National and regional determinants of tropical deforestation in Colombia

Global tropical deforestation continues to occur at high rates despite political attention. National-level forest baselines are being established all over the world to guide the implementation of several policy mechanisms. However, identifying the direct and indirect drivers of deforestation and understanding the complexity of their interlinkages are often difficult. We first analyzed deforestation between 1990 and 2005 at the national level and found an annual deforestation rate of 0.62 %. Next, we performed separate analyses for four natural regions in Colombia and found annual deforestation rates between 0.42 and 1.92 %. Using general linear models, we identified several direct causes and underlying factors influencing deforestation at the national level: rural population density, cattle, protected areas, and slope. Significant differences in deforestation rates and causes were found across regions. In the Caribbean region, drivers of loss are urban population, unsatisfied basic needs, slope, and precipitation and four land use variables (illicit crops, pastures, cattle, and fires). In the Orinoco region, crops are the main driver of forest loss, and in the Amazonian region, deforestation is primarily due to fires related to the colonization front. Policy mechanisms will have to take into account regional patterns to successfully balance development and forest preservation in Colombia.     

Chemo-ecological studies on hexactinellid sponges from the Southern Ocean

Hexactinellids (glass sponges) are an understudied class with syncytial organization and poor procariotic associations, thought to lack defensive secondary metabolites. Poriferans, though, are outstanding sources of bioactive compounds; nonetheless, a growing suspicion suggests that many of these chemicals could be symbiont-derived. In Polar latitudes, sponges are readily invaded by diatoms, which could provide natural products. Hexactinellids are typical of deep waters; but in Antarctica, they dominate the upper shelf providing shelter and food supply to many opportunistic mesograzers and macroinvertebrates, which exert strong ecological pressures on them. Aiming to examine the incidence of defensive activities of hexactinellids against consumption, feeding experiments were conducted using their lipophilic fractions. Antarctic hexactinellid and demosponge extracts were tested against the asteroid Odontaster validus and the amphipod Cheirimedon femoratus as putative sympatric, omnivorous consumers. Hexactinellids yielded greater unpalatable activities towards the amphipod, while no apparent allocation of lipophilic defenses was noted. After chemical analyses on the lipophilic fractions from these Antarctic glass sponges, quite similar profiles were revealed, and no peculiar secondary metabolites, comparable to those characterizing other poriferans, were found. Instead, the lipidic compounds 5α(H)-cholestan-3-one and two glycoceramides were isolated for their particular outspread presence in our samples. The isolated compounds were further assessed in asteroid feeding assays, and their occurrence was evaluated for chemotaxonomical purposes in all the Antarctic samples as well as in glass sponges from other latitudes by NMR and MS. Characteristic sphingolipids are proposed as chemical markers in Hexactinellida, with possible contributions to the classification of this unsettled class.     

Energy consumption analysis of ABS plastic parts injected in a hybrid injection moulding machine

The energy analysis of injection moulding processes is influenced by complex interactions amongst the moulded part, its material, the injection machine, the process parameters and the environmental conditions. The availability of energy usage analyses that comprehend information on specific materials and machine kind is limited. This paper reports a study that estimates and analyses the power usage profile (PUP), the specific energy consumption (SEC), and the energy distribution at an operation level of two different injected parts made of acrylonitrile-butadiene-styrene and produced in a hybrid injection moulding machine. The methodology followed by the authors incorporates an experiment carried out in an industrial facility. A large sample size, and data-acquisition and data post-processing processes to obtain an accurate PUP and SEC are used. A breakdown of the energy consumed by the injection moulding process of the parts studied at an operation level using Sankey diagrams is discussed. The study results are used to identify strategies to reduce the energy consumed by the processes. The methodology employed, and the strategies reported could be used with other plastic parts regardless of the material and machine used. The results reported are new experimental data useful input for theoretical models.     

Microplastics in seawater: sampling strategies,laboratory methodologies,and identification techniques applied to port environment

Environmental Science and Pollution Research - The European Interreg Italy–France 2014–2020 Maritime Project SPlasH! (Stop to Plastics in H2O!) focused on the study of microplastics...     

Kinetics of scrap tyre pyrolysis under vacuum conditions

Scrap tyre pyrolysis under vacuum is attractive because it allows easier product condensation and control of composition (gas, liquid and solid). With the aim of determining the effect of vacuum on the pyrolysis kinetics, a study has been carried out in thermobalance. Two data analysis methods have been used in the kinetic study: (i) the treatment of experimental data of weight loss and (ii) the deconvolution of DTG (differential thermogravimetry) curve. The former allows for distinguishing the pyrolysis of the three main components (volatile components, natural rubber and styrene–butadiene rubber) according to three successive steps. The latter method identifies the kinetics for the pyrolysis of individual components by means of DTG curve deconvolution. The effect of vacuum in the process is significant. The values of activation energy for the pyrolysis of individual components of easier devolatilization (volatiles and NR) are lower for pyrolysis under vacuum with a reduction of 12 K in the reaction starting temperature. The kinetic constant at 503 K for devolatilization of volatile additives at 0.25 atm is 1.7 times higher than that at 1 atm, and that corresponding to styrene–butadiene rubber at 723 K is 2.8 times higher. Vacuum enhances the volatilization and internal diffusion of products in the pyrolysis process, which contributes to attenuating the secondary reactions of the repolymerization and carbonization of these products on the surface of the char (carbon black). The higher quality of carbon black is interesting for process viability.The large-scale implementation of this process in continuous mode requires a comparison to be made between the economic advantages of using a vacuum and the energy costs, which will be lower when the technologies used for pyrolysis require a lower ratio between reactor volume and scrap tyre flow rate.     

Microbial and physicochemical parameters associated with Legionella contamination in hot water recirculation systems

Hot water recirculation systems (HWRS) in hotels and nursing homes, which are common in countries such as Spain, have been related to outbreaks of legionellosis. To establish the relationships of microbial and physicochemical parameters, especially protozoa, with the occurrence of Legionella in HWRS, 231 samples from hotels and nursing homes were analysed for Legionella, protozoa, heterotrophic plate counts (HPC) at 22 and 37 °C, Pseudomonas, metals, temperature and others. Legionella pneumophila was the dominant species isolated, and 22 % were sg. 1. The sampling method became particularly important in order to define which factors were involved on the occurrence of Legionella. Results showed that the bacteria and the accompanying microbiota were more abundant in the first flush water whose temperature was lower. The bacteria occurred in those samples with high HPC and were inversely correlated with high temperatures. Multivariate regression showed that a concentration above 1?×?10⁵?CFU/100 mL of HPC at 37 °C, Fe above 0.095 ppm and the presence of protozoa increased significantly the risk of Legionella colonization, while univariant regression showed that the presence of Cu above 0.76 ppm and temperature above 55 °C diminished it. Therefore, to reduce the risk associated with Legionella occurrence in HWRS these parameters should be taken into consideration.     

Comparison of aerobic and anaerobic stability indices through a MSW biological treatment process

A complex mechanical-biological waste treatment plant designed for the processing of mixed municipal solid wastes (MSW) and source-selected organic fraction of municipal solid wastes (OFMSW) has been studied by using stability indices related to aerobic (respiration index, RI) and anaerobic conditions (biochemical methane potential, BMP). Several selected stages of the plant have been characterized: waste inputs, mechanically treated wastes, anaerobically digested materials and composted wastes, according to the treatment sequence used in the plant. Results obtained showed that the main stages responsible for waste stabilization were the two first stages: mechanical separation and anaerobic digestion with a diminution of both RI and BMP around 40% and 60%, respectively, whereas the third stage, composting of digested materials, produced lesser biological degradation (20-30%). The results related to waste stabilization were similar in both lines (MSW and OFMSW), although the indices obtained for MSW were significantly lower than those obtained for OFMSW, which demonstrated a high biodegradability of OFMSW. The methodology proposed can be used for the characterization of organic wastes and the determination of the efficiency of operation units used in mechanical-biological waste treatment plants.     

Single and combined effects of aluminum (Al<Subscript>2</Subscript>O<Subscript>3</Subscript>) and zinc (ZnO) oxide nanoparticles in a freshwater fish, <Emphasis Type="Italic">Carassius auratus</Emphasis>

The increasing use of nanoparticles (NPs) worldwide has raised some concerns about their impact on the environment. The aim of the study was to assess the toxicity of metal oxide nanoparticles, singly or combined, in a freshwater fish (Carassius auratus). The fish were exposed for 7, 14, and 21 days to different concentrations of NPs (10 μg Al₂O₃.L^?1, 10 μg ZnO.L^?1, 10 μg Al₂O₃.L^?1 plus 10 μg ZnO.L^?1, 100 μg Al₂O₃.L^?1, 100 μg ZnO.L^?1, and 100 μg Al₂O₃.L^?1 plus 100 μg ZnO.L^?1). At the end of each exposure period, antioxidant enzyme activity (catalase, glutathione-S-transferase, and superoxide dismutase), lipid peroxidation, and histopathology were assessed in the gills and livers of C. auratus. The results show an increase in catalase (CAT) and superoxide dismutase (SOD) activity in the gills and livers of fish, especially after 14 days of exposure to single and combined NPs, followed by a reduction at 21 days. An increase in glutathione S-transferase (GST) was observed in gills after 7 days for all tested NP concentrations (single and combined); while in livers, a significant increase was determined after 14 days of exposure to 100 μg.L^?1 of both single ZnO and Al₂O₃ NPs. Lipid peroxidation (LPO) significantly increased in gills after 7 days of exposure to 100 μg.L^?1 Al₂O₃ NPs (single or combined). In livers, LPO increased significantly after 7 days of exposure to all tested concentrations of both single ZnO and Al₂O₃ (except for 10 μg Al₂O₃.L^?1), and after 14 days of exposure to ZnO (10 and 100 μg.L^?1) and Al₂O₃ (100 μg.L^?1)_. The results from histological observations suggest that exposure to metal oxide NPs affected both livers and gills, presenting alterations such as gill hyperplasia and liver degeneration. However, the most pronounced effects were found in gills. In general, this study shows that the tested NPs, single or combined, are capable of causing sub-lethal effects on C. auratus, but when combined, NPs seem to be slightly more toxic than when added alone.     

Environmental performance and spillover effects on productivity: evidence from horticultural firms

This study investigates the effect of environmental investment and related spillover effects on productivity in the agricultural sector by using a panel data of horticultural firms in Andalusia (Southern Spain). The results indicate a positive relationship between firm investment in environmental practices and productivity improvement, also showing the presence of positive environmental spillovers. In a second-stage of analysis, the incidence of environmental factors in firm specific individual technical efficiency is estimated. This analysis also shows the link between environmental knowledge diffusion and horticultural firms' performance.