A Relaxed Eddy Accumulation System for the Automated Measurement of Atmospheric Ammonia Fluxes

A continuous relaxed eddy accumulation system ispresented for the automated measurement of surface/atmosphere exchange fluxes of atmospheric ammonia (NH₃) at a single height. The new system features sampling by parallel plate denuder inlets, online chemical analysis using the conductivity cell of a commercially available NH₃ analyzer and online flux calculation. The effective detection limit of the system for air concentrations is 0.2 g m^-3 and it is estimated to resolve fluxes > ± 20 ng m^-2 s^-1, depending on the NH₃ concentration and turbulence. The performance of the system was tested in two measurement campaigns above agricultural grassland, in which it was compared with a 3-point continuous gradient system. During the first campaign, after urea application of 47 kg N ha^-1 in autumn, the REA system derived fluxes which were on average twice as large as the gradient fluxes, while concentrations agreed closely (on average within 4%). Possible reasons include differences in the footprint and an over-correction of the gradient flux in stable conditions. Due to wet and cold conditions, only 0.3% of the fertilizer N was volatilized as NH₃ during the first week. Results from the deployment of an improved system are presented for a summer day, 6 days after fertilization with calcium ammonium nitrate. The agreement of both concentrations (on average within 13%) and fluxes (26%) was very encouraging and similar to the agreement found between two state-of-the-art gradient systems with online analysis.     

Seasonal variation of herbicide concentrations in prairie farm dugouts

Prairie farm dugouts are frequently constructed for use as potable water sources. Consequently, cumulative pesticide inputs via atmospheric deposition and surface runoff may constitute a risk to human health. Since, relative to other pesticides, herbicides are used in greatest amount on the Canadian prairies, herbicide concentrations were intensively monitored in three dugouts over three growing seasons. Herbicides were detected in the water of all three dugouts each growing season which may reflect cumulative inputs from atmospheric and surface processes over the lifetimes of the dugouts, which varied from 11 to 22 yr. Detections, which were not continuous, tended to be seasonal in nature. During the 3-yr study, detections were most frequent during the spring application period and late fall following dugout turnover. Between these periods, herbicide concentrations generally decreased to below detection limits. The reappearance of herbicides in the dugout water during fall turnover and in concentrations generally greater than those present during the spring application period suggest that, under appropriate environmental conditions, the bottom sediments may act as a source of herbicides to the water column. In general, herbicide inputs due to deposition of application drift did not result in detectable concentrations of herbicides in the dugouts. In the only year that winter samples were monitored, herbicides were also detected during ice cover. On the basis of monthly sampling over each growing season, median concentrations of 9 of the 10 herbicides monitored were less than 0.05 microg L(-1). The exception, 2,4-D, which has been used extensively on the Canadian prairies for more than 50 yr and in greatest amounts, was the most frequently detected herbicide. In no case did herbicide concentrations exceed Canadian drinking water guidelines; however, on occasion maximum herbicide concentrations did exceed aquatic life and irrigation water guidelines.     

Managing the career deal: the psychological contract as a framework for understanding career management,organizational commitment and work behavior

This paper reports the findings of a study that investigated the relationship between different kinds of career management activities, the psychological contract, and outcomes of psychological contract fulfillment. The study tested a series of linked hypotheses which propose that individual career management behavior is associated with the experience of organizational career management help, which is related to fulfillment of the psychological contract. Fulfillment of the psychological contract in turn is linked to organizational commitment and is associated with behaviors at work, including absenteeism, turnover, and independent ratings of job performance. The findings provide some support for these proposed links. As a result, the paper makes four contributions to the psychological contract and careers literature: first, it shows that both individual and organizational career management behaviors are linked to psychological contract fulfillment; second, organizational career management help is associated with affective commitment and job performance; third, psychological contract fulfillment plays a key role in mediating the relationship between career management help and such attitudes and behaviors; and fourth, organizational commitment may mediate between psychological contract fulfillment and individual career management behavior aimed at furthering the career outside the organization. Copyright © 2005 John Wiley & Sons, Ltd.     

Computer simulations help determine safe vertical boom speeds for roof bolting in underground coal mines

PROBLEM: Incident investigation reports do not usually contain enough information to aid in studying boom arm vertical speed for roof bolting machines to determine the impact that appendage speed had on an operator's risk of experiencing a contact. Laboratory experiments with human subjects are also not feasible because of safety and ethical issues. METHOD: Researchers successfully developed a three-dimensional computer model that uses virtual human simulation software as the primary means to gather contact data when the boom arm touches the operator's hand, arm, head, or leg. RESULTS: Data analysis of roof bolter simulations shows that the speed of the boom arm is the most important factor in determining the risk of an operator making contact. Regardless of other variables, contact incidents were always greater when the bolter arm was moving up, greater on the hand, and greater for the boom arm part of the machine. The reason why the subject experiences more contacts when the boom arm is moving up rather than down is that more risky behaviors occur during drilling and bolting when the boom arm is ascending. Based on the data collected, boom speeds greater than 13 in/sec result in a substantial increase in risk to the roof bolter operator of making contact. Speeds less than or equal to 13 in/sec are associated with a more modest relative risk of making contact, which represents a decrease in potential hazard. IMPACT ON INDUSTRY: The use of such information can be quite helpful in making recommendations to machine design and task procedures to reduce the likelihood that roof bolter operators will experience injury due to contact with a moving roof bolting machine's boom arm.     

Setting Site Specific Critical Loads: An Approach using Endorsement Theory and Dempster–Shafer

There is an increasing demand from conservation agencies for site-specific critical loads (CL); unfortunately, there is often very little specific information on a site to determine the important parameters needed to calculate the CL or on the spatial location of the “designated feature” in a site. Determining the most appropriate CL therefore involves using expert judegement to make decisions with incomplete and uncertain information. Endorsement Theory (Cohen, 1985) and Dempster–Shafer statistics (Dempster, 1967; Shafer, 1976) are, respectively, a decision-theoretic and a statistical technique for reasoning under those conditions (uncertainty and incompletness). A key reason for applying these techniques is that they make expert opinion explicit and available for scrutiny. Both techniques have been applied to the problem of setting an appropriate site specific CL, using heathland sites as a case study. Inital findings are encouraging; the uncertainty in expert judgement is made explict, the end results are intuitively reasonable and the methodology apparently acceptable to decision makers.     

An Integrated Approach to Reservoir Management: The Williston Reservoir Case Study

/ The management of industrial reservoirs for hydroelectric energy can cause severe impacts to surrounding communities. This study examines the generation of dust along the northern foreshore zones of Williston Reservoir in northern British Columbia. The dust is generated in the spring when the reservoir levels are low and impacts a relocated First Nations' village (Tsay Keh) at the north end of the reservoir. Data were gathered to provide an overview of the physical conditions that contribute to the dust problem, including a social survey, soil analysis, and vegetation inventory. The study provides a scoping method to assess a large-scale and complex problem with respect to dust management along a large reservoir. Methods for dust control include short- and long-term solutions that integrate the use of native vegetation along the foreshore zones of the reservoir.     

Simulating fish production using exponential smoothing

The variation over time of the total annual production of pe and the United Kingdom has been described quantitatively using the exponential smoothing technique. The exercise was repeated on annual mackerel landings for the same two countries. It is suggested that in some cases, the production figure for the current year can be used to simulate the following year's value. The greater variations in South Africa's annual production probably gave rise to the poorer results for these data.     

Operationalizing the outcomes of union commitment: The dimensionality of participation

In contrast to the past and current reliance upon a unidimensional or additive index of union participation, our research presents evidence of the multidimensional nature of the construct of union participation, a behavioral manifestation of union commitment. In this study, we examined a more diverse set of items than typically used in studies of union commitment and participation, ranging from holding union office to voting and to the more mundane, day-to-day activities which may take place in the workplace. Our results suggest three distinct dimensions to union participation, each representing potentially varying strengths of union commitment: an administrative factor reflecting office holding duties; an intermittent factor, reflecting participation in activities scheduled or available at particular times; and a supportive factor, reflecting on-going participative activities in support of other members of the union. Our findings further suggest these dimensions are relatively stable across time periods in two diverse samples: a retail worker sample and a nursing sample. Implications of the results are discussed.     

UK electricity requirements and the environmental and economic aspects of the development of the combined cycle power station

In the space of three to four years, gas has changed from being a premium fuel, not to be utilized in power stations, to virtually the only fuel being considered for future electricity generation in the UK. This paper reviews the growth in the use of gas for electricity generation within the UK, with particular regard to the adoption of the gas-fired combined cycle power station. The environmental, economic and strategic issues associated with the proposed development of approximately 27 GW of new gas-fired plant are analysed and the resulting effects on existing base load power plant within the UK are considered.Dr James W.S. Longhurst is Director of the Atmospheric Research and Information Centre, ARIC, at Manchester Metropolitan University He is an environmental scientist who has specialized in the air quality impacts of transport and energy. He holds a BSc, MSc and PhD in Environmental Science from, Plymouth Polytechnic, Aston University and Birmingham University, respectively. He has written numerous papers, consultancy reports, books and technical reports since 1986.Jane Bantock joined ARIC in 1992 with a degree in Environmental Studies from Manchester Polytechnic. She jointly manages ARIC's information and education programmes. Her research interests include the inter-relationship of UK energy policy and emission control in the electricity generating sector, the subject of her part time PhD, and urban air quality issues.     

Can progress in reducing alcohol-impaired driving fatalities be resumed? Results of a workshop sponsored by the Transportation Research Board,Alcohol, Other Drugs,and Transportation Committee (ANB50)

Objective: Despite successes in the 1980s and early 1990s, progress in reducing impaired driving fatalities in the United States has stagnated in recent years. Since 1997, the percentage of drivers involved in fatal crashes with illegal blood alcohol concentration (BAC) levels has remained at approximately 20 to 22%. Many experts believe that public complacency, competing social and public health issues, and the lack of political fortitude have all contributed to this stagnation. The number of alcohol-related crashes, injuries, and fatalities is still unacceptable, and most are preventable. The public needs to be aware that the problem presented by drinking drivers has not been solved. Political leaders need guidance on which measures will affect the problem, and stakeholders need to be motivated once again to implement effective strategies.

Methods: The National Academy of Sciences (NAS) Transportation Research Board (TRB), Alcohol, Other Drugs, and Transportation Committee (ANB50) sponsored a workshop held at the NAS facility in Woods Hole, Massachusetts, on August 24–25, 2015, to discuss the lack of progress in reducing impaired driving and to make recommendations for future progress. A total of 26 experts in research and policy related to alcohol-impaired driving participated in the workshop. The workshop began by examining the static situation in the rate of alcohol-impaired driving fatal crashes to determine what factors may be inhibiting further progress. The workshop then discussed 8 effective strategies that have not been fully implemented in the United States. Workshop participants (16 of the 26) rated their top 3 strategies.

Results: 3 strategies received the most support: 1. Impose administrative sanctions for drivers with BACs = 0.05 to 0.08 g/dL.

2. Require alcohol ignition interlocks for all alcohol-impaired driving offenders.

3. Increase the frequency of sobriety checkpoints, including enacting legislation to allow them in the 11 states that currently prohibit them.

5 other important strategies included the following: (1) increase alcohol taxes to raise the price and reduce alcohol consumption; (2) reengage the public and raise the priority of impaired driving; (3) lower the illegal per se BAC limit to 0.05 for a criminal offense; (4) develop and implement in-vehicle alcohol detection systems; and (5) expand the use of screening and brief interventions in medical facilities.

Conclusions: Each of these strategies is proven to be effective, yet all are substantially underutilized. Each is used in some jurisdictions in the United States or Canada, but none is used extensively. Any one of the 3 strategies implemented on a widespread basis would decrease impaired driving crashes, injuries, and fatalities. Based on the research, all 3 together would have a substantial impact on the problem.