of emission factors) appear as key parameters affecting the ranking of biogas management options.     

Mild hydrolysis of 2-trifluoromethylphenol: kinetics, mechanism and environmental relevance

2-Trifluoromethylphenol was hydrolysed in a phosphate buffer at neutral pH. At mild temperatures ranging from 34 degrees C to 69 degrees C this compound liberates consecutively fluorine anions to form salicylic acid. This process is energetically driven by the hydration of the fluorine anions. No intermediates have been detected by HPLC and (19)F-NMR and this was confirmed by computer calculations which favor the first step in the whole reaction sequence being rate-limiting. Accordingly, the reaction energy of the first dehalogenation of the trifluoromethyl anion is 28.4 kcal mol(-1) higher than for the second dehalogenation. The pseudo-first-order kinetic was determined and from an Arrhenius diagram an activation energy of E(a)=25.1 kcal mol(-1) has been estimated. At 37 degrees C and a pH of 7.4 the half-life was 6.9 h. The rate of hydrolysis was favored at higher pH and it was not influenced by oxygen, sunlight or trace elements found in natural water. The latter was shown by incubations with lake water instead of distilled water.     

Biodegradation of polyethylene films with prooxidant additives

Prooxidant additives represent a promising solution to the problem of the environment contamination with polyethylene film litter. Prooxidants accelerate photo- and thermo-oxidation and consequent polymer chain cleavage rendering the product apparently more susceptible to biodegradation. The question not fully resolved remains the biodegradation itself, its mechanism and especially the factors influencing the time-frame in which it can occur. The presented review is aimed to provide comprehensible information for both microbiologists and polymer scientists, who need participate in the research leading to an understanding of the microorganism action on the oxidized polyethylene and to design of new materials.     

Biosorption of Cu(II) and Zn(II) onto a lignocellulosic substrate extracted from wheat bran

We studied the removal of copper and zinc ions from aqueous solutions using a lignocellulosic substrate obtained by an acido-basic treatment of wheat bran. The sorption capacity of this material was investigated through batch and column experiments. Batch experimental results showed that the retention capacity of the lignocellulosic substrate was 0.20×10^–3 mol g^–1 at pH 4.5 for copper(II) and 0.24×10^–3 mol g^–1 at pH 6.5 for zinc(II). Column experiments showed a reduced sorption capacity for both ions compared to batch experiments. Batch and column data were analysed using the Langmuir equation in order to determine the affinity constant and the binding capacity of the sorbent and to compare both retention processes.     

The use of magnetic resonance imaging in the prediction of birthweight

Extremes of fetal growth can increase adverse pregnancy outcomes, and this is equally applicable to single and multiple gestations. Traditionally, these cases have been identified using simple two-dimensional ultrasound which is quite limited by its low precision. Magnetic resonance imaging (MRI) has now been used for many years in obstetrics, mainly as an adjunct to ultrasound for congenital abnormalities and increasingly as part of the post-mortem examination. However, MRI can also be used to accurately assess fetal weight as first demonstrated by Baker et al in 1994, using body volumes rather than standard biometric measurements. This publication was followed by several others, all of which confirmed the superiority of MRI; however, despite this initial promise, the technique has never been successfully integrated into clinical practice. In this review, we provide an overview of the literature, detail the various techniques and formulas currently available, discuss the applicability to specific high-risk groups and present our vision for the future of MRI within clinical obstetrics.     

EFFECTS OF THE TOPOGRAPHIC INDEX DISTRIBUTION ON PREDICTED RUNOFF USING GRASS1

ABSTRACT: The effects of digital elevation model resolutions and contour lengths on the distribution of the topographic index, a fundamental parameter for the hydrologic model, TOPMODEL, and their influence on the predicted peak flows are investigated in this paper. A small agricultural catchment (3.38 km²) is used to determine the catchment response modeled by TOPMODEL for three rainfall events.     

Herbaceous Covers to Control Tree Invasion in Rights-of-Way: Ecological Concepts and Applications

In northeastern America, thousands of kilometers of utility rights-of-way (ROWs) have to be managed to prevent the establishment of a tall vegetation cover that does not comply with safety and maintenance regulations. Recent decades have seen the emergence of ecologically based vegetation control strategies to reduce environmental impacts as well as maintenance costs. One such strategy is to take advantage of competitive herbaceous covers to limit tree invasion. This approach, however, as well as its fundamental underlying principles, has been little scrutinized. In this article, (1) we present the main ecological concepts supporting the use of a herbaceous cover to limit tree invasion, emphasizing naturally forested ecosystems of northeastern America. They include reported evidence of stable plant communities and an overview of potential underlying mechanisms of inhibition. (2) We then review field applications, specifically testing the ability of seeded herbaceous covers to control tree invasion in ROWs. (3) We discuss unresolved issues relevant to management and research. The available evidence suggests that seeding herbaceous covers in ROWs can help control tree invasion, but many issues still limit broad-scale applications. The various interactions that govern plant community dynamics are far from being fully understood, so selecting species still largely depends on an empirical approach. Patterns of resistance to tree invasion must be investigated over a wide range of spatial, historical, and environmental contexts to determine effective management and seeding practices that will lead to broad-scale applications. We suggest establishing communities rather than single dominant species and using as much as possible native species to limit risks of invasion.Published online