Field evaluation of two diffusive samplers and two adsorbent media to determine 1,3-butadiene and benzene levels in air

Two types of diffusive samplers, both of which are compatible with thermal desorption, but differ in their geometry—SKC-Ultra (badge-type) and Radiello (radial symmetry-type)—were evaluated indoors and outdoors under varying temperature, humidity and wind speed conditions, using the graphitized adsorbents Carbopack X or Carbograph 5 to measure 1,3-butadiene and benzene in ambient air. The results obtained by diffusive sampling were compared with results obtained using a conventional active sampling method over both long (1 week) and shorter periods (6–24 h). Analysis and detection were performed using an automatic thermal desorber (ATD) connected to a gas chromatograph-flame ionization detector (GC/FID). Results from each sampler and adsorbent combination were examined using ordinary or multiple linear regression analysis. The overall uncertainty (OU) was also determined. In general, the results obtained with both samplers showed good agreement with those obtained by active sampling. Carbopack X appeared to be a more efficient adsorbent than Carbograph 5 for 1,3-butadiene, but the two adsorbents were equivalent for benzene. No effects of either humidity or air velocity were observed. Minor temperature effects were observed for both samplers for 1,3-butadiene. In summary, the results confirmed the accuracy of sampling rates previously determined for the two samplers and adsorbents. We consider the two samplers to be suitable for stationary and personal monitoring for the general population of 1,3-butadiene and benzene in various environments, indoors and outdoors. They are almost independent of meteorological conditions and may be suitable for monitoring industrial atmospheres.     

Sampling of polychlorinated aromatics in workroom air using Amberlite XAD-2 resin

Amberlite XAD-2 porous polymer was evaluated for the solid sampling of PCBs, PCNs, tri-, tetra-and pentachlorophenol in workroom air. Using solvent desorption, the recoveries of these compounds from XAD-2 was mostly about 80%, showing this adsorbent to be an excellent medium for the sampling of polychlorinated aromatics in air.     

Can NO(2) be used to indicate ambient and personal levels of benzene and 1,3-butadiene in air?

The aim of this study was to investigate the relation between two toxic volatile organic compounds, 1,3-butadiene and benzene, and a commonly used indicator of vehicle exhaust fumes, NO(2). This was to see if NO(2) can be used to indicate personal exposure to carcinogenic substances or at least estimate ambient levels measured at a stationary point. During the winter of 2001, 40 randomly selected persons living in the City of Umea (in the north of Sweden) were recruited to the study. Personal measurements of 1,3-butadiene, benzene and NO(2) were performed for one week, and were repeated for 20 of the 40 participants. Additional information was gathered using a diary kept by each participant. During the same time period weekly stationary measurements were performed at one urban background station and one street station in the city centre. The results from the personal measurements showed a negligible association of NO(2) with 1,3-butadiene (r= 0.06) as well as with benzene (r= 0.10), while the correlation coefficient between 1,3-butadiene and benzene was high and significant (r= 0.67). In contrast to the personal measurements, the stationary measurements showed strong relations between 1,3-butadiene, benzene and NO(2) both within and in-between the street and urban background station. This study supports NO(2) as a potential indicator for 1,3-butadiene and benzene levels in streets or urban background air, while the weak relations found for the personal measurements do not support the use of NO(2) as an indicator for personal 1,3-butadiene and benzene exposure.     

Evaluation of solid sorbents for sampling nitroglycerin,ethylene glycol dinitrate and isopropyl nitrate in work-room air

Activated charcoal, Amberlite XAD-2, and Amberlite XAD-7 have been evaluated for the solid sampling of airborne nitroglycerin, ethylene glycol dinitrate and isopropyl nitrate. With the use of diethyl ether for solvent desorption, XAD-2 was found superior for sampling nitroglycerin and ethylene glycol dinitrate. Both XAD-7 and activated charcoal gave high recoveries for isopropyl nitrate; charcoal had a greater capacity than XAD-7 for this compound, however.     

Evaluation of solid sorbents for sampling aliphatic and aromatic nitro compounds in work-room air

Amberlite XAD-2 and XAD-7 porous polymers were evaluated for the solid sampling of aliphatic and aromatic nitro compounds in work-room air. With the use of solvent desorption, XAD-2 gave 80–100% recovery of nitroaromatics, and XAD-7 85–100% recovery of nitroaliphatics. The compounds studied were nitromethane, nitroethane, 2-nitropropane, nitrobenzene, $\text{m}$-dinitrobenzene and 2,4,6-trinitrotoluene. All six compounds gave very poor recoveries from activated charcoal.     

Harmonized Nordic strategies for isocyanate monitoring in workroom atmospheres

The Nordic Network on Isocyanates (NORDNI) is financed by the Nordic Council of Ministers and is under the administration of Prof. Yngvar Thomassen and co-workers. National Institute of Occupational Health, Norway. The aim of NORDNI is to establish a broad network between the Nordic National Institutes of Occupational Health working within the field of isocyanate exposure and strategies for sampling and determination of isocyanates in workroom atmospheres. This viewpoint article summarizes the resolutions that were established at the 1st NORDNI consensus meeting arranged in Fr?ya, Norway, 31st August-2nd September, 2001. The consensus platform from the 1st NORDNI meeting was presented at the 4th International Symposium on Modern Principles of Air Monitoring, Lillehammer, Norway, 3-7 February, 2002.     

Correction to: Urban water and food security in this century and beyond: Resource-smart cities and residents

The urban world population will increase from 3 to 8.5 thousand million in the 21st century. Cities become hot spots of both demand for water and global food and for disposed used water and nutrients. Sustainability requires that resource flows through our cities are co-managed and connected to agriculture. Reduced use of harmful chemicals in consumer products facilitates treatment to a quality that allows reuse/recycling of water and nutrients. A solid and liquid waste hierarchy can assist in ordering measures. A novel flexible water balance can guide city infrastructure and keep toilet water separate. New water-saving equipment can substantially reduce water use without losing personal comfort. The combination of these new approaches ascertains access to safe urban water, and that recovered nutrients from cities can substitute half of chemical fertilisers needed in food production. Now, thousands of new cities and suburbs provide unique opportunities to develop resource-smart and sustainable flows.     

Solid chemosorbent for sampling sub-ppm levels of acrolein and glutaraldehyde in air

A personal air sampling method using Amberlite XAD-2 coated with 2,4-dinitrophenylhydrazine has been developed for acrolein and glutaral dehyde. Acrolein in the 0.01 to 1.2 mg/m³ range or glutaraldehyde in the 0.03 to 3.5 mg/m³ range is easily analysed in a 5 1 air sample. Recoveries are high (80–100%), and samples stable at least for two weeks if stored in the dark until analysed.