Enhanced removal of heavy metals in primary treatment using coagulation and flocculation.

The goal of this study was to determine the removal efficiencies of chromium, copper, lead, nickel, and zinc from raw wastewater by chemically enhanced primary treatment (CEPT) and to attain a total suspended solids removal goal of 80%. Operating parameters and chemical doses were optimized by bench-scale tests. Locally obtained raw wastewater samples were spiked with heavy metal solutions to obtain representative concentrations of metals in wastewater. Jar tests were conducted to compare the metals removal efficiencies of the chemical treatment options using ferric chloride, alum, and anionic polymer. The results obtained were compared with those from other studies. It was concluded that CEPT using ferric chloride and anionic polymer is more effective than CEPT using alum for metals removal. The CEPT dosing of 40 mg/L ferric chloride and 0.5 mg/L polymer enhanced heavy metals removal efficiencies by over 200% for chromium, copper, zinc, and nickel and 475% for lead, compared with traditional primary treatment. Efficient metals capture during CEPT can result in increased allowable headworks loadings or lower metal levels in the outfall.     

Feasibility study of a soil-based rubberized CLSM

The development of beneficial uses of recycled scrap tires is always in great demand around the world. The disposal of on-site surplus excavated soil and the production of standard engineering aggregates have also been facing increasing environmental and ecological challenges in congested islands, such as Taiwan. This paper presents an experimental study using recycled crumb rubber and native silty sand to produce a lightweight, soil-based, rubberized controlled low strength material (CLSM) for a bridge approach repair. To assess the technical feasibility of this material, the effects of weight ratios of cement-to-water (C/W) and water-to-solid (W/S), and of rubber content on the engineering properties for different mixtures were investigated. The presented test results include flowability, unit weight, strength, settlement potential, and bearing capacity. Based on the findings, we conclude that a soil-based rubberized CLSM with 40% sand by weight and an optimal design ratio of 0.7 for C/W and 0.35 for W/S can be used for the proposed bridge approach repair. Such a mixture has demonstrated acceptable flowability, strength, and bearing capacity. Its lower unit weight, negligible compressibility, and hydrocollapse potential also help ensure that detrimental settlement is unlikely to occur. The results illustrate a novel scheme of CLSM production, and suggest a beneficial alternative for the reduction of scrap tires as well as conservation of resources and environment.     

Zonal management of arsenic contaminated ground water in Northwestern Bangladesh

This paper used ordinary kriging to spatially map arsenic contamination in shallow aquifers of Northwestern Bangladesh (total area  35,000 km²). The Northwestern region was selected because it represents a relatively safer source of large-scale and affordable water supply for the rest of Bangladesh currently faced with extensive arsenic contamination in drinking water (such as the Southern regions). Hence, the work appropriately explored sustainability issues by building upon a previously published study (Hossain et al., 2007; Water Resources Management, vol. 21: 1245–1261) where a more general nation-wide assessment afforded by kriging was identified. The arsenic database for reference comprised the nation-wide survey (of 3534 drinking wells) completed in 1999 by the British Geological Survey (BGS) in collaboration with the Department of Public Health Engineering (DPHE) of Bangladesh. Randomly sampled networks of zones from this reference database were used to develop an empirical variogram and develop maps of zonal arsenic concentration for the Northwestern region. The remaining non-sampled zones from the reference database were used to assess the accuracy of the kriged maps. Two additional criteria were explored: (1) the ability of geostatistical interpolators such as kriging to extrapolate information on spatial structure of arsenic contamination beyond small-scale exploratory domains; (2) the impact of a priori knowledge of anisotropic variability on the effectiveness of geostatistically based management. On the average, the kriging method was found to have a 90% probability of successful prediction of safe zones according to the WHO safe limit of 10 ppb while for the Bangladesh safe limit of 50 ppb, the safe zone prediction probability was 97%. Compared to the previous study by Hossain et al. (2007) over the rest of the contaminated country side, the probability of successful detection of safe zones in the Northwest is observed to be about 25% higher. An a priori knowledge of anisotropy was found to have inconclusive impact on the effectiveness of kriging. It was, however, hypothesized that a preferential sampling strategy that honored anisotropy could be necessary to reach a more definitive conclusion in regards to this issue.     

Genetic Diversity and Tests of the Hybrid Origin of the Endangered Yellow Larkspur

Abstract: Delphinium luteum ( Ranunculaceae), an endangered larkspur, is restricted to two wild populations near Bodega Bay, California. The total number of individuals in these two populations is estimated to be <100. We used allozyme and random amplified polymorphic DNA ( RAPD) markers to (1) assess levels and patterns of genetic diversity in one wild population and two cultivated populations and (2) test the hypothesis that D. luteum is of hybrid origin between D. decorum and D. nudicaule . These data will be used to aid in developing a management plan to conserve the species. The wild population maintains high levels of genetic diversity. Genetic data indicate that both cultivated populations, especially the north Sonoma population, have several allozymes and RAPD markers not found in the wild population and could be used to establish new populations of D. luteum or to enhance the diversity and size of the wild population. The allozyme data did not reveal any fixed differences between D. decorum and D. nudicaule , although allele frequencies of the putative parental populations differed. At these loci, D. luteum resembled D. nudicaule more than D. decorum  . Many unique RAPD markers distinguish each of the three species. The diagnostic markers from populations of D. nudicaule and D. decorum were not additive in the putative hybrid, and these data indicate that D. luteum is not of recent hybrid origin. Conservation of the yellow larkspur should include strategies that use the cultivated populations of D. luteum , but hybridizing D. decorum and D. nudicaule to "recreate" D. luteum is not recommended.     

The use of tree-rings and foliage as an archive of volcanogenic cation deposition

Tree cores (Pinus nigra ssp. laricio) and leaves (Castanea sativa) from the flanks of Mount Etna, Sicily were analysed by ICP-MS to investigate whether volcanogenic cations within plant material provide an archive of a volcano's temporal and spatial depositional influence. There is significant compositional variability both within and between trees, but no systematic dendrochemical correlation with periods of effusive, explosive or increased degassing activity. Dendrochemistry does not provide a record of persistent but fluctuating volcanic activity. Foliar levels of bioaccumulated cations correspond to modelled plume transport patterns, and map short-term volcanic fumigation. Around the flanks of the volcano foliar variation is greater for volatile cations (Cs, Cd, Pb) than for lithophilic cations (Ba, Sr), consistent with trace-metal supply from volcanic aerosol during quiescent periods.     

Bioaccumulation of trace elements in omnivorous amphibian larvae: implications for amphibian health and contaminant transport

Despite the influence that amphibians have on the flow of energy and nutrients in ecological systems, the role that amphibians play in transporting contaminants through food webs has received very little attention. This study was undertaken to investigate bioaccumulation of trace elements in amphibians relative to other small aquatic organisms in a contaminated wetland. We collected bullfrog larvae (Rana catesbeiana) along with three other species of small vertebrates and four species of invertebrates from a site contaminated with a wide array of trace elements and analyzed them for trace element concentrations and stable nitrogen and carbon isotope composition. We found that amphibian larvae accumulated the highest concentrations of most trace elements, possibly due to their feeding ecology. These results suggest that omnivorous amphibian larvae can serve as a critical link for trace element trophic transfer. Their propensity to accumulate trace elements may have important implications for amphibian health in contaminated environments and should be further investigated.     

Differences in p,p'-DDE bioaccumulation from compost and soil by the plants Cucurbita pepo and Cucurbita maxima and the earthworms Eisenia fetida and Lumbricus terrestris

Two plant species, Cucurbita pepo and Cucurbita maxima, and two earthworm species, Eisenia fetida and Lumbricus terrestris, were exposed to soil and compost with equivalent p,p'-DDE contamination. Pollutant bioconcentration was equal in plant roots in both media, but translocation was higher in C. pepo. Bioaccumulation by E. fetida was approximately 6- and 3-fold higher than that by L. terrestris in the soil and compost, respectively. For all species, p,p'-DDE uptake was significantly greater from soil than from compost; 7- to 8-fold higher for plant roots and 3- to 7-fold higher for worms. Abiotic desorption from soil was approximately twice that from the compost. When all the data are normalized for organic-carbon content of the media, the contaminant is more tightly bound by soil than compost. Although the risk associated with p,p'-DDE is higher in soil than compost, important mechanistic differences exist in contaminant binding to organic carbon in the two media.     

Meter-scale variation within a single transect demands attention to taxon accumulation curves in riverine microbiome studies

● Riverine microbiomes exhibited hyperlocal variation within a single transect. ● Certain family-level taxa directionally associated with river center and bank. ● Taxon accumulation curves within a transect urges more nuanced sampling design. Microbial communities inhabiting river ecosystems play crucial roles in global biogeochemical cycling and pollution attenuation. Spatial variations in local microbial assemblages are important for detailed understanding of community assembly and developing robust biodiversity sampling strategies. Here, we intensely analyzed twenty water samples collected from a one-meter spaced transect from the near-shore to the near-center in the Meramec River in eastern Missouri, USA and examined the microbial community composition with 16S rRNA gene amplicon sequencing. Riverine microbiomes across the transect exhibited extremely high similarity, with Pearson’s correlation coefficients above 0.9 for all pairwise community composition comparisons. However, despite the high similarity, PERMANOVA revealed significant spatial differences between near-shore and near-center communities (p = 0.001). Sloan’s neutral model simulations revealed that within-transect community composition variation was largely explained by demographic stochasticity (R² = 0.89). Despite being primarily explained by neutral processes, LefSe analyses also revealed taxa from ten families of which relative abundances differed directionally from the bank to the river center, indicating an additional role of environmental filtering. Notably, the local variations within a river transect can have profound impacts on the documentation of alpha diversity. Taxon-accumulation curves indicated that even twenty samples did not fully saturate the sampling effort at the genus level, yet four, six and seven samples were able to capture 80% of the phylum-level, family-level, and genus-level diversity, respectively. This study for the first time reveals hyperlocal variations in riverine microbiomes and their assembly mechanisms, demanding attention to more robust sampling strategies for documenting microbial diversity in riverine systems.     

Conserving alpha and beta diversity in wood-production landscapes

International demand for wood and other forest products continues to grow rapidly, and uncertainties remain about how animal communities will respond to intensifying resource extraction associated with woody bioenergy production. We examined changes in alpha and beta diversity of bats, bees, birds, and reptiles across wood production landscapes in the southeastern United States, a biodiversity hotspot that is one of the principal sources of woody biomass globally. We sampled across a spatial gradient of paired forest land-uses (representing pre and postharvest) that allowed us to evaluate biological community changes resulting from several types of biomass harvest. Short-rotation practices and residue removal following clearcuts were associated with reduced alpha diversity (−14.1 and −13.9 species, respectively) and lower beta diversity (i.e., Jaccard dissimilarity) between land-use pairs (0.46 and 0.50, respectively), whereas midrotation thinning increased alpha (+3.5 species) and beta diversity (0.59). Over the course of a stand rotation in a single location, biomass harvesting generally led to less biodiversity. Cross-taxa responses to resource extraction were poorly predicted by alpha diversity: correlations in responses between taxonomic groups were highly variable (−0.2 to 0.4) with large uncertainties. In contrast, beta diversity patterns were highly consistent and predictable across taxa, where correlations in responses between taxonomic groups were all positive (0.05–0.4) with more narrow uncertainties. Beta diversity may, therefore, be a more reliable and information-rich indicator than alpha diversity in understanding animal community response to landscape change. Patterns in beta diversity were primarily driven by turnover instead of species loss or gain, indicating that wood extraction generates habitats that support different biological communities.