Ecological planning for land use and ruraldevelopment of Taojiang County

ＥｃｏｌｏｇｉｃａｌｐｌａｎｎｉｎｇｆｏｒｌａｎｄｕｓｅａｎｄｒｕｒａｌｄｅｖｅｌｏｐｍｅｎｔｏｆＴａｏｊｉａｎｇＣｏｕｎｔｙＯｕｙａｎｇＺｈｉｙｕｎ；ＷａｎｇＲｕｓｏｎｇ；ＪａｓｏｎＷｅｉｓｍａｎ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－Ｅｎｖｉ...     

Optimizing carbon sequestration in commercial forests by integrating carbon management objectives in wood supply modeling

This paper provides a methodology for generating forest management plans, which explicitly maximize carbon (C) sequestration at the forest-landscape level. This paper takes advantage of concepts first presented in a paper by Meng et al. (2003; Mitigation Adaptation Strategies Global Change 8:371–403) by integrating C-sequestration objective functions in existing wood supply models. Carbon-stock calculations performed in Woodstock^TM (RemSoft Inc.) are based on C yields generated from volume table data obtained from local Forest Development Survey plots and a series of wood volume-to-C content conversion factors specified in von Mirbach (2000). The approach is used to investigate the impact of three demonstration forest-management scenarios on the C budget in a 110,000 ha forest in south-central New Brunswick, Canada. Explicit demonstration scenarios addressed include (1) maximizing timber extraction either by clearcut or selection harvesting for greatest revenue generation, (2) maximizing total C storage in the forest landscape and in wood products generated from harvesting, and (3) maximizing C storage together with revenue generation. The level of clearcut harvesting was greatest for scenario 1 (≥15 × 10⁴ m³ of wood and ≥943 ha of land per harvesting period), and least for scenario 2 (=0 m³ per harvesting period) where selection harvesting dominated. Because softwood saw logs were worth more than pulpwood ($60 m⁻³ vs. $40 m⁻³) and were strategic to the long-term storage of C, the production of softwood saw logs exceeded the production of pulpwood in all scenarios. Selection harvesting was generally the preferred harvesting method across scenarios. Only in scenario 1 did levels of clearcut harvesting occasionally exceed those of selection harvesting, mainly in the removal of old, dilapidated stands early in the simulation (i.e., during periods 1 through 3). Scenario 2 provided the greatest total C-storage increase over 80 years (i.e., 14 × 10⁶ Mg C, or roughly 264 Mg ha⁻¹) at a cost of $111 per Mg C due to lost revenues. Scenarios 3 and 1 produced reduced storage rates of roughly 9 × 10⁶ Mg C and 3 × 10⁶ Mg C, respectively; about 64% and 22% of the total, 80-year C storage calculated in scenario 2. The bulk of the C in scenario 2 was stored in the forest, amounting to about 76% of the total C sequestered.     

Metal removal studied by a laboratory scale immobilized microalgal reactor

１ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｄｕｓｔｒｉａｌｗａｓｔｅｗａｔｅｒｓ，ｐａｒｔｉｃｕｌａｒｌｙｔｈｏｓｅｄｉｓｃｈａｒｇｅｄｆｒｏｍｍａｎｕｆａｃｔｕｒｉｎｇｏｆｐｒｉｎｔｅｄｃｉｒｃｕｉｔｂｏａｒｄ（ＰＣＢ）ａｎｄｅｌｅｃｔｒｏｐｌａｔｉｎｇｃｏｎ...     

Impact of Gold mining on the Environment and Human Health: A Case Study in the Migori Gold Belt, Kenya

The study of gold sites in the Migori Gold Belt, Kenya, revealed that the concentrations of heavy metals, mainly Hg, Pb and As are above acceptable levels. Tailings at the panning sites recorded values of 6.5–510 mg kg^–1 Pb, 0.06–76.0 mg kg^–1 As and 0.46–1920 mg kg^–1 Hg. Stream sediments had values of 3.0–11075 mg kg^–1 Pb, 0.014–1.87 mg kg^–1 As and 0.28–348 mg kg^–1 Hg. The highest metal contamination was recorded in sediments from the Macalder stream (11075 mg kg^–1 Pb), Nairobi mine tailings (76.0 mg kg^–1 As) and Mickey tailings (1920 mg kg^–1 Hg). Mercury has a long residence time in the environment and this makes its emissions from artisan mining a threat to health. Inhaling large amounts of siliceous dust, careless handling of mercury during gold panning and Au/Hg amalgam processing, existence of water logged pits and trenches; and large number of miners sharing poor quality air in the mines are the major causes of health hazards among miners. The amount of mercury used by miners for gold amalgamation during peak mining periods varies from 150 to 200 kg per month. Out of this, about 40% are lost during panning and 60% lost during heating Au/Hg amalgam. The use of pressure burners to weaken the reef is a deadly mining procedure as hot particles of Pb, As and other sulphide minerals burn the body. Burns become septic. This, apparently, leads to death within 2–3 years. On-site training of miners on safe mining practices met with enthusiasm and acceptance. The use of dust masks, air filters and heavy chemical gloves during mining and mineral processing were readily accepted. Miners were thus advised to purchase such protective gear, and to continue using them for the sake of their health. The miners' workshop, which was held at the end of the project is likely to bear fruit. The Migori District Commissioner and other Government officials, including medical officers attended this workshop. As a result of this, the Government is seriously considering setting up a clinic at Masara, which is one of the mining centres in the district. This would improve the health of the mining community.     

Chinook salmon use of spawning patches: relative roles of habitat quality, size, and connectivity.

Declines in many native fish populations have led to reassessments of management goals and shifted priorities from consumptive uses to species preservation. As management has shifted, relevant environmental characteristics have evolved from traditional metrics that described local habitat quality to characterizations of habitat size and connectivity. Despite the implications this shift has for how habitats may be prioritized for conservation, it has been rare to assess the relative importance of these habitat components. We used an information-theoretic approach to select the best models from sets of logistic regressions that linked habitat quality, size, and connectivity to the occurrence of chinook salmon (Oncorhynchus tshawytscha) nests. Spawning distributions were censused annually from 1995 to 2004, and data were complemented with field measurements that described habitat quality in 43 suitable spawning patches across a stream network that drained 1150 km2 in central Idaho. Results indicated that the most plausible models were dominated by measures of habitat size and connectivity, whereas habitat quality was of minor importance. Connectivity was the strongest predictor of nest occurrence, but connectivity interacted with habitat size, which became relatively more important when populations were reduced. Comparison of observed nest distributions to null model predictions confirmed that the habitat size association was driven by a biological mechanism when populations were small, but this association may have been an area-related sampling artifact at higher abundances. The implications for habitat management are that the size and connectivity of existing habitat networks should be maintained whenever possible. In situations where habitat restoration is occurring, expansion of existing areas or creation of new habitats in key areas that increase connectivity may be beneficial. Information about habitat size and connectivity also could be used to strategically prioritize areas for improvement of local habitat quality, with areas not meeting minimum thresholds being deemed inappropriate for pursuit of restoration activities.     

Temporal variability in winter travel patterns of Yellowstone bison: the effects of road grooming.

The influence of winter recreation on wildlife in Yellowstone National Park (YNP), Wyoming and Montana, USA, is a controversial issue. In particular, the effects of road grooming, done to facilitate snowmobile and snowcoach travel, on bison (Bison bison) ecology are under debate. We collected data during winters, from 1997 to 2005, on bison road use, off-road travel, and activity budgets to quantify temporal trends in the amount of bison road and off-road travel and to identify the ecological factors affecting bison movements and use of the groomed road system in the Madison-Gibbon-Firehole (MGF) area of YNP. Using model comparison techniques, we found bison travel patterns to be influenced by multiple, interacting effects. Road travel was negatively correlated with road grooming, and we found no evidence that bison preferentially used groomed roads during winter. Snow water equivalent, bison density, and the springtime melt period were positively correlated with both bison road and off-road travel. From behavioral scans on 68,791 bison, we found that travel is only a small percentage (11%) of all bison activity, with foraging comprising 67% of observations. Also, only 7% of traveling bison and 30% of foraging bison were displacing snow, and we suggest foraging, rather than traveling, is likely the major energetic cost to bison in winter. Bison utilize their own trail network, connecting foraging areas using stream corridors, geothermal pathways, and self-groomed travel routes. Our results indicate that temporal patterns in bison road travel are a manifestation of general travel behavior and that groomed roads in the MGF do not appear to be a major factor influencing bison ecology and spatial redistribution. We suggest that the changes in bison spatial dynamics during the past three decades have likely been the result of the natural phenomenon of density-dependent range expansion, rather than having been caused by the anthropogenic influence of road grooming.     

A survey of drinking water supplies in the Province of Ontario for dioxins and furans

A survey of drinking water supplies in the Province of Ontario was initiated in 1983 to determine the extent of their contamination by polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). This drinking water survey arose from concerns regarding the discovery of PCDDs and PCDFs in sport fish from western Lake Ontario in the early 1980's.A total of 49 water supplies throughout all Regions of Ontario have been examined to date. Water supplies in the vicinity of chemical industries and pulp and paper mills were sampled more frequently; as many as 20 times. Detection limits were in the low parts per quadrillion (ppq) range for all tetra- to octachlorinated PCDDs and PCDFs.As of February 1989, 4, 347 results were received for 399 raw and treated water samples. Only 37 positive results were reported, constituting less than 1 percent of the total number of results. The O₈CDD congener accounted for 36 of the 37 positive results. The 2,3,7,8- TCDD isomer was not detected in any sample.     

Accumulation of trinitrotoluene (TNT) in aquatic organisms: part 1--Bioconcentration and distribution in channel catfish (Ictalurus punctatus)

Little is currently known regarding the toxicokinetics of TNT in fish. In the present study, the bioconcentration and distribution of trinitrotoluene (TNT) and TNT biotransformation products was investigated in juvenile channel catfish by exposing catfish to 14C-labeled TNT in water. Uptake experiments showed relatively fast rates (k(u)=10.1 ml g(-1) h(-1)) for TNT from the water; however, bioconcentration factors for TNT were low (0.79 ml g(-1)) due to rapid biotransformation and potential elimination of TNT. Accumulation of extractable radioactivity (TNT and all extractable biotransformation products) was much greater (BCF=10.5 ml g(-1)) than that for parent compound. TNT (parent compound) bioconcentrated to the greatest extent in the gills of the fish, while total radioactivity bioconcentrated to the greatest extent in the viscera. Residual portions of the fish that contained muscle and skin had lower concentrations of TNT than the whole fish, indicating that ingestion of fish fillets would result in decreased exposure to human consumers. Although the bioconcentration potential of TNT is very low, future research needs to be conducted to identify the biotransformation products that make up most of the radioactivity in exposed fish and evaluate their potential to promote toxicity.     

Biodegradation capacity of tributyltin by two Chlorella species

Two microalgal species, Chlorella vulgaris and Chlorella sp., which showed high tributyltin (TBT) tolerant ability were investigated for their capabilities in degrading TBT at sublethal concentration. The distribution of TBT and its degraded products dibutyltin (DBT) and monobutyltin (MBT) in the incubation medium, extracellular surface and intracellular fraction were monitored during an exposure period of 14 days. Results showed that biosorption of TBT by the algal cell wall was the major mechanism in reducing 40% of the initial TBT from the medium in the first 2 days. The half-life of TBT incubated with C. vulgaris was 60 h while that of Chlorella sp. was 80 h. The occurrence of DBT at Day 1 in the culture medium provided direct evidence to the biodegradation of TBT by both Chlorella species. At the end of the experimental period, 27 and 41% of the original TBT were recovered as DBT and MBT in cultures of C. vulgaris, respectively. In contrast, DBT appeared to be the only degradation product of Chlorella sp. and only 26% of the original TBT was transformed to DBT. Despite the same genus, TBT was debutylated to a greater extent to MBT by C. vulgaris, while DBT was the end degradation product by Chlorella sp. The capability of such debutylating process therefore accounted for the higher tolerant ability of C. vulgaris than Chlorella sp.