Acquisition and loss of cold-tolerance in adult barnacles (Balanus balanoides) kept under laboratory conditions

In the laboratory, Balanus balanoides (L.) barnacles maintained without food at 5°C over the winter to summer period remained cold-tolerant. Winter animals maintained at 5°C and fed Artemia nauplii under a controlled light-dark regime until mid-summer lost this cold-tolerance. Summer animals, maintained without food at 5° or 15°C until midwinter, became cold-tolerant. Summer and winter animals subjected to increased (or decreased) ambient salinity for 48 h showed a small decrease (or increase) in their lower median lethal temperature (MLT—defined as the temperature at which 50% of the animals die after 18 h exposure to air). Summer animals subjected to desiccation for 48 h also showed a small decrease in their lower MLT. It is concluded that the seasonal changes in cold-tolerance of adult barnacles are probably induced by a combination of environmental factors including food availability, light intensity, day-length and changes in ambient sea-water temperatures. Development of cold-tolerance in the winter did not depend upon fertilisation. Changes in intra-cellular solute concentration which accompany adaptation to changes in ambient salinity or desiccation do not appear to be related to the seasonal changes in cold-tolerance.     

An evaluation of benthic macroinvertebrate biomass methodology

This study shows that biological assessments of water quality status using biomass estimates of wet, dry, and ash-free dry weights and counts of individual organisms from a small, headwater stream in southwestern Ohio provide essentially similar results concerning the impact of a sewage treatment plant discharge. Of the indices of biotic status for the stream segment employed for data evaluation; Diversity Index (D), Community Diversity Index (d), Trophic Condition Index (TCI), and Empirical Biotic Index (EBI), the latter two provided evaluations most consistent with benchmark water chemistry and physics information concerning the trophic status of the stream. In addition, the percent composition of macro-invertebrate taxa by pollutional category; clean water, facultative, and pollution tolerant, as ascribed using TCI and EBI ranges for individual taxa collected in combination of Ekman grab, rock-filled basket sampler and drift net samples, proves adequate for interpretation of biotic status.     

Measurements of C6-C8 hydrocarbons at a UK rural site during January 1999. Site evaluation and correlations between species

Ambient concentrations of C6-C8 aromatic hydrocarbons and n-heptane, determined by gas chromatography with flame ionisation detection, are presented from a winter campaign during January 1999 at a rural site near Leeds. Absolute concentrations are significantly lower than those obtained from the only designated UK rural site (Harwell) in the automated UK hydrocarbon network. Both absolute and relative concentrations of hydrocarbons measured at the site have been interpreted in terms of the arriving back-trajectories. The site is subject to two main airflows during the winter months; relatively polluted air from the southwest and much cleaner air from the northwest. Ratios of hydrocarbon concentrations show evidence of significant chemical processing consistent with chemical removal by OH. Uncertainties in the ages of the trajectories prevent a reliable estimation of the average OH concentration over the trajectory. The dependence of the variance of the hydrocarbon concentrations with their lifetime with respect to removal by OH does not show the expected behaviour.     

IMPLICATIONS OF CLIMATIC VARIABILITY FOR REGULATORY LOW FLOWS IN THE SOUTH PLATTE RIVER BASIN,COLORADO1

ABSTRACT: The maximum concentration of a regulated substance that is allowed in a wastewater effluent usually is determined from the amount of dilution provided by the receiving water. Dilution flow is estimated from historical data by application of statistical criteria that define low flow conditions for regulatory purposes. Such use of historical data implies that the past is a good indicator of future conditions, at least for the duration of a discharge permit. Short records, however, introduce great uncertainty in the estimation of low flows because they are unlikely to capture events with recurrence frequencies of multiple years (e.g., ENSO events or droughts). We conducted an analysis of daily flows at several gages with long records in the South Platte River basin of Colorado. Low flows were calculated for successive time blocks of data (3‐, 5‐, 10‐, and 20‐years), and these were compared with low flows calculated for the entire period of record (> 70 years). In unregulated streams, time blocks of three or five years produce estimates of low flows that are highly variable and consistently greater than estimates derived from a longer period of record. Estimates of low flow from 10‐year blocks, although more stable, differ from the long term estimates by as much as a factor of two because of climate variation. In addition, the hydrographs of most streams in Colorado have been influenced by dams, diversions, or water transfers. These alterations to the natural flow regime shorten the record that is useful for analysis, but also tend to increase the calculated low flows. The presence of an upward trend in low flows caused by water use represents an unanticipated risk because it fails to incorporate societal response to severe drought conditions. Thus, climate variability poses a significant risk for water quality both directly, because it may not be represented adequately in the short periods of the hydrologic record that are typically used in permits, and indirectly, through its potential to cause altered use of water during time of scarcity.     

Neighborhood density and travel mode: new survey findings for high densities

At high densities, land uses get close enough to each other to support walk, bike, and transit modes above 60% of total trips. The San Francisco Bay Area census was used to define five density levels: rural, exurban, suburban, central city, and urban core. The urban core definition, over 50 persons per neighborhood acre, is much denser than in other research. The California Household Transportation Survey supplied new data on block group area, population, trip stages, trip distances, trip time, and travel mode by density. The National Household Transportation Survey supplied block group population, density, travel mode, and income data. Both sources show a strong nonlinear relationship going from rural to urban core: auto miles and trips decrease as walk and transit miles and trips increase. With density, people travel fewer miles and spend less time traveling. High-income households in dense areas travel far fewer miles than those living at higher densities. With sufficient density, complementary features play a role in furthering mode shift. For planning purposes, the need for parking greatly declines. The findings are a basis for similar research elsewhere on high densities and complementary features.     

The effect of repeated vibration signals on worker behavior in established and newly founded colonies of the honey bee, <Emphasis Type="Italic">Apis mellifera</Emphasis>

Communication signals used in animal social interactions are frequently performed repetitively, but the function of this repetition is often not well understood. We examined the effects of signal repetition by investigating the behavior of worker honey bees that received differing numbers of vibration signals in established and newly founded colonies, which could use signal repetition differently to help adjust task allocations to the labor demands associated with the different stages of colony development. In both colony types, more than half of all monitored workers received more than one vibration signal, and approximately 12% received ≥5 signals during a given 20-min observation period. Vibrated recipients exhibited greater activity and task performance than same-age non-vibrated controls at all levels of signal activity. However, vibrated workers showed similar levels of task performance, movement rates, cell inspection rates, and trophallactic exchanges regardless of the number of signals received. Thus, the repeated performance of vibration signals on individual bees did not cause cumulative increases in the activity of certain workers, but rather may have functioned to maintain relatively constant levels of activity and task performance among groups of recipients. The established and newly founded colonies did not differ in the extent to which individual workers received the different numbers of vibration signals or in the levels of activity stimulated by repeated signals. Previous work has suggested that compared to established colonies, newly founded colonies have a greater number of vibrators that perform signals on a greater proportion of the workers they contact. Taken in concert, these results suggest that vibration signal repetition may help to adjust task allocations to the different stages of colony development by helping to maintain similar levels of activity among a greater total number of recipients, rather than by eliciting cumulative effects that cause certain recipients to work harder than others.     

Understanding consumer behaviour and adaptation planning responses to climate-driven environmental change in Canada's parks and protected areas: a climate futurescapes approach

Parks and protected areas are a global ecological, social and health resource visited by over 8 billion people annually. Their use can yield substantial benefits, but only if a balance between ecological integrity and sustainable visitation is struck. This research explores the potential influence of climate-driven environmental change on visitation to North America's most popular glacier, the Athabasca Glacier in Jasper National Park, Canada. Photorealistic environmental visualizations were used to gauge visitors’ perceptions of environmental change and potential impacts on consumer behaviour. Results suggest that impacts could substantially diminish the site's pull as a tourism destination. Rather than improving visitation prospects, expert-proposed adaptations underestimated the importance of perceived naturalness and contributed to further potential decline. Findings are relevant to protected areas planning and management. They suggest that a natural path to climate change adaptation is the best way to support both ecological integrity and the long-term tourism pull of protected areas.     

1990 Update of the U.S. Environmental Protection Agency’s SITE Emerging Technology Program

The Superfund Amendments and Reauthorization Act of 1986 (SARA) directed the U.S. Environmental Protection Agency (EPA) to establish an Alternative/Innovative Treatment Technology Research and Demonstration Program. The EPA’s Office of Solid Waste and Emergency Response and the Office of Research and Development established a program called the Superfund Innovative Technology Evaluation (SITE) Program to accelerate the development and use of innovative cleanup technologies at hazardous waste sites. The SITE Program comprises of five areas: the Demonstration Program, the Emerging Technology Program, the Measurement and Monitoring Technologies Development Program, the Innovative Technologies Program, and the Technology Transfer Program.

This paper discusses the Emerging Technology Program (ETP) that supports the development of technologies that have been successfully tested at bench-scale level. Before a technology can be accepted into the Emerging Technology Program, sufficient data must be available to validate its basic concepts. The ETP enters into a co-funding effort with developers for a one- or two-year effort. Developers are responsible for contributing financial support and conducting the developmental research. After development and data collection, the technology’s performance is documented and a report is prepared, which may include recommendations for further developing the technology. If test results are encouraging, a technology may proceed with approval to a field demonstration.

The purpose of this article is to provide the reader with (1) an introduction to the Emerging Technology Program (2) an understanding of how the program operates (3) a summary of those technologies currently being tested and evaluated under the program and (4) information on how to apply to the program.     

Speciated arsenic in air: measurement methodology and risk assessment considerations

Accurate measurement of arsenic (As) in air is critical to providing a more robust understanding of arsenic exposures and associated human health risks. Although there is extensive information available on total arsenic in air, less is known on the relative contribution of each arsenic species. To address this data gap, the authors conducted an in-depth review of available information on speciated arsenic in air. The evaluation included the type of species measured and the relative abundance, as well as an analysis of the limitations of current analytical methods. Despite inherent differences in the procedures, most techniques effectively separated arsenic species in the air samples. Common analytical techniques such as inductively coupled plasma mass spectrometry (ICP-MS) and/or hydride generation (HG)- or quartz furnace (GF)-atomic absorption spectrometry (AAS) were used for arsenic measurement in the extracts, and provided some of the most sensitive detection limits. The current analysis demonstrated that, despite limited comparability among studies due to differences in seasonal factors, study duration, sample collection methods, and analytical methods, research conducted to date is adequate to show that arsenic in air is mainly in the inorganic form. Reported average concentrations of As(III) and As(V) ranged up to 7.4 and 10.4 ng/m3, respectively, with As(V) being more prevalent than As(III) in most studies. Concentrations of the organic methylated arsenic compounds are negligible (in the pg/m3 range). However because of the variability in study methods and measurement methodology, the authors were unable to determine the variation in arsenic composition as a function of source or particulate matter (PM) fraction. In this work, the authors include the implications of arsenic speciation in air on potential exposure and risks. The authors conclude that it is important to synchronize sample collection, preparation, and analytical techniques in order to generate data more useful for arsenic inhalation risk assessment, and a more robust documentation of quality assurance/quality control (QA/QC) protocols is necessary to ensure accuracy, precision, representativeness, and comparability.