Genotoxicity monitoring of freshwater environments using caged crayfish (Astacus leptodactylus)

Genotoxicity of freshwater pollution was assessed by measuring DNA damage in haemocytes of caged freshwater crayfish Astacus leptodactylus by the means of Comet assay and micronucleus test, integrated with the measurements of physiological (total protein concentration) and immunological (total haemocyte count) haemolymph parameters as biomarkers of undergone stress. Crayfish were collected at the reference site (River Mre?nica) and exposed in cages for 1 week at three polluted sites along the Sava River (Zagreb, Sisak, Krapje). The long term pollution status of these locations was confirmed by chemical analyses of sediments. Statistically significant increase in DNA damage measured by the Comet assay was observed at all three polluted sites comparing to the crayfish from reference site. In addition, native crayfish from the mildly polluted site (Krapje) cage-exposed on another polluted site (Zagreb) showed lower DNA damage than crayfish from the reference site exposed at the same location indicating adaptation and acclimatisation of crayfish to lower levels of pollution. Micronuclei induction showed similar gradient of DNA damage as Comet assay, but did not reach the statistical significance. Observed increase in total haemocyte count and total protein content in crayfish from polluted environments in the Sava River also confirmed stress caused by exposure to pollution. The results of this study have proved the applicability of caging exposure of freshwater crayfish A. leptodactylus in environmental genotoxicity monitoring using Comet assay and micronucleus test.     

Forest Naturalness: Criterion for Decision Support in Designation and Management of Protected Forest Areas

The article analyses the possibilities of developing an integrated indicator and a model of the assessment of forests naturalness using the data from the database of mountainous spruce forests situated in the Western Carpathians of Slovakia. The article presents two variants of such a model, one based on discriminant analysis, while the second one using an additive approach. The analysis of the data from mountainous spruce forests revealed significant indicators of forest naturalness degree: the arithmetic mean of the ratio between crown length and tree height, the deadwood volume, the coverage of grasses, the coverage of mosses and lichens, and the aggregation index. In addition, the coefficient of variation of tree diameters was included in the final model, since its presence in the model had a positive influence on the correctness of the classification of the forest naturalness degree. The correctness of the classification of the proposed discriminant model was 74.5%. For the additive model, the ranges of the values of the integrated indicator were defined for every degree of forest naturalness by taking into account the error ranges of the arithmetic mean values and the percentiles of the values in individual degrees of forest naturalness. The overall correctness of the classification with the additive model was 63.4%. In the second step, the scheme how to apply the classification model of the forest naturalness degree in the decision-making process of designating as a forest protected areas was proposed. In this scheme, the degree of forest naturalness is considered as a basic criterion for the determination of nature-conservation value of forest ecosystems. As further decision-making criteria we identified the possibility to restore, or the possibility to improve the naturalness of less natural forest ecosystems, which are designated as protected; the occurrence of the endangered species; and the occurrence of other natural values.     

Photosynthetic and biochemical characteristics of invasive species (<Emphasis Type="Italic">Ambrosia artemisiifolia L., Ambrosia trifida L.</Emphasis> and <Emphasis Type="Italic">Iva xanthifolia Nutt.</Emphasis>) depending on soil humidity and phenological phase

Environmental factors like temperature and soil humidity are recognized as influencing factors on photosynthetic response and organic productivity, distribution and biochemical characteristics of plants. Here we present measurements of gas exchange parameters, water-use efficiency (WUE) and nitrogen-use efficiency (NUE) of field-grown invasive species Ambrosia artemisiifolia L., Ambrosia trifida L. and Iva xanthifolia Nutt., in order to define their potentials as colonizers. Biogenic volatile organic compounds (BVOC) in leaves and flowers depending on soil humidity were also investigated.     

Effect of soil and sediment composition on acetochlor sorption and desorption

Background, aim, and scope  Herbicide fate and its transport in soils and sediments greatly depend upon sorption–desorption processes. Quantitative determination of herbicide sorption–desorption is therefore essential for both the understanding of transport and the sorption equilibrium in the soil/sediment–water system; and it is also an important parameter for predicting herbicide fate using mathematical simulation models. The total soil/sediment organic carbon content and its qualitative characteristics are the most important factors affecting sorption–desorption of herbicides in soil or sediment. Since the acetochlor is one of the most frequently used herbicides in Slovakia to control annual grasses and certain annual broad-leaved weeds in maize and potatoes, and posses various negative health effects on human beings, our aim in this study was to investigate acetochlor sorption and desorption in various soil/sediment samples from Slovakia. The main soil/sediment characteristics governing acetochlor sorption–desorption were also identified. Materials and methods  The sorption–desorption of acetochlor, using the batch equilibration method, was studied on eight surface soils, one subsurface soil and five sediments collected from the Laborec River and three water reservoirs. Soils and sediments were characterized by commonly used methods for their total organic carbon content, distribution of humus components, pH, grain-size distribution, and smectite content, and for calcium carbonate content. The effect of soil/sediment characteristics on acetochlor sorption–desorption was examined by simple correlation analysis. Results  Sorption of acetochlor was expressed as the distribution coefficient (K _d). K _d values slightly decreased as the initial acetochlor concentration increased. These values indicated that acetochlor was moderately sorbed by soils and sediments. Highly significant correlations between the K _d values and the organic carbon content were observed at both initial concentrations. However, sorption of acetochlor was most closely correlated to the humic acid carbon, and less to the fulvic acid carbon. The total organic carbon content was found to also significantly influence acetochlor desorption. Discussion  Since the strong linear relationship between the K _d values of acetochlor and the organic carbon content was already released, the corresponding K _oc values were calculated. Considerable variation in the K _oc values suggested that other soil/sediment parameters besides the total soil organic carbon content could be involved in acetochlor sorption. This was revealed by a significant correlation between the K _oc values and the ratio of humic acid carbon to fulvic acid carbon (C_HA/C_FA). Conclusions  When comparing acetochlor sorption in a range of soils and sediments, different K _d values which are strongly correlated to the total organic carbon content were found. Concerning the humus fractions, the humic acid carbon content was strongly correlated to the K _d values, and it is therefore a better predictor of the acetochlor sorption than the total organic carbon content. Variation in the K _oc values was attributed to the differences in distribution of humus components between soils and sediments. Desorption of acetochlor was significantly influenced by total organic carbon content, with a greater organic carbon content reducing desorption. Recommendations and perspectives  This study examined the sorption–desorption processes of acetochlor in soils and sediments. The obtained sorption data are important for qualitative assessment of acetochlor mobility in natural solids, but further studies must be carried out to understand its environmental fate and transport more thoroughly. Although, the total organic carbon content, the humus fractions of the organic matter and the C_HA/C_FA ratio were sufficient predictors of the acetochlor sorption–desorption. Further investigations of the structural and chemical characteristics of humic substances derived from different origins are necessary to more preciously explain differences in acetochlor sorption in the soils and sediments observed in this study.     

Medical waste management in Turkey: A case study of Istanbul

The objective of this study was to analyze the present status of medical waste management in the light of the Medical Waste Control Regulation (MWCR) in Istanbul, the largest city in Turkey. About 17% of the hospitals, 20% of bed capacity, and 54% of private hospitals in Turkey are located in Istanbul. The first regulation about medical waste management in Turkey was published in 1993, and as a candidate state, it was changed in 2005 in accordance with EU Environmental Directives. In this work, a survey of 14 questions about the amount, collection, and temporary storage of medical wastes was applied to 192 hospitals in Istanbul through face-to-face interviews. It was found that the estimated quantity of medical waste from the hospitals is about 22tons/day and the average generation rate is 0.63kg/bed-day. Recyclable materials are collected separately at a rate of 83%. Separate collection of different types of wastes is consistently practiced, but 25% of the hospitals still use inappropriate containers for medical waste collection. Almost 77% of the hospitals use appropriate equipment for the medical waste collection personnel. The percentage of the hospitals that have temporary storage depots is 63%. Medical waste management in Istanbul is carried out by applying the MWCR.     

上海市区降水径流磷的负荷空间分布

选择城市降水径流，采用实地降水径流的样品、室内化学分析相结合的方法，研究了上海市区降水径流中营养元素P的负荷及其地区分布特征。研究结果表明，城市降水径流中P具有较高的含量水平，其DOP、DIP和TP的均值含量分别为0．136、0．177和0．313mg/L。从城市降水径流中P负荷的空间分布来看、除农业区P含量较低外，其他功能区P含量普遍较高，其中居住区TP含量最高，达0．487mg/L。此外，新老居住区P含量也存在明显差异，前者远小于后者。     

我国重金属环境标准发展对策

我国重金属污染严重,研究制定严格的环境标准是从源头解决重金属污染的根本所在。本文在综合国内外重金属标准的制定情况基础上,研究提出：强化环境标准,确立保障人体健康的核心地位;要综合考虑重金属排放标准与环境质量标准的协同;强化重金属环境基准的研究,提高环境标准的可达性。     

沿海丘陵地形区域大气环境质量预测模式体系

介绍了一套适合沿海丘陵地形条件的区域大气环境质量预测体系,它主要由局地扩散模式（ＨＰＤＭ模式,Ｍｉｓｒａ模式）、中尺度气象场模式和区域扩散模式（分段烟流模式）组成,该系统具有较快的计算速度。同时文章对气象场模式中所采用的三维准静力动力学模型在地形追随坐标下的形式进行了较完整的描述,对变换后湍流扩散项的近似取舍进行讨论并且对传统的分段烟流模式的分段烟流作了连续性定义的改进。     

Consolidation of degraded ornamental porous limestone stone by calcium carbonate precipitation induced by the microbiota inhabiting the stone

Although it has already been shown that calcareous stone can be consolidated by using a bacterially inoculated culture medium, a more user-friendly method is the in situ application of a sterile culture medium that is able to activate, among the microbial community of the stone, those bacteria with a potential for calcium carbonate precipitation. In order to test this new method for stone consolidation, non-sterilized decayed porous limestone was immersed in sterile nutritional media. Results were compared to those of the runs in which stone sterilized prior to the treatment was used. The effects of the microbial community on stone consolidation were determined by recording the evolution of the culture media chemistry. The treated stone was tested for mechanical resistance and porosity. Results demonstrate that the tested media were able to activate bacteria from the microbial community of the stone. As a consequence of the growth of these bacteria, an alkalinization occurred that resulted in calcium carbonate precipitation. The new precipitate was compatible with the substrate and consolidated the stone without pore plugging. Therefore, a good candidate to in situ consolidate decayed porous limestone is the application of a sterile culture medium with the characteristics specified in the present study.