The toxicity of the dispersant Corexit 9527 and oil-dispersant mixtures to ciliate protozoa

The toxicity of Corexit 9527 to ciliate protozoa was determined on the basis of growth rate. Chemically dispersed oil was more toxic than either the dispersant or crude oil alone.     

Quantitative determination of hexamethylene diisocyanate (HDI), 2,4-toluene diisocyanate (2,4-TDI) and 2,6-toluene diisocyanate (2,6-TDI) monomers at ppt levels in air by alkaline adduct coordination ionspray tandem mass spectrometry

Occupational exposures to isocyanates can lead to occupational asthma. Once sensitized, some workers could react to isocyanate monomers at concentrations below 1% of the Permissible Exposure Limit of 5 ppb in air. Currently available methods are not sufficiently sensitive to adequately evaluate isocyanates present at these levels in workplace air. This article describes a novel method for isocyanate determination allowing the ultratrace quantification in workplace air of hexamethylene diisocyanate, 2,4-toluene diisocyanate and 2,6-toluene diisocyanate monomers. Sampling is performed during a complete workshift at a flow rate of 1 L min(-1) with a cassette containing a 1-(2-methoxyphenyl)piperazine-impregnated 25 mm filter. Analysis is performed using liquid chromatography hyphenated with coordination ionspray tandem mass spectrometry. The analytical method's linearity was measured for a concentration range varying from the limit of detection of 0.04-0.13 ng mL(-1), depending on the monomer, up to approximately 32 ng mL(-1) for every isocyanate monomer, all with correlation coefficients (R(2)) greater than 0.999. The analytical method's lower limit of quantification combined with an adapted sampling strategy allow the quantification of isocyanate monomers down to 0.04 ppt for an 8 h work shift when a lithium adduct is used, which is more than 300 times lower than the most sensitive method currently available. This novel method can be used to confirm the very low level of isocyanate monomers for the safe reassignment of sensitized workers and it is also useful for charting the isocyanate dispersion tail in workplace environments.     

The use of sensor arrays for environmental monitoring: interests and limitations

Continuous, in situ monitoring of air, water and land quality is fundamental to most environmental applications. Low cost and non-invasive chemical sensor arrays provide a suitable technique for in situ monitoring. Their ability and performance under realistic conditions is discussed in this paper. Published studies report promising results despite a number of limitations that are associated with both the technology itself and its application in ever changing ambient conditions. Early investigations include the analysis of single substances as well as odour and wastewater organic load monitoring. Reported applications typically highlight the sensitivity of the currently available sensors to changes in temperature, humidity and flow rate. Two types of approaches are recommended to deal with these effects: either working under fixed experimental conditions or measuring the external parameters to numerically compensate for their change. The main challenge associated with the use of non-specific sensor arrays lies in establishing a relationship between the measured multivariate signals and the standards metrics that are traditionally used for quality assessment of gas mixtures. For instance, odour monitoring requires calibration against olfactometric measurements while investigations of wastewater samples still need to be correlated with organic pollution parameters such as BOD, COD or TOC. On the other hand, results obtained in the field have demonstrated how sensor arrays can be readily used as simple alarm devices or as early warning systems based on a general air/water quality index.     

Modified Edman degradation applied to hemoglobin for monitoring occupational exposure to alkylating agents

A method that can be used for the monitoring of exposure to alkylating agents in the environment is presented. It is based on the quantification of alkylated N‐terminal valines in hemoglobin, using a modified Edman degradation procedure. The detection limit (GC/electron capture detector or GC/MS) is increased by two magnitudes of ten when using pentafluorophenyl isothiocyanate instead of phenyl isothiocyanate in the derivatization step. As little as one nmole N‐(—2 hydroxyethyl)valine per gram hemoglobin can be detected under practical conditions.     

Response of tree growth to a changing climate in boreal central Canada: A comparison of empirical,process-based,and hybrid modelling approaches

The impact of 2 × CO₂ driven climate change on radial growth of boreal tree species Pinus banksiana Lamb., Populus tremuloides Michx. and Picea mariana (Mill.) BSP growing in the Duck Mountain Provincial Forest of Manitoba (DMPF), Canada, is simulated using empirical and process-based model approaches. First, empirical relationships between growth and climate are developed. Stepwise multiple-regression models are conducted between tree-ring growth increments (TRGI) and monthly drought, precipitation and temperature series. Predictive skills are tested using a calibration–verification scheme. The established relationships are then transferred to climates driven by 1× and 2 × CO₂ scenarios using outputs from the Canadian second-generation coupled global climate model. Second, empirical results are contrasted with process-based projections of net primary productivity allocated to stem development (NPP_s). At the finest scale, a leaf-level model of photosynthesis is used to simulate canopy properties per species and their interaction with the variability in radiation, temperature and vapour pressure deficit. Then, a top-down plot-level model of forest productivity is used to simulate landscape-level productivity by capturing the between-stand variability in forest cover. Results show that the predicted TRGI from the empirical models account for up to 56.3% of the variance in the observed TRGI over the period 1912–1999. Under a 2 × CO₂ scenario, the predicted impact of climate change is a radial growth decline for all three species under study. However, projections obtained from the process-based model suggest that an increasing growing season length in a changing climate could counteract and potentially overwhelm the negative influence of increased drought stress. The divergence between TRGI and NPP_s simulations likely resulted, among others, from assumptions about soil water holding capacity and from calibration of variables affecting gross primary productivity. An attempt was therefore made to bridge the gap between the two modelling approaches by using physiological variables as TRGI predictors. Results obtained in this manner are similar to those obtained using climate variables, and suggest that the positive effect of increasing growing season length would be counteracted by increasing summer temperatures. Notwithstanding uncertainties in these simulations (CO₂ fertilization effect, feedback from disturbance regimes, phenology of species, and uncertainties in future CO₂ emissions), a decrease in forest productivity with climate change should be considered as a plausible scenario in sustainable forest management planning of the DMPF.     

Intra-storm study of solute chemical composition of overland flow water in two agricultural fields

Few studies have assessed the transport of dissolved nutrients at the field scale under natural rainfall conditions. Hysteresis between dissolved nutrients and discharge behavior can complicate such assessments and this effect has only been examined qualitatively. In this study, we investigated factors contributing to short-term variations of dissolved cation (Ca, Mg, Na, and K) and anion (soluble reactive phosphorus [SRP], NO3, and SO4) concentrations in runoff water and developed a quantitative method to study their hysteretic behavior. Within-storm variations of dissolved nutrient concentrations were determined in two agricultural fields during four natural rainfall events along with discharge, sediment, antecedent soil water conditions, and nutrient contents. For each event, nutrient loads were plotted against discharge during the rising and falling limb of the runoff hydrograph. The resulting hysteresis curves were characterized by an index H, which is the ratio between the integrated areas under the rising and falling curves of the hydrograph. Results showed that nutrient concentrations increased with time during each event. Counterclockwise (H < 1) hysteresis, occurring when the falling limb had larger loads, was found when soils were initially dry whereas clockwise hysteresis (H > 1) was associated with prior wet soil conditions. Two hypotheses are suggested to explain these variations. First, suspended sediments could have acted as a sink for dissolved nutrients and the sensitivity of nutrients to hydrological conditions was determined by their preferential sorption on these sediments. Second, movement of nutrients into runoff occurred more readily as soils became wetter during an event.