Assessment of organotin pollution along the Polish coast (Baltic Sea) by using mussels and fish as sentinel organisms

Levels of tributyltin (TBT) and its degradation products, mono- (MBT) and dibutyltin (DBT), as well as triphenyltin (TPT), were monitored in 10 stations along the Polish coast (Baltic Sea). Mussel-Mytilus edulis-and fish-Platichthys flesus-were used as sentinel organisms. The bioaccumulation patterns of butyltin and phenyltin compounds varied substantially. Butyltins were detected in mussel tissue from all the sampled stations. Among them, organisms from the Gulf of Gdansk showed the highest residues (68 ng/g w.w. as Sn) in conjunction with elevated TBT/DBT ratios, which suggest recent inputs of TBT in the area. Additionally, flatfish were sampled in the Gulf of Gdansk, and different tissues (liver, digestive tube and gills) were analyzed separately. TPT, although undetected in mussels, was always present in fish. The highest organotin concentration was observed in the liver (369 ng/g w.w. as Sn) of fish caught near Gdansk port. Relatively high concentrations were observed in digestive tube, which points out the ingestion of organotin contaminated food as an important uptake route of those compounds in P. flesus.     

Horizontal and vertical variabilities of mercury concentration and speciation in sediments of the Gdansk Basin,Southern Baltic Sea

The mercury compounds introduced to the environment because of anthropogenic activity are accumulated, mainly, in marine sediments. Both distribution of mercury in the Baltic Sea and factors affecting it are remain largely unknown. Due to its complex chemistry and variable conditions in the Baltic Sea bottom sediments, mercury may be reemitted to the overlaying water, and thus to the environment.The aim of this study was twofold. Total mercury contents were measured in sediments of the Gdansk Basin along a Vistula mouth (main source)--Gdansk Deep (deposition area) transect in order to assess spatial distribution of the element. Soft and sandy bottom sediment cores were collected and cut into slices. The mercury measurements consisted of acid digestion followed by CV-AAS determination. A five-step sequential extraction procedure involving measurements of mercury species water soluble, bound to humic substances and insoluble, was employed in order to investigate mercury speciation. On the basis of speciation results stability and remobilisation potential was assessed. The second aim was demonstrating that mercury gradients in vertical profiles of the investigated sediment cores exist.Total mercury contents varied in range from 28 ng/g x dw to 844 ng/g. Mercury associated with organic matter and sulphides, (respectively 39% and 49%) were the dominant species of the element. The results indicated that the river run-off is a source of mercury in the area. Vertical gradients of both total content and speciation of mercury in the soft sediments were attributed to both remobilisation from sediments, and decreasing trend in the anthropogenic load of the element deposited to sediments.     

The contribution from shipping emissions to air quality and acid deposition in Europe

A global three-dimensional Lagrangian chemistry-transport model STOCHEM is used to describe the European regional acid deposition and ozone air quality impacts along the Atlantic Ocean seaboard of Europe, from the SO2, NOx, VOCs and CO emissions from international shipping under conditions appropriate to the year 2000. Model-derived total sulfur deposition from international shipping reaches over 200 mg S m(-2) yr(-1) over the southwestern approaches to the British Isles and Brittany. The contribution from international shipping to surface ozone concentrations during the summertime, peaks at about 6 ppb over Ireland, Brittany and Portugal. Shipping emissions act as an external influence on acid deposition and ozone air quality within Europe and may require control actions in the future if strict deposition and air quality targets are to be met.     

Ventilation mode changes our safety in buses: Study on “air-rain” flow against chemical and arson attack in public transport vehicles

Objectives: Public transport vehicles (PTVs) play a decisive role in development of the urban economy. However, the safety of PTVs is threatened by the man-released chemical or arson attack. It was found that indoor air safety can be greatly improved by employing air-rain ventilation instead of the common ventilation in a PTV.

Methods: Numerical simulations and experiments have been done to prove the effectiveness of the air-rain flow against chemical attack or arson in PTVs.

Results: The research shows that, during a chemical attack, an air-rain flow of 0.1 m/s can constrain the spread of a chemical agent in a very limited zone near its source, which is far away from the passengers’ breathing area in the PTV. During an arson attack, at an air-rain flow of 0.3 m/s, most of the area in the PTV maintains a low temperature for at least 60?s during a fire, which is long enough for passenger evacuation.

Conclusion: Compared to common ventilation, the key characteristic of air-rain ventilation is its resistance to the blending effect of the air. Because of this, the spread of chemical agents, hot gas/combustion products during a fire, and fuel aerosol is constrained to a limited area in a PTV. Passengers are then protected from chemical attack, explosion of fuel aerosols, and high temperatures and smoke. Thus, we can say that this new ventilation mode increases passenger safety in buses.     

OPTIMIZATION OF WATER RESOURCES FOR IRRIGATION IN EAST JORDAN1

The paper describes an approach towards optimal allocation of surface and ground water resources to three agricultural areas in the Jordan Valley under conditions of scarce water supply. The optimizing model allocates water from three main rivers, each with reservoir storage, and from two ground water sources to three irrigation regions. Productivity of irrigation water, expressed as the net present value of the regional agricultural output, but allowing for crop water deficits, is first maximized using nonlinear programming. The allocation process then adopts techniques of linear programming to determine the least cost alternative based on the unit cost of water from each resource at each destination, as it varies with time.     

Methods for determination of elemental carbon in ambient air

A few analytical methods of elemental carbon determination are described. The purpose of the work is to choose the best method for determination of its content in dust suspended in air in industrial regions. The reflectance and chromatographic methods were investigated. It was shown that the reflectance methods could be used only when the particle size and form of elemental carbons constant. The chromatographic method, which includes the step of combustion of the sample in oxygen and chromatographic determination of evolved CO₂ is recommended, since it is independent of the form of carbon. Organic carbon is removed from dust samples by extraction with benzene-methanol mixture.     

A New Approach to Chemical Recycling of Polyamide 6.6 and Synthesis of Polyurethanes with Recovered Intermediates

A new efficient method for the chemical decomposition of polyamide 6.6 by the glycolysis and amino-glycolysis processes was proposed. The glycolysis was conducted using the mass excess of ethylene glycol (EG) as a decomposing agent in the presence of a catalyst. Also, a mixture of EG and triethylenetetramine was used as another decomposing agent in the amino-glycolysis process. The described process of decomposition did not require the use of elevated pressure. The hydroxyl and amine numbers, rheology behavior and the presence of characteristic chemical groups in the obtained glycolysates and aminoglycolysates were determined in order to characterize the reaction products. The decomposition products were defined as non-Newtonian fluids that could be described by suitable mathematical models. The conducted studies showed that the properties of the obtained intermediates depend on the mass excess of the decomposing agent used. The resulting semi-products are suitable for reusing in the synthesis of polyurethanes, which has been confirmed by the exemplary synthesis. In the reaction, 10 and 15 wt% of commercial polyol were replaced with the recovered intermediates.     

Validation and use of in vivo solid phase micro-extraction (SPME) for the detection of emerging contaminants in fish

A variety of emerging chemicals of concern are released continuously to surface water through the municipal wastewater effluent discharges. The ability to rapidly determine bioaccumulation of these contaminants in exposed fish without sacrificing the animal (i.e. in vivo) would be of significant advantage to facilitate research, assessment and monitoring of their risk to the environment. In this study, an in vivo solid phase micro-extraction (SPME) approach was developed and applied to the measurement of a variety of emerging contaminants (carbamazepine, naproxen, diclofenac, gemfibrozil, bisphenol A, fluoxetine, ibuprofen and atrazine) in fish. Our results indicated in vivo SPME was a potential alternative extraction technique for quantitative determination of contaminants in lab exposures and as well after exposure to two municipal wastewater effluents (MWWE), with a major advantage over conventional techniques due to its ability to non-lethally sample tissues of living organisms.     

Thermal Solid State Reactions of Potato Starch with α-Hydroxy Acids

The numerous applications of dextrins resulting from the heating of potato starch with α-amino acids prompted me to check the thermal reactions of starch with hydroxy acids and their lactones, such as citric acid, lactic acid, tartaric acid, and coumarine. The course of reactions was observed by means of Simultaneous TG/DSC Thermal Analyser. The thermal reactions were carried out on convectional and microwave heating. The course of reactions under such conditions was compared and properties of resulting dextrins were recognized. The structure and properties of products were obtained from FTIR spectra, water solubility tests, and pH measurements. It was found, that hydroxy acids and/or products of their thermal transformations reacted with starch and/or resulting dextrins producing esters or crosslinking esterification of dextrins took place. The properties of new dextrins were presented in order to check, in further studies, their application for selective flotation of complex metal ores and their suitability as prebiotics.     

Thermally Induced Reaction of Potato Starch with Thiourea

Thermally induced reaction of thiourea with potato starch was carried out with involvement of either conventional or microwave heating. Under applied reaction conditions conventional heating provided a higher degree of transformation. The course of reaction was complex. Thiourea reacted with starch but the reaction products underwent further decompositions. Dextrins contaminated with isothiocyanates were obtained. Not necessarily they underwent alpha-amylolysis more readily than original starch.