Physiological responses of beet and cabbage plants exposed to copper and their potential insertion in human food chain

Environmental Science and Pollution Research - Copper (Cu) can be toxic to vegetables when it is absorbed and accumulated at large concentrations, a fact that increases the risk of excessive...     

Ecosystems for future generations

Environmental Science and Pollution Research -     

Solvent and surfactant enhanced solubilization, stabilization, and degradation of amitraz

In an effort to help with the development of effective dip vat management and waste disposal strategies this study determined how solution properties such as pH, buffer composition, ionic strength, temperature, solubility in organic solvents and the addition of commonly used solubilizing agents influenced the hydrolysis of amitraz. Amitraz degrade by means of hydrolysis described by a pseudo-first order rate process and a type ABCD pH rate profile. Hydrolysis increased with temperature and was fastest at low pH, slowest at neutral to slightly alkaline pH, and slightly increased above pH 10. However, buffer concentration and ionic strength influenced the hydrolysis rate and had to be accounted for before constructing a pH rate profile. Hydrolysis seems to depend on the dielectric constant of solvent mixtures and was fastest in water, slower in propylene glycol and ethanol solutions, and slowest in DMSO mixtures. In surfactant solutions, anionic micelles enhanced and cationic micelles retarded the hydrolysis rate. The magnitude of micellar effects decreased with increasing concentrations of the surfactants. The increased solubility and faster hydrolysis of amitraz in the sodium lauryl sulfate solutions showed that anionic surfactants potentially could be used for cleaning up amitraz spills, because it both solubilized the drug and catalyzed hydrolysis.     

Profile analysis of organic micropollutants in the environment of a coal burning area, NW Greece

The concentrations and profiles of dibenzo-p-dioxins, dibenzofurans, polychlorinated biphenyls and polynuclear aromatic compounds in various environmental matrices are presented in this study. The examined environmental matrices are total suspended particles, fly ash and soil collected in NW Greece, an area characterized by intensive coal burning for electrical power generation. Moreover, the occurrence of organic micropollutants in soot after an accidental fire was examined and the possible impact on the outdoor environment was evaluated. Results were statistically treated to obtain information on representative PCDD/F profiles in each matrix and to compare these profiles with the compositional patterns of possible sources from literature. Coal combustion, fly ash and vehicle exhausts appeared to be the most possible sources in local atmosphere.     

Oxidation of MCPA and 2,4-D by UV radiation, ozone, and the combinations UV/H2O2 and O3/H2O2

The phenoxyalkyl acid derivative herbicides MCPA (4-chloro 2-methylphenoxyacetic acid) and 2,4-D (2,4-dichlorophenoxyacetic acid) were oxidized in ultrapure water by means of a monochromatic UV irradiation and by ozone, as well as by the combinations UV/H2O2 and O3/H2O2. In the direct photolysis of MCPA, the quantum yield at 20 degrees C was directly evaluated and a value of 0.150 mol Eins(-1) was obtained in the pH range 5-9, while a lower value of 0.41 x 10(-2) mol Eins(-1) was determined at pH=3. Similarly, for 2,4-D a value of 0.81 x 10(-2) mol Eins(-1) was deduced, independent of the pH of work. The influence of the additional presence of hydrogen peroxide was established in the combined process UV/H2O2, and the specific contribution of the radical pathway to the global photo-degradation was evaluated. The oxidation by ozone and by the combination O3/H2O2 was also studied, with the determination of the rate constants for the reactions of both herbicides with ozone and hydroxyl radicals at 20 degrees C. These rate constants for the direct reactions with ozone were 47.7 and 21.9 M(-1) s(-1) for MCPA and 2,4-D respectively, while the found values for the rate constants corresponding to the radical reactions were 6.6 x 10(9) and 5.1 x 10(9) M(-1) s(-1).     

Prediction of the vertical profile of ozone based on ground-level ozone observations and cloud cover

A number of statistical techniques have been used to develop models to predict high-elevation ozone (O3) concentrations for each discrete hour of day as a function of elevation based on ground-level O3 observations. The analyses evaluated the effect of exclusion/inclusion of cloud cover as a variable. It was found that a simple model, using the current maximum ground-level O3 concentration and no effect of cloud cover provided a reasonable prediction of the vertical profile of O3, based on data analyzed from O3 sites located in North Carolina and Tennessee. The simple model provided an approach that estimates the concentration of O3 as a function of elevation (up to 1800 m) based on the statistical results with a +/- 13.5 ppb prediction error, an R2 of 0.56, and an index of agreement, d1, of 0.66. The inclusion of cloud cover resulted in a slight improvement in the model over the simple regression model. The developed models, which consist of two matrices of 24 equations (one for each hour of day for clear to partly cloudy conditions and one for cloudy conditions), can be used to estimate the vertical O3 profile based on the inputs of the current day's 1-hr maximum ground-level O3 concentration and the level of cloud cover.     

Biosensors for detection of mercury in contaminated soils

Biosensors based on whole bacterial cells and on bacterial heavy metal binding protein were used to determine the mercury concentration in soil. The soil samples were collected in a vegetable garden accidentally contaminated with elemental mercury 25 years earlier. Bioavailable mercury was measured using different sensors: a protein-based biosensor, a whole bacterial cell based biosensor, and a plant sensor, i.e. morphological and biochemical responses in primary leaves and roots of bean seedlings grown in the mercury-contaminated soil. For comparison the total mercury concentration of the soil samples was determined by AAS. Whole bacterial cell and protein-based biosensors gave accurate responses proportional to the total amount of mercury in the soil samples. On the contrary, plant sensors were found to be less useful indicators of soil mercury contamination, as determined by plant biomass, mercury content of primary leaves and enzyme activities.     

The uptake of uranium by Eleocharis dulcis (Chinese water chestnut) in the Ranger Uranium Mine constructed wetland filter

Eleocharis dulcis has proliferated in a constructed wetland used to treat uranium mine runoff water, where it rapidly accumulates significant quantities of uranium (U) in its roots and relatively little in its stems. We investigated the mechanism of U uptake and accumulation by E. dulcis using field-sampling techniques and microcosm test work. Results from the microcosm trials and outcomes from statistical tests of field sampled macrophyte, water and sediment indicate that the primary source of U for E. dulcis is the water column. Basipetal translocation of U to the plant's roots was indicated by significant correlations between the U content of stems, taproots and rhizomes and XPS detection of U inside root segments. U sequestering from sediment interstitial water by Fe hydroxides on root surfaces was also evident. No basipetal translocation was evident following the 28-day duration of the microcosm experiments, indicating that it is a longer-term process.     

Source apportionment of indoor, outdoor, and personal PM2.5 in Seattle, Washington, using positive matrix factorization

As part of a large exposure assessment and health-effects panel study, 33 trace elements and light-absorbing carbon were measured on 24-hr fixed-site filter samples for particulate matter with an aerodynamic diameter <2.5 microm (PM2.5) collected between September 26, 2000, and May 25, 2001, at a central outdoor site, immediately outside each subject's residence, inside each residence, and on each subject (personal sample). Both two-way (PMF2) and three-way (PMF3) positive matrix factorization were used to deduce the sources contributing to PM2.5. Five sources contributing to the indoor and outdoor samples were identified: vegetative burning, mobile emissions, secondary sulfate, a source rich in chlorine, and a source of crustal-derived material. Vegetative burning contributed more PM2.5 mass on average than any other source in all microenvironments, with average values estimated by PMF2 and PMF3, respectively, of 7.6 and 8.7 microg/m3 for the outdoor samples, 4 and 5.3 microg/m3 for the indoor samples, and 3.8 and 3.4 microg/m3 for the personal samples. Personal exposure to the combustion-related particles was correlated with outdoor sources, whereas exposure to the crustal and chlorine-rich particles was not. Personal exposures to crustal sources were strongly associated with personal activities, especially time spent at school among the child subjects.     

BETR-World: a geographically explicit model of chemical fate: application to transport of alpha-HCH to the Arctic

The Berkeley-Trent (BETR)-World model, a 25 compartment, geographically explicit fugacity-based model is described and applied to evaluate the transport of chemicals from temperate source regions to receptor regions (such as the Arctic). The model was parameterized using GIS and an array of digital data on weather, oceans, freshwater, vegetation and geo-political boundaries. This version of the BETR model framework includes modification of atmospheric degradation rates by seasonally variable hydroxyl radical concentrations and temperature. Degradation rates in all other compartments vary with seasonally changing temperature. Deposition to the deep ocean has been included as a loss mechanism. A case study was undertaken for alpha-HCH. Dynamic emission scenarios were estimated for each of the 25 regions. Predicted environmental concentrations showed good agreement with measured values for the northern regions in air, and fresh and oceanic water and with the results from a previous model of global chemical fate. Potential for long-range transport and deposition to the Arctic region was assessed using a Transfer Efficiency combined with estimated emissions. European regions and the Orient including China have a high potential to contribute alpha-HCH contamination in the Arctic due to high rates of emission in these regions despite low Transfer Efficiencies. Sensitivity analyses reveal that the performance and reliability of the model is strongly influenced by parameters controlling degradation rates.