Improvement in rice straw pulp bleaching effluent quality by incorporating oxygen delignification stage prior to elemental chlorine-free bleaching

Environmental degradation by industrial and other developmental activities is alarming for imperative environmental management by process advancements of production. Pulp and paper mills are now focusing on using nonwood-based raw materials to protect forest resources. In present study, rice straw was utilized for pulp production as it is easily and abundantly available as well as rich in carbohydrates (cellulose and hemicelluloses). Soda-anthraquinone method was used for pulp production as it is widely accepted for agro residues. Bleaching process during paper production is the chief source of wastewater generation. The chlorophenolic compounds generated during bleaching are highly toxic, mutagenic, and bioaccumulative in nature. The objectives of study were to use oxygen delignification (ODL) stage prior to elemental chlorine-free (ECF) bleaching to reduce wastewater load and to study its impact on bleached pulp characteristics. ODL stage prior to ECF bleaching improved the optical properties of pulp in comparison to only ECF bleaching. When ODL stage was incorporated prior to bleaching, the tensile index and folding endurance of the pulp were found to be 56.6 ± 1.5 Nm/g and 140, respectively, very high in comparison to ECF alone. A potential reduction of 51, 57, 43, and 53% in BOD₃, COD, color, and AOX, respectively was observed on adding the ODL stage compared to ECF only. Generation of chlorophenolic compounds was reduced significantly. Incorporation of ODL stage prior to bleaching was found to be highly promising for reducing the toxicity of bleaching effluents and may lead to better management of nearby water resources.

Open image in new window

Graphical abstract ?

     

Evaluation of hexachlorocyclohexane contamination from the last lindane production plant operating in India

Purpose

??-Hexachlorocyclohexane (HCH), ??-HCH, and lindane (??-HCH) were listed as persistent organic pollutants by the Stockholm Convention in 2009 and hence must be phased out and their wastes/stockpiles eliminated. At the last operating lindane manufacturing unit, we conducted a preliminary evaluation of HCH contamination levels in soil and water samples collected around the production area and the vicinity of a major dumpsite to inform the design of processes for an appropriate implementation of the Convention.

Methods

Soil and water samples on and around the production site and a major waste dumpsite were measured for HCH levels.

Results

All soil samples taken at the lindane production facility and dumpsite and in their vicinity were contaminated with an isomer pattern characteristic of HCH production waste. At the dumpsite surface samples contained up to 450?g?kg^?1 ?? HCH suggesting that the waste HCH isomers were simply dumped at this location. Ground water in the vicinity and river water was found to be contaminated with 0.2 to 0.4?mg?l^?1 of HCH waste isomers. The total quantity of deposited HCH wastes from the lindane production unit was estimated at between 36,000 and 54,000?t.

Conclusions

The contamination levels in ground and river water suggest significant run-off from the dumped HCH wastes and contamination of drinking water resources. The extent of dumping urgently needs to be assessed regarding the risks to human and ecosystem health. A plan for securing the waste isomers needs to be developed and implemented together with a plan for their final elimination. As part of the assessment, any polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF) generated during HCH recycling operations need to be monitored.     

Ionic dye adsorption by zinc oxide nanoparticles

The adsorption behaviour of Basic Red 12, Acid Orange 7 and Acid Blue 1 on zinc oxide nanoparticles (ZNP) has been investigated to understand the physicochemical process involved and to explore the possible use of nanoparticles in the treatment and management of textile waste matter. The dye removal capacity of ZNP towards Basic Red 12, Acid Orange 7 and Acid Blue 1 was found to be 15.64, 6.78 and 6.38 mg g^?1, respectively. The adsorption process was pH dependent and optimum pH values of 9.0, 2.0 and 4.0 were obtained for Basic Red 12, Acid Orange 7 and Acid Blue 1, respectively. Equilibrium was established after 1.0 h for all dyes. Langmuir, Freundlich and Temkin isotherm models were applied to the system. The adsorbent ZNP was characterised using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) and Fourier transform infrared (FTIR) techniques. SEM analysis revealed the noticeable nanoporous morphology of the material. The results of FTIR spectroscopy showed that the process is driven by an electrostatic complexation mechanism. XRD studies revealed the nanocrystalline structure of ZNP. BET surface area measurement suggested a high pore volume and large surface area for the adsorbent. The kinetic measurements suggested pseudo-second-order kinetic processes with high regression coefficients and smaller standard error of estimate values and lower residual sum of squares. The thermodynamic measurements suggested that all processes were exothermic and accompanied by negative values for Δ G⁰, Δ S⁰ and Δ H⁰.     

Toxicity of a rice field herbicide in a nitrogen fixing alga,Cylindrospermum sp

Supplementation of paraquat into the culture medium proved to be highly toxic for a blue-green alga Cylindrospermum sp. A concentration of 15 microg/ml proved algicidal for the test alga. Various concentrations (0.5 microg/ml - 15 microg/ml) of the herbicide affected the growth and reduced chlorophyll and phycocyanin contents of the alga. In addition, it inhibited differentiation of heterocysts and akinetes. The inhibition of algal growth was found to be partially relieved on addition of 500 microg/ml of glucose.     

Evaluation of the pesticidal potential of the congress grass,Parthenium hysterophorus Linn. on the mustard aphid,Lipaphis erysimi (Kalt.)

Petroleum ether extracts of leaves, stem and inflorescence of Parthenium hysterophorus Linn. at 500, 1000, 2000 and 5000 ppm concentrations were tested in the laboratory for their toxic effects on the mean life span and progeny production of adults of the mustard aphid, Lipaphis erysimi (Kalt.). The investigations revealed a significant decrease in life span and progeny production with treatment. Among the three plant parts tested for their efficacy, the leaf extract showed the most significant effect in causing a dose dependent decline in both the life span and progeny production.     

Removal of doxycycline hydrochloride from aqueous solution by rice husk ash using response surface methodology and disposability study

Environmental Science and Pollution Research - The huge demand and consumption of DOX, its incomplete metabolism, and complex behavior in atmosphere are causing a great ecological issue, which...     

Construction of multifunctional NH2-UiO-66 metal organic framework: sensing and photocatalytic degradation of ketorolac tromethamine and tetracycline in aqueous medium

Environmental Science and Pollution Research - Existence of pharmaceutical residues in water has endangered environmental pollution worldwide, which makes it ineludible to develop prospective...     

Toxicological impact of anilofos on some physiological processes of a rice field cyanobacterium Anabaena torulosa

This study deals with the toxicological impact of the herbicide anilofos on photosynthesis, respiration, nitrogen assimilation, and antioxidant system in a diazotrophic rice field cyanobacterium Anabaena torulosa. Treatment of anilofos (1.25, 2.5, and 5?mg?L^?1) affected growth, photosynthetic pigments, photosynthesis, and respiration of the cyanobacterium. Although all the photosynthetic pigments were affected, a maximum effect of the herbicide was observed on phycocyanin (51% reduction) followed by the carotenoids. The effect of the herbicide on photosynthetic pigments resulted in 57% decrease in photosynthetic O₂ evolution. Studies on the photochemical activity demonstrated that both photosystems (PS I and PS II) were affected by the herbicide. Decrease in the photosynthesis rate resulted in decreased nitrogen assimilation, as revealed by reduced nitrate (20%) and ammonium (26%) uptake and decreased activities of nitrogenase (63% decrease) and glutamine synthetase (22% decrease). This ultimately resulted in the reduced growth of the organism. Activities of superoxide dismutase, catalase, and peroxidase in the presence of anilofos increased by 1.8–3.5 times over control cultures. Proline content increased by 1.6 times, while the content of ascorbate decreased slightly. These results indicate that the organism was able to tolerate the herbicide stress by activating oxidative stress defense mechanism.     

Exigency for fusion of graphene and carbon nanotube with biomaterials

Biomaterial industry is a widely growing field that is closely related to advanced materials. With development in fabrication techniques new materials are being created by researchers daily. The currently used biomaterials for biomedical applications have some limitations. This review examines those limitations such as corrosion, short fatigue life, less wear resistance, and inadequate mechanical properties. These limitations may lead to adverse effects. To overcome these limitations carbon-based nanomaterials may be incorporated such that these biomaterials reach the level of ideal biomaterials. Upgrade of biomaterials with graphene and carbon nanotubes (CNTs) needs to be done only after checking the safety profile of these materials. Biocompatibility of functionalized graphene and CNT is found to be adequate for the use in many applications such as drug delivery, biosensing and imaging, cancer therapeutics, and tissue regeneration whereas pristine graphene and CNT may produce adverse effects. The potential of carbon-based nanomaterials and graphene (and its derivatives) in overcoming those limitations and enhancing biological activities of ongoing biomaterials by acting as composites and coating material is examined. In addition, nanomaterials employ new techniques in biomedical application such as cancer therapy for more efficient results.