Neighborhood density and travel mode: new survey findings for high densities

At high densities, land uses get close enough to each other to support walk, bike, and transit modes above 60% of total trips. The San Francisco Bay Area census was used to define five density levels: rural, exurban, suburban, central city, and urban core. The urban core definition, over 50 persons per neighborhood acre, is much denser than in other research. The California Household Transportation Survey supplied new data on block group area, population, trip stages, trip distances, trip time, and travel mode by density. The National Household Transportation Survey supplied block group population, density, travel mode, and income data. Both sources show a strong nonlinear relationship going from rural to urban core: auto miles and trips decrease as walk and transit miles and trips increase. With density, people travel fewer miles and spend less time traveling. High-income households in dense areas travel far fewer miles than those living at higher densities. With sufficient density, complementary features play a role in furthering mode shift. For planning purposes, the need for parking greatly declines. The findings are a basis for similar research elsewhere on high densities and complementary features.     

领先的美国各州:创造性的清洁能源财政

近些日子,根据象征意义的政治曲线观看美国各州非常普遍:"红色"代表共和党,"蓝色"代表民主党.看看这份当前的政治图景,毫不令人惊讶,对美国有关气候变化和可更新政策的盛行感觉是,它们都属于无行动之列.     

Devising an integrated methodology for analyzing energy use and CO2 emissions from Taiwan's petrochemical industries

Input-output modeling and multiplier analysis are used to assess Taiwan's five petrochemical industries, based upon their economic contribution and potential impacts on energy consumption and CO2 emission. In addition, a consolidated index system was developed for evaluating energy and economic efficiencies as well as targets for CO2 reduction. Results indicate that petrochemical materials (PM) make a major contribution to economic development, with lesser contributions from plastic materials (PL) and artificial fibres (AF). PM has the highest energy multiplier while PL has the largest induced potential for energy consumption. Plastic and rubber products (PP, RP) are relatively insignificant energy consumers. AF has the highest CO2 multiplier, and its induced potential for CO2 emission is the most significant. The consolidated index shows that the upstream petrochemical industries perform rather poorly in an integrated view of economic, energy, and CO2 emission, and should be seen as the primary targets for CO2 reduction. Investment of the petrochemical industries in Taiwan should be adjusted to improve energy efficiency, economic bases, and lower CO2 emissions.     

A Kinetic Study of Aerobic Propane Uptake and Cometabolic Degradation of Chloroform, cis-Dichloroethylene and Trichloroetylene in Microcosms with Groundwater/Aquifer Solids

The focus of this study was to compare the behavior of different consortiums of aerobic propane-utilizing microorganisms, with respect to both the lag time for growth after exposure to propane, and their ability to transform three chlorinated aliphatic hydrocarbons (CAHs): chloroform (CF), cis-dichloroethylene (c-DCE) and trichloroethylene (TCE). Thirty-three slurry microcosms, representing seven combinations of aquifer solids and groundwater were constructed for this study. The lag time required for establishing propane-utilizing consortiums ranged between 24 and 29 days in 6 of the 7 combinations. Kinetic tests were performed with respect to propane utilization and CAH transformation. After CAH exposure, the ability of the microorganisms to metabolize propane was significantly reduced. CF and TCE were transformed more slowly than c-DCE, the average values of the initial transformation rates being equal to 0.10 ± 0.04, 0.09 ± 0.05 and 0.98 ± 0.18 mol/(L h),respectively. CF caused the greatest reduction in propane uptake rates, whereas c-DCE exhibited an apparently reversible negative effect on propane uptake rates. The estimates of the Monod half-saturation constants relative to CF, TCE and c-DCE resulted in the 2–3 mol/L range, but were characterized by a high degree of uncertainty.     

Copper complexation by dissolved organic matter and uncertainty assessment of their stability constants

The interaction of Cu with dissolved organic matter (DOM, extracted from an organic forest floor) was investigated and the resulting data was evaluated in terms of their uncertainty. The speciation of Cu over ‘free’ Cu (as analysed by diffusive gradients in thin films (DGT)), dissolved Cu–DOM complexes and precipitated Cu–DOM was determined as a function of pH (3.5, 4.0 and 4.5) and Cu/C ratio. The dissolved organically bound fraction was highest at pH 4.5, but this fraction decreased with increasing Cu/C ratio, which was observed for all pH levels. In the range of Cu/C=7×10⁻⁵–2.3×10⁻² (mol/mol) the precipitated fraction was very small. The speciation of both Al and Fe was not affected by increasing Cu concentrations. From a continuous distribution model using the Scatchard approach, we calculated the optimal fit and corresponding upper and lower 95% uncertainty bounds of the overall stability constants (K_o) with the shuffled complex evolution Metropolis (SCEM) algorithm. Although the optimal equation fitted the data very well, the uncertainty of the, according to literature, most reliable approach to establish stability constants, was still large. Accordingly, the usually reported intrinsic stability constants exhibited large uncertainty ranging from logK_i=6.0–7.1 (optimal 6.7) for pH 3.5, logK_i=6.5–7.1 (optimal 6.8) for pH 4.0, and logK_i=6.4–7.2 (optimal 6.8) for pH 4.5 and showed only little effect of pH.     

A study of radon levels in NHS premises in affected areas around the UK

Radon gas contributes a significant fraction of the natural background radiation dose, and in some areas raised levels are found in buildings. both homes and the workplace. Different UK Action Levels apply to homes and the workplace. because of the diurnal variation of radon. This study reviews the results for a number of hospitals throughout England and Wales. and suggests that the likelihood of finding raised radon levels is similar in the workplace and homes in the same area. Radon measurements and consequent remediation of any raised levels are appropriate in all workplaces in radon Affected Areas with over 5% of houses above the UK domestic Action Level of 200 Bq m(-3).     

An evaluation of benthic macroinvertebrate biomass methodology

Evaluation of analytical methods employed for wet weight (live or preserved samples) of benthic macroinvertebrates reveals that centrifugation at 140 x gravity for one minute yields constant biomass estimates. Less relative centrifugal force increases chance of incomplete removal of body moisture and results in weighing error, while greater force may rupture fragile macroinvertebrates, such as mayflies. Duration of specimen exposure in ethanol, formalin, and formol (formaling-ethanol combinations) causes significant body weight loss with within 48 hr formalin and formol cause less body weight loss than ethanol. However, as all preservatives tested cause body weight loss, preservation time of samples collected for comparative purposes should be treated uniformly. Dry weight estimates of macroinvertebrates are not significantly affected by kind of preservative or duration of exposure. Constant dry weights are attained by oven drying at 103 °C at a minimum of four hours or vacuum oven drying (15 inches of mercury pressure) at 103 °C for a minimum of one hour. Although requiring more time in preparation than oven drying and inalterably changing specimen body shape, freeze drying (10 microns pressure, -55 °C, 24 hr) provides constant dry weights and is advantageous for long term sample storage by minimizing curatorial attention. Constant ash-free dry weights of macroinvertebrate samples are attained by igniting samples at 500–550 °C for a minimum of one hour with slow cooling to room temperature in desiccators before weighing.     

Disturbance and recovery of large floodplain rivers

Disturbance in a river-floodplain system is defined as an unpredictable event that disrupts structure or function at the ecosystem, community, or population level. Disturbance can result in species replacements or losses, or shifts of ecosystems from one persistent condition to another. A disturbance can be a discrete event or a graded change in a controlling factor that eventually exceeds a critical threshold. The annual flood is the major driving variable that facilitates lateral exchanges of nutrients, organic matter, and organisms. The annual flood is not normally considered a disturbance unless its timing or magnitude is “atypical.” The record flood of 1973 had little effect on the biota at a long-term study site on the Mississippi River, but the absence of a flood during the 1976–1977 Midwestern drought caused short- and long-term changes. Body burdens of contaminants increased temporarily in key species, because of increased concentration resulting from reduced dilution. Reduced runoff and sediment input improved light penetration and increased the depth at which aquatic macrophytes could grow. Developing plant beds exerted a high degree of biotic control and were able to persist, despite the resumption of normal floods and turbidity in subsequent years. In contrast to the discrete event that disturbed the Mississippi River, a major confluent, the Illinois River, has been degraded by a gradual increase in sediment input and sediment resuspension. From 1958 to 1961 formerly productive backwaters and lakes along a 320-km reach of the Illinois River changed from clear, vegetated areas to turbid, barren basins. The change to a system largely controlled by abiotic factors was rapid and the degraded condition persists. Traditional approaches to experimental design are poorly suited for detecting control mechanisms and for determining the critical thresholds in large river-floodplains. Large river-floodplain systems cannot be manipulated or sampled as easily as small streams, and greater use should be made of man-made or natural disturbances and environmental restoration as opportunistic experiments to measure thresholds and monitor the recovery process. Coauthors are listed in alphabetical order.