Removal of antibiotics from urban wastewater by constructed wetland optimization

Seven mesocosm-scale constructed wetlands (CWs), differing in their design characteristics, were set up in the open air to assess their efficiency to remove antibiotics from urban raw wastewater. A conventional wastewater treatment plant (WWTP) was simultaneously monitored. The experiment took place in autumn. An analytical methodology including HPLC-MS/MS was developed to measure antibiotic concentrations in the soluble water fraction, in the suspended solids fraction and in the WWTP sludge. Considering the soluble water fraction, the only easily eliminated antibiotics in the WWTP were doxycycline (61 ± 38%) and sulfamethoxazole (60 ± 26%). All the studied types of CWs were efficient for the removal of sulfamethoxazole (59 ± 30-87 ± 41%), as found in the WWTP, and, in addition, they removed trimethoprim (65 ± 21-96 ± 29%). The elimination of other antibiotics in CWs was limited by the specific system-configuration: amoxicillin (45 ± 15%) was only eliminated by a free-water (FW) subsurface flow (SSF) CW planted with Typha angustifolia; doxycycline was removed in FW systems planted with T. angustifolia (65 ± 34-75 ± 40%), in a Phragmites australis-floating macrophytes system (62 ± 31%) and in conventional horizontal SSF-systems (71 ± 39%); clarithromycin was partially eliminated by an unplanted FW-SSF system (50 ± 18%); erythromycin could only be removed by a P. australis-horizontal SSF system (64 ± 30%); and ampicillin was eliminated by a T. angustifolia-floating macrophytes system (29 ± 4%). Lincomycin was not removed by any of the systems (WWTP or CWs). The presence or absence of plants, the vegetal species (T. angustifolia or P. australis), the flow type and the CW design characteristics regulated the specific removal mechanisms. Therefore, CWs are not an overall solution to remove antibiotics from urban wastewater during cold seasons. However, more studies are needed to assess their ability in warmer periods and to determine the behaviour of full-scale systems.     

Kinetics of scrap tyre pyrolysis under vacuum conditions

Scrap tyre pyrolysis under vacuum is attractive because it allows easier product condensation and control of composition (gas, liquid and solid). With the aim of determining the effect of vacuum on the pyrolysis kinetics, a study has been carried out in thermobalance. Two data analysis methods have been used in the kinetic study: (i) the treatment of experimental data of weight loss and (ii) the deconvolution of DTG (differential thermogravimetry) curve. The former allows for distinguishing the pyrolysis of the three main components (volatile components, natural rubber and styrene–butadiene rubber) according to three successive steps. The latter method identifies the kinetics for the pyrolysis of individual components by means of DTG curve deconvolution. The effect of vacuum in the process is significant. The values of activation energy for the pyrolysis of individual components of easier devolatilization (volatiles and NR) are lower for pyrolysis under vacuum with a reduction of 12 K in the reaction starting temperature. The kinetic constant at 503 K for devolatilization of volatile additives at 0.25 atm is 1.7 times higher than that at 1 atm, and that corresponding to styrene–butadiene rubber at 723 K is 2.8 times higher. Vacuum enhances the volatilization and internal diffusion of products in the pyrolysis process, which contributes to attenuating the secondary reactions of the repolymerization and carbonization of these products on the surface of the char (carbon black). The higher quality of carbon black is interesting for process viability.The large-scale implementation of this process in continuous mode requires a comparison to be made between the economic advantages of using a vacuum and the energy costs, which will be lower when the technologies used for pyrolysis require a lower ratio between reactor volume and scrap tyre flow rate.     

Evaluation of the European population intake fractions for European and Finnish anthropogenic primary fine particulate matter emissions

The intake fraction (iF) has been defined as the integrated incremental intake of a pollutant released from a source category or region summed over all exposed individuals. In this study we evaluated the iFs in the population of Europe for emissions of anthropogenic primary fine particulate matter (PM_2.5) from sources in Europe, with a more detailed analysis of the iF from Finnish sources. Parameters for calculating the iFs include the emission strengths, the predicted atmospheric concentrations, European population data, and the average breathing rate per person. Emissions for the whole of Europe and Finland were based on the inventories of the European Monitoring and Evaluation Programme (EMEP) and the Finnish Regional Emission Scenario (FRES) model, respectively. The atmospheric dispersion of primary PM_2.5 was computed using the regional-scale dispersion model SILAM. The iFs from Finnish sources were also computed separately for six emission source categories. The iFs corresponding to the primary PM_2.5 emissions from the European countries for the whole population of Europe were generally highest for the densely populated Western European countries, second highest for the Eastern and Southern European countries, and lowest for the Northern European and Baltic countries. For the entire European population, the iF values varied from the lowest value of 0.31 per million for emissions from Cyprus, to the highest value of 4.42 per million for emissions from Belgium. These results depend on the regional distribution of the population and the prevailing long-term meteorological conditions. Regarding Finnish primary PM_2.5 emissions, the iF was highest for traffic emissions (0.68 per million) and lowest for major power plant emissions (0.50 per million). The results provide new information that can be used to find the most cost-efficient emission abatement strategies and policies.     

Understanding slums: analysis of the metabolic pattern of the Vidigal favela in Rio de Janeiro,Brazil

This paper illustrates an innovative approach to characterize the metabolic pattern of informal urban settlements or slums with the aim to better understand the factors that affect the material standard of living of slum residents, the dynamics of slum development and the interaction of the slum with its wider socioeconomic context. The proposed system of accounting, multi-scale integrated analysis of societal and ecosystem metabolism (MuSIASEM), integrates socioeconomic and spatial data and studies energy and monetary flows in relation to the pattern of human activities and land uses. The theoretical basis of the approach is illustrated with data from Vidigal favela in Rio de Janeiro, Brazil. In particular, we show how to construct taxonomies of accounting categories to characterize: (1) the set of activities carried out by the slum dwellers, to which to link assessments of flow rates per hour; (2) the set of land uses or spatial elements making up the slum, to which to link assessments of flow densities per hectare. The analysis of the interaction of Vidigal with its wider socioeconomic context focuses on monetary flows and transport (job commuting).     

Impacts of future land use/land cover on wildfire occurrence in the Madrid region (Spain)

This paper assesses the relative importance of socioeconomic factors linked to fire occurrence through the simulation of future land use/land cover (LULC) change scenarios in the Madrid region (Spain). This region is a clear example of the socioeconomic changes that have been occurring over recent decades in the European Mediterranean as well as their impact on LULC and fire occurrence. Using the LULC changes observed between 1990 and 2006 as a reference, future scenarios were run up to 2025 with the conversion of land use and its effects model. Simultaneously, the relationship between LULC arrangement (interfaces) and historical fire occurrence was calculated using logistic regression analysis and used to quantify changes in future fire occurrence due to projected changes in LULC interfaces. The results revealed that it is possible to explain the probability of fire occurrence using only variables obtained from LULC maps, although the explanatory power of the model is low. In this context, border areas between some LULC types are of particular interest (i.e., urban/forest, grassland/forest and agricultural/forest interfaces). Results indicated that expected LULC changes in Euro-Mediterranean regions, particularly given the foreseeable increase in the wildland–urban interface, will substantially increase fire occurrence (up to 155 %). This underlines the importance of future LULC scenarios when planning fire prevention measures.     

Understanding adaptive capacity and capacity to innovate in social–ecological systems: Applying a gender lens

Development policy increasingly focuses on building capacities to respond to change (adaptation), and to drive change (innovation). Few studies, however, focus specifically on the social and gender differentiation of capacities to adapt and innovate. We address this gap using a qualitative study in three communities in Solomon Islands; a developing country, where rural livelihoods and well-being are tightly tied to agriculture and fisheries. We find the five dimensions of capacity to adapt and to innovate (i.e. assets, flexibility, learning, social organisation, agency) to be mutually dependant. For example, limits to education, physical mobility and agency meant that women and youth, particularly, felt it was difficult to establish relations with external agencies to access technical support or new information important for innovating or adapting. Willingness to bear risk and to challenge social norms hindered both women’s and men’s capacity to innovate, albeit to differing degrees. Our findings are of value to those aspiring for equitable improvements to well-being within dynamic and diverse social–ecological systems.     

Detection and quantitative analysis of 21 veterinary drugs in river water using high-pressure liquid chromatography coupled to tandem mass spectrometry

Introduction

The use of veterinary drugs in food production focuses on the control and improvement of animal health. The disadvantage of this practice is that pharmaceuticals and their metabolites are released into the environment, finding their way to natural water systems and becoming a potential risk to non-target organism.

Methods

This paper reports the development and validation of a quantitative method, based on high-performance liquid chromatography coupled to tandem mass spectrometry, for the simultaneous analysis of 21 veterinary drugs, antimicrobials, corticosteroids, coccidiostats and antifungal agents, in surface water.

Results

The precision of the method was established by calculating the mean recoveries, which were in the range of 94?C101%. The developed method was employed to conduct the first monitoring study on the presence of veterinary drugs in the Galicia region, Northwest of Spain and was applied to 235 surface water samples. Eleven veterinary drugs were detected at concentrations from below the limit of quantification to 2,978.6?ng?L^?1. Limits of detection and quantification were in the range of 6.2 (betamethasone, cortisone, decoquinate, dexamethasone, maduramycin, monensin, narasin, salinomycin, sulfachloropyridazine, sulfamethoxypyridazine and trimethoprim) to 12.5?ng?L^?1 (for the rest of the selected drugs) and 12.5 (betamethasone, cortisone, decoquinate, dexamethasone, maduramycin, monensin, narasin, salinomycin, sulfachloropyridazine, sulfamethoxypyridazine and trimethoprim) to 25.0?ng?L^?1 (for the remaining pharmaceuticals), respectively.

Conclusion

Sulfonamides were the group most frequently found, which are widely used in veterinary medicine.     

Cellulose and Nanocellulose from Maize Straw: An Insight on the Crystal Properties

In this work cellulose was extracted from corn/maize straw (Zea mays) by means of an environmental-friendly multistep procedure involving alkaline treatment and a totally chlorine-free bleaching. This multistep procedure efficiently removed lignin and hemicelluloses. The pulp resulting from each step was characterized by attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR). The optimum pulping time (time of alkaline treatment) was determined by means of thermogravimetric analysis. The extracted cellulose is highly crystalline as verified by X-ray diffraction. The partial acid hydrolysis with sulfuric acid led to the isolation of cellulose whiskers in aqueous suspension as confirmed by light scattering and transmission electron microscopy. The depolarization ratio value of these nanocrystals is the same as that determined for cotton whiskers, showing that this ratio does not depend on the cellulose source. The maize whiskers are arranged laterally in bundles with average thickness around five times that of the crystallite.     

Silica removal in industrial effluents with high silica content and low hardness

High silica content of de-inked paper mill effluents is limiting their regeneration and reuse after membrane treatments such as reverse osmosis (RO). Silica removal during softening processes is a common treatment; however, the effluent from the paper mill studied has a low hardness content, which makes the addition of magnesium compounds necessary to increase silica removal. Two soluble magnesium compounds (MgCl₂?6H₂O and MgSO₄?7H₂O) were tested at five dosages (250–1,500 mg/L) and different initial pH values. High removal rates (80–90 %) were obtained with both products at the highest pH tested (11.5). With these removal efficiencies, it is possible to work at high RO recoveries (75–85 %) without silica scaling. Although pH regulation significantly increased the conductivity of the waters (at pH 11.5 from 2.1 to 3.7–4.0 mS/cm), this could be partially solved by using Ca(OH)₂ instead of NaOH as pH regulator (final conductivity around 3.0 mS/cm). Maximum chemical oxygen demand (COD) removal obtained with caustic soda was lower than with lime (15 vs. 30 %). Additionally, the combined use of a polyaluminum coagulant during the softening process was studied; the coagulant, however, did not significantly improve silica removal, obtaining a maximum increase of only 10 %.     

Atrazine removal by ozonation processes in surface waters

Abstract

Atrazine (6‐chloro‐N‐ethyl‐N'‐isopropyl‐1,3,5‐triazinedyl‐2,4‐diamine) was treated with ozone alone and in combination with hydrogen peroxide or UV radiation in three surface waters. Experiments were carried out in two bubble reactors operated continously. Variables investigated were the ozone partial pressure, temperature, pH, mass flow ratio of oxidants fed: hydrogen peroxide and ozone and the type of oxidation including UV radiation alone. Residence time for the aqueous phase was kept at 10 min. Concentrations of some intermediates, including deethylatrazine, deisopropylatrazine and deethyldeisopropylatrazine, were also followed. The nature of water, specifically the alkalinity and pH were found to be important variables that affected atrazine (ATZ) removal. Surface waters with low alkalinity and high pH allowed the highest removal of ATZ to be reached. There was an optimum hydrogen peroxide to ozone mass flow ratio that resulted in the highest ATZ removal in each surface water treated. This optimum was above the theoretical stoichiometry of the process. Therefore, to reach the maximum removal of ATZ in a O₃/H₂O₂ process, more hydrogen peroxide was needed in the surface waters treated than in ultrapure water under similar experimental conditions. In some cases, UV radiation alone resulted in the removal of ATZ higher than ozonation alone. This was likely due to the alkalinity of the surface water. Ozonation and UV radiation processes yield different amounts of hydrogen peroxide. Combined ozonations (O₃/H₂O₂ and O₃/UV) lead to ATZ removals higher than single ozonation or UV radiation but the formation of intermediates was higher.