Beach topography mapping—a comparsion of techniques

A comparison of current techniques for measuring elevations in the beach and near-shore zones is presented. Techniques considered include traditional methods such as ground survey along transects and airborne stereophotogrammetry, and also newer methods based on remote sensing such as airborne scanning laser altimetry (LiDAR). The approach taken was to identify a representative group of users of beach elevation data, elicit their requirements regarding these data, then assess how well the different methods met these requirements on both technical and financial grounds. Potential users of beach height measurements include those concerned with coastal defence, coastal environmental management economic exploitation of the intertidal zone, and coastal flood forecasting. Three test areas in the UK were identified covering a range of such users and also different beach types. A total of 17 basic user requirements were elicited. For each requirement each method was scored according to the degree to which it could meet the requirement. Total scores were calculated and each method ranked. This was undertaken for all the requirements together, for a subset relating to survey of narrow beaches, and for a subset relating to survey of wide beaches. Approximate costs were also established for the top six methods. Airborne stereophotogrammetry proved to be the best method technically, but was also the most expensive. Ground survey provides very good technical performance on narrower beaches at moderate cost. Airborne LiDAR can achieve good technical performance on both narrow and wide beaches at lower cost than ground survey. The satellite-based waterline method was also inexpensive and gave good results on wide beaches. An overall conclusion is that, while the traditional methods of ground survey and airborne stereophotogrammetry remain the best for engineering-related surveys requiring high levels of accuracy, airborne LiDAR in particular looks set to have a significant impact on beach survey for applications for which a vertical accuracy of 20 cm is acceptable, provided that its technology evolves satisfactorily.     

Perceived intra-organizational mobility: Reliable versus exceptional performance as means to getting ahead

‘Work hard and get ahead’ is a fundamental tenet of modern organizations, but employees have different interpretations of what it means to ‘work hard’ and perceive that there are multiple channels to ‘get ahead’. The current research explores employees' perceptions of the factors affecting their intra-organizational upward mobility. Results using a survey instrument in a large American medical college show that employees can distinguish among intra-organizational mobility channels based on reliable role performance, on exceptional role performance, and on non-performance factors such as personal characteristics (e.g. race and gender), or luck and favoritism. Perceptions of mobility channels are related to such organizationally relevant outcomes as employee satisfaction and turnover intentions. Occupational sub-groups, however, perceive different structures for upward mobility.     

Demography and phenology of the intertidal green algaCodium setchellii: The enigma of local scarcity on sand-influenced rocky shores

Demographic and phenological attributes that characterize rare and scarce species have not been extensively investigated for marine benthic organisms. From 1984 to 1987, 1 investigated the population ecology of the low intertidal, psammophytic green algaCodium setchellii Gardner that forms low-density populations on sand-influenced rocky benches on N.E. Pacific shores. To address why the alga is not more common in the habitat in which it is most abundant, I quantified sand fluctuations and population dynamics ofC. setchellii at several sites along the central coast of Oregon, USA. Sand movement was highly unpredictable both spatially and temporally on a local scale. AlthoughC. setchellii became fertile in late autumn to winter, the alga and rocky surfaces were often deeply buried by sand in these seasons. Algal recruitment was also spatially and temporally variable, and mortality of small thalli was high. Thallus growth was generally slow, and the alga had the capacity to persist at a given size for long periods. On sand-influenced rocky shores, mortality of largethalli was low, with some thalli persisting for several years. In laboratory experiments,C. setchellii lost substantial biomass during 4 to 5 wk sand burials, whereas two sympatric species of psammophytic algae lost little to no biomass. The within-site scarcity ofC. setchellii may be a consequence of (1) largely unpredictable environmental conditions that reduce algal recruitment and survival, and (2) apparent lack of specialized anatomical or reproductive adaptations to persist on sand-scoured rocky shores. The alga's persistence may be due to its slow growth and long lifespan.     

Soil contamination of heavy metals in the Katedan Industrial Development Area, Hyderabad, India

Studies on quantitative soil contamination due to heavy metals were carried out in Katedan Industrial Development Area (KIDA), south of Hyderabad, Andhra Pradesh, India under the Indo-Norwegian Institutional Cooperation Programme. The study area falls under a semi-arid type of climate and consists of granites and pegmatite of igneous origin belonging to the Archaean age. There are about 300 industries dealing with dyeing, edible oil production, battery manufacturing, metal plating, chemicals, etc. Most of the industries discharge their untreated effluents either on open land or into ditches. Solid waste from industries is randomly dumped along roads and open grounds. Soil samples were collected throughout the industrial area and from downstream residential areas and were analysed by X-ray Fluorescence Spectrometer for fourteen trace metals and ten major oxides. The analytical data shows very high concentrations of lead, chromium, nickel, zinc, arsenic and cadmium through out the industrial area. The random dumping of hazardous waste in the industrial area could be the main cause of the soil contamination spreading by rainwater and wind. In the residential areas the local dumping is expected to be the main source as it is difficult to foresee that rain and wind can transport the contaminants from the industrial area. If emission to air by the smokestacks is significant, this may contribute to considerable spreading of contaminants like As, Cd and Pb throughout the area. A comparison of the results with the Canadian Soil Quality Guidelines (SQGL) show that most of the industrial area is heavily contaminated by As, Pb and Zn and local areas by Cr, Cu and Ni. The residential area is also contaminated by As and some small areas by Cr, Cu, Pb and Zn. The Cd contamination is detected over large area but it is not exceeding the SQGL value. Natural background values of As and Cr exceed the SQGL values and contribute significantly to the contamination in the residential area. However, the availability is considerably less than anthropogenic contaminants and must therefore be assessed differently. The pre- and post-monsoon sampling over two hydrological cycles in 2002 and 2003 indicate that the As, Cd and Pb contaminants are more mobile and may expect to reach the groundwater. The other contaminants seem to be much more stable. The contamination is especially serious in the industrial area as it is housing a large permanent residing population. The study not only aims at determining the natural background levels of trace elements as a guide for future pollution monitoring but also focuses on the pollution vulnerability of the watershed. A plan of action for remediation is recommended.     

PRODUCTION PROCESSES UNDER THE ICE IN LAKE ST. CLAIR: 1. IRRADIATION AND TEMPERATURE1

ABSTRACT: Data from three ice-covered stations in Lake St. Clair were collected to evaluate the effect of ice and related variables on phytoplankton production. Primary production, phytoplankton standing crop, irradiation and temperature were measured from January to April, 1973. Mean production values ranged from 0.74 mgC/m³/h at station 1 near Mitchell Bay to 3.4 mgC/m³/h in waters at stations 2 and 3 below the Thames River mouth. A similar pattern was observed in chlorophyll a concentration, the mean values ranged from 0.63 μg/1 at station 1 to 2.1 and 1.3 μg/1 at stations 2 and 3. Temperature stratification occurred at the three stations. However, the temperatures at station 1 were consistently more than a degree warmer than at the other two stations. Irradiation was low, having a mean value at the sampling depth of .075 ly/min. The data is interpreted to indicate that the ice-bound phytoplankton were adapted to the low irradiation. It is suggested that the variation observed between stations is related to the formation of a plume by the Thames River and differences in nutrient loads carried by the St. Clair and Thames Rivers.     

Estimation of microplastics in sediments at the southernmost coast of India (Kanyakumari)

Environmental Science and Pollution Research - Increasing urbanization and anthropogenic activities of the last couple of decades have left significant amounts of plastic debris in both coastal and...     

Behaviour and biodegradation of sulfonamides (p-TSA, o-TSA, BSA) during drinking water treatment

Three sulfonamides -para-toluenesulfonamide (p-TSA), ortho-toluenesulfonamide (o-TSA) and benzenesulfonamide (BSA) - have recently been detected in groundwater within a catchment area of one drinking water treatment plant (DWTP), which is located downstream of a former sewage farm. The degradation pathways of p-TSA, o-TSA and BSA were investigated during drinking water treatment with incubation experiments and an experimental filter. Incubation experiments showed that p-TSA is removed during the treatment by microbiological processes. Removal of p-TSA is performed by adapted microorganisms only present in polluted groundwater. The elimination in an experimental filter of 1.6m length applying filtration velocities from 2 to 6 m h(-1) was approximately 93% of p-TSA. The microbial degradation rates in the incubation experiment were approximately 0.029 microg l(-1) h(-1) (zero order reaction). In the experimental filter, the reaction rate constants were around 0.0063 s(-1) for all filtration velocities (1st order reaction). Drinking water treatment does not reduce the concentration of o-TSA and BSA under conditions encountered in Berlin. p-TSA, o-TSA and BSA were only measured in the low microg l(-1) concentrations range in the purified water.     

Spatial variability of infaunal nematode and polychaete assemblages in two muddy subtidal habitats

Spatial variation of populations and their assemblages is an important component of many aspects of ecology, including the maintenance of species diversity. In nature, organisms are generally aggregated in patches or form gradients or other spatially related patterns. This investigation quantified the degree of spatial structure in benthic invertebrate assemblages. It examined the distribution of infaunal assemblages of different size, mobility and contrasting life-history strategies (i.e. meiofaunal nematodes and macrofaunal polychaetes) in two offshore muddy habitats in the Celtic Deep and the NW Irish Sea off the west coast of the United Kingdom. The more heterogeneous habitat in the NW Irish Sea was characterised by higher tidal stress and bottom temperature while greater water depth, mean particle diameter and organic carbon content was typical for the comparatively homogeneous environment in the Celtic Deep. In both habitats, the environmental conditions became increasingly dissimilar with separation. A total of 125 nematode and 88 polychaete species were recorded with 69% of the nematode and 49% of polychaete species present at both study sites. Occurrence frequency of species, species diversity and average similarity of assemblage composition was higher in the Celtic Deep than in the NW Irish Sea. Results from correlation analyses revealed statistically robust relationships of community similarity and sample distance. Given their small size and low mobility, nematodes were more susceptible to within-habitat physical variability than larger-sized, more mobile polychaetes. This, coupled with limits to long-distance dispersal and likely restrictions in gene flow, resulted in a significant decrease in community similarity with distance at the spatial scales sampled (i.e. within 0.1–23 km). Polychaetes, in contrast, combined a higher dispersal potential (>23 km) with a relatively high tolerance to within-habitat environmental variability and these were the most likely causes for non-significant relationships between the similarity of their assemblages and sample distance. The potential mechanisms causing the observed variation and implications of results for environmental management strategies are discussed. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

某危险废物填埋场地下水污染预测及控制模拟

以某危险废物填埋场为研究对象,在收集其水文地质资料基础上,运用Visual Modflow建立填埋场地下水水流和溶质运移耦合模型,对填埋场防渗层发生渗漏后,渗滤液中Cr6+在地下水中的运移过程以及地面硬化、防渗墙和排水沟3种污染控制措施对污染羽阻隔效果进行模拟预测.结果表明,Cr6+随地下水流方向运移形成污染羽,10 a后污染羽到达水塘边界,运移距离约为1 450 m,但随后10～20 a之间污染羽扩散范围没有明显扩大;地表硬化后,20 a内污染羽未扩散至水塘边界;防渗墙设置到上层含水层底部时,监测井Cr6+浓度高于未设置防渗墙时浓度,设置到下层含水层底部时,Cr6+浓度与设置于上层含水层时监测结果相反;排水沟日排水量达到2 642 m3时能有效控制污染羽扩散,20 a后污染羽尚未污染监测井;地表硬化与排水沟组合控制污染物扩散,效果最佳,同时排水沟日排水量可减少为1 878 m3.因此,当填埋场发生渗漏时,建议采用设置排水沟与周边地表硬化组合的地下水污染控制措施.