Response of the Plastic Lake catchment, Ontario, to reduced sulphur deposition

As a consequence of decreases in the emission rate of sulphur in eastern North America in the late 1970s and early 1980s, sulphate deposition in central Ontario declined by about 40%, but has remained constant for about six years. Plastic Lake, a small, dilute lake on the Precambrian shield that the authors have studied since 1979, acidified between the start of the study and about 1986, but since then has not changed. The authors also monitored the chemistry of streamwater draining the Plastic Lake catchment. Water quality of runoff from an upland site improved rapidly (pH and alkalinity increased, SO4(2-) and Al decreased), but two factors offset these improvements. A small wetland area downstream reversed most of these changes, resulting in a constant output of strong acid from the catchment. In addition, in extremely dry years (1983, 1987, 1989) there were very high concentrations of SO4(2-) in the streamwater, suggesting substantial re-oxidation of reduced S in the catchment.     

Comparative impacts of forest harvest and acid precipitation on soil and streamwater acidity

Annual H+ budgets were calculated for a catchment with a 65-year-old spruce-fir forest, and for an adjacent catchment at three years after a whole-tree harvest. In the harvested catchment sinks for H+ due to weathering and mineralization reactions were 85% greater, and sources of H+ due to biomass uptake were 60% greater than in the undisturbed catchment. There was an overall net consumption of 550 eq H+ ha(-1) year(-1) at year 3 after harvest compared to a net generation of 520 eq H+ ha(-1) year(-1) for the 65-year-old forest. Soil pH increased by 0.2-0.4 units soon after harvest, but there was little change in pH of streamwater from the harvested watershed. The whole-tree harvest resulted in a total production of about 30,000 eq H+ ha(-1) due to biomass removal. In contrast, wet and dry deposition at rates measured in this study could add more than 50,000 eq H+ ha(-1) in the 65-year period before the next harvest. Reducing the intensity of harvest may lessen long-term impacts of these sources of H+ on acidification of soils and streams.     

SWOT analysis of renewable energy sector in Mazowieckie Voivodeship (Poland): current progress,prospects and policy implications

Environment, Development and Sustainability - Renewable energy (RE) plays an increasingly important role in the economy of almost every country in the world. In order to examine the state of...     

Rate-temperature responses in scyphozoan medusae and polyps

The effects of temperature on oxygen consumption and spontaneous rhythmic activity have been investigated in various stages of the life histories of 3 species of jellyfish from the Chesapeake Bay, USA. All 3 species clearly show the ability to acclimate positively to temperature change. Thermal sensitivity of metabolism in the winter medusa Cyanea capillata fulva is fairly low at temperature intervals which are experienced in nature. Polyps of the two summer medusae, Chrysaora quinquecirrha and Aurelia aurita, show reduced metabolic sensitivity at temperatures normally accompanying high developmental activity and the onset of strobilation.     

‘Emulsion locks’ for the containment of hydrocarbons during surfactant flushing

Reversible double water in oil in water (W/O/W) emulsions were developed to contain subsurface hydrocarbon spills during their remediation using surfactant flushing. Double emulsions were prepared by emulsifying CaCl₂ solutions in canola oil, and subsequently by emulsifying the W/O emulsions in aqueous sodium alginate solutions. The formation of double emulsions was confirmed with confocal and optical microscopy. The double emulsions reversed and gelled when mixed with the surfactants sodium dodecyl sulfate (SDS) and cocamidopropyl betaine (CPB). Gels can act as ‘emulsion locks’ to prevent spreading of the hydrocarbon plume from the areas treated with surfactant flushing, as shown in sand column tests. Shear rheology was used to quantify the viscoelastic moduli increase (gelation) upon mixing the double emulsion with SDS and CPB. SDS was more effective than CPB in gelling the double emulsions. CPB and SDS could adsorb at the interface between water and model hydrocarbons (toluene and motor oil), lowering the interfacial tension and rigidifying the interface (as shown with a Langmuir trough). Bottle tests and optical microscopy showed that SDS and CPB produced W/O and O/W emulsions, with either toluene or motor oil and water. The emulsification of motor oil and toluene in water with SDS and CPB facilitated their flow through sand columns and their recovery. Toluene recovery from sand columns was quantitated using Gas-Chromatography Mass-Spectroscopy (GC-MS). The data show that SDS and CPB can be used both for surfactant flushing and to trigger the gelation of ‘emulsion locks’. Ethanol also gelled the emulsions at 100 mL/L.     

Simulation of a 100-MW solar-powered thermo-chemical air separation system combined with an oxy-fuel power plant for bio-energy with carbon capture and storage (BECCS)

The combination of concentrated solar power–chemical looping air separation (CSP-CLAS) with an oxy-fuel combustion process for carbon dioxide (CO₂) capture is a novel system to generate electricity from solar power and biomass while being able to store solar power efficiently. In this study, the computer program Advanced System for Process Engineering Plus (ASPEN Plus) was used to develop models to assess the process performance of such a process with manganese (Mn)-based oxygen carriers on alumina (Al₂O₃) support for a location in the region of Seville in Spain, using real solar beam irradiance and electricity demand data. It was shown that the utilisation of olive tree prunings (Olea europaea) as the fuel—an agricultural residue produced locally—results in negative CO₂ emissions (a net removal of CO₂ from the atmosphere). Furthermore, it was found that the process with an annual average electricity output of 18 MW would utilise 2.43% of Andalusia’s olive tree prunings, thereby capturing 260.5 k-tonnes of CO₂, annually. Drawbacks of the system are its relatively high complexity, a significant energy penalty in the CLAS process associated with the steam requirements for the loop-seal fluidisation, and the gas storage requirements. Nevertheless, the utilisation of agricultural residues is highly promising, and given the large quantities produced globally (~?4 billion tonnes/year), it is suggested that other novel processes tailored to these fuels should be investigated, under consideration of a future price on CO₂ emissions, integration potential with a likely electricity grid system, and based on the local conditions and real data.