Mean annual (222)Rn concentration in homes located in different geological regions of Poland: first approach to whole country area

The paper presents the results of year-long measurements of radon (²²²Rn) concentration inside 129 buildings in Poland in relation to the geological conditions of their foundation. The authors took into account the division of the country into tectonic units, as well as the lithology of the rocks forming the bedrock of these buildings. As expected, the highest value of mean annual ²²²Rn concentration (845 Bq/m³) was recorded in a building situated in the area of the Sudetes, while the highest geometric mean (characteristic of the expected log-normal data distribution) was calculated based on measurements from buildings located within the East-European craton, in the area of Mazury-Podlasie monocline, where it reached 231 Bq/m³. Such results reflect geological conditions - the occurrence of crystalline rocks (especially U- and Ra-enriched granites and orthogneisses) on the surface in the Sudetes, and of young post-glacial sediments containing fragments of Scandinavian crystalline rocks, also enriched with U and Ra, in the area of Mazury-Podlasie monocline. However, the least expected result of the investigations was finding out that, contrary to the hitherto widespread belief, none of the major tectonic units of Poland can be excluded from the list of those containing buildings with mean annual ²²²Rn concentration exceeding 200 Bq/m³. The mean annual concentration of radon for all the buildings were much higher than the mean concentration value (49.1 Bq/m³) of indoor radon in Poland quoted so far. These results cast a completely new light on the necessity to perform measurements of radon concentration in residential buildings in Poland, no more with reference to small areas with outcrops of crystalline rocks (especially the Sudetes, being the Polish fragment of the European Variscan belt), but for all the major tectonic units within Poland.     

Profiling the spatial concentration of allethrin and piperonyl butoxide using passive sorptive sampling and thermal desorption capillary GC-MS

Spatial concentration distribution of a chemical in an indoor environment is an important factor in the evaluation of chemical nuisances. However, straightforward techniques for the determination of this distribution are not very common and usually limited in their application. Sorptive sampling using polydimethylsiloxane-coated stir bars and the combination of active and diffusive sampling were shown to allow uncomplicated spatial concentration profiling of multiple compounds in an indoor environment. The validity of the approach was demonstrated in the analysis of the spatial concentration distribution of a pyrethroid insecticide in a common bedroom. The relative concentrations of allethrin and piperonyl butoxide were profiled throughout the room upon the application of an insecticide vaporizer.     

Accuracy of assessing the level of impulse sound from distant sources.

Impulse sound events are characterised by ultra high pressures and low frequencies. Lower frequency sounds are generally less attenuated over a given distance in the atmosphere than higher frequencies. Thus, impulse sounds can be heard over greater distances and will be more affected by the environment. To calculate a long-term average immission level it is necessary to apply weighting factors like the probability of the occurrence of each weather condition during the relevant time period. This means that when measuring impulse noise at a long distance it is necessary to follow environmental parameters in many points along the way sound travels and also to have a database of sound transfer functions in the long term. The paper analyses the uncertainty of immission measurement results of impulse sound from cladding and destroying explosive materials. The influence of environmental conditions on the way sound travels is the focus of this paper.     

Cemetery waste as a substream of municipal waste: research and structure of the selective waste collection in Poland

Environmental Science and Pollution Research - Cemetery waste (CW) constitutes one of the streams of municipal waste (MW). Based on the available data, it can be said that it accounts for about 1%...     

A roadmap for the conservation of freshwater mussels in Europe

Europe has a long history of human pressure on freshwater ecosystems. As pressure continues to grow and new threats emerge, there is an urgent need for conservation of freshwater biodiversity and its ecosystem services. However, whilst some taxonomic groups, mainly vertebrates, have received a disproportionate amount of attention and funds, other groups remain largely off the public and scientific radar. Freshwater mussels (Bivalvia, Unionida) are an alarming example of this conservation bias and here we point out six conceptual areas that need immediate and long-term attention: knowledge, threats, socioeconomics, conservation, governance and education. The proposed roadmap aims to advance research, policy and education by identifying the most pressing priorities for the short- and long-term conservation of freshwater mussels across Europe.     

A laboratory technique for investigation of diffusion and transformation of volatile organic compounds in low permeability media

A laboratory diffusion cell technique that permits spatial and temporal estimates of porewater concentrations over short intervals suitable for estimation of effective diffusion coefficients (De) and degradation rate constants (k) of volatile organic compounds (VOCs) in saturated low permeability media is presented. The diffusion cell is a sealed cylinder containing vapour reservoirs for sampling, including a vapour reservoir source and an array of vapour-filled "mini-boreholes", which are maintained water- and sediment-free by slightly negative porewater pressures. The vapour reservoirs were sampled by Solid Phase Micro-Extraction (SPME), resulting in minimal disturbance to the experimental system. Porewater concentrations are estimated from the measured vapour concentrations. Experiments were conducted using a non-reactive medium and five VOCs with a range in partitioning properties. Calibration experiments showed that equilibrium partition coefficients could be used for calculating concentrations in the vapour reservoir source from concentrations in the SPME coating after a 1-min microextraction and that the reservoir concentration was insignificantly affected by sampling. However, equilibrium was not reached during the one-min extraction of the boreholes; the microextraction reduced the borehole vapour concentrations, leading to diffusion of VOCs from porewater into the vapour-filled borehole. Thus, empirical partitioning coefficients were required for the determination of porewater VOC concentrations. The experimental data and numerical modelling indicate masses extracted by SPME extraction are relatively small, with minimal perturbation on processes studied in diffusion experiments. This technique shows promise for laboratory investigation of diffusion and transformation processes in low permeability media.     

Betaine removal during thermo- and mesophilic aerobic batch biodegradation of beet molasses vinasse: influence of temperature and pH on the progress and efficiency of the process

The key issue in achieving a high extent of biodegradation of beet molasses vinasse is to establish the conditions for the assimilation of betaine, which is the main pollutant in this high-strength industrial effluent. In the present study, aerobic batch biodegradation was conducted over the temperature range of 27-63°C (step 9°C), at a pH of 6.5 and 8.0, using a mixed culture of bacteria of the genus Bacillus. Betaine was assimilated at 27-54°C and the pH of 8.0, as well as at 27-45°C and the pH of 6.5. The processes where betaine was assimilated produced a high BOD(5) removal, which exceeded 99.40% over the temperature range of 27-45°C at the pH of 8.0, as well as at 27°C and the pH of 6.5. Maximal COD removal (88.73%) was attained at 36°C and the pH of 6.5. The results indicate that the process can be applied on an industrial scale as the first step in the treatment of beet molasses vinasse.