Physicochemical characterization of hydroxyapatite and its application towards removal of nitrate from water

A laboratory study was conducted to investigate the efficiency of hydroxyapatite (HAP) towards removal of nitrate from synthetic nitrate solution. In the present research HAP synthesized from egg-shell was characterized using SEM, XRD, FTIR and TGA–DSC. The removal of nitrate was 96% under neutral conditions, using 0.3 g of adsorbent in 100 mL of nitrate solution having an initial concentration of 100 mg/L. An adsorption kinetic study revealed that the adsorption process followed first order kinetics. Adsorption data were fitted to a linearly transformed Langmuir isotherm with correlation coefficient (R²) > 0.98. Thermodynamic parameters were also calculated to study the effect of temperature on the removal process. In order to understand the adsorption type, equilibrium data were tested with the Dubinin–Radushkevich isotherm. The process was rapid and equilibrium was established within the first 40 min.     

Identifying Riparian Buffer Effects on Stream Nitrogen in Southeastern Coastal Plain Watersheds

Within the Southeastern (SE) Coastal Plain of the U.S., numerous freshwaters and estuaries experience eutrophication with significant nutrient contributions by agricultural non-point sources (NPS). Riparian buffers are often used to reduce agricultural NPS yet the effect of buffers in the watershed is difficult to quantify. Using corrected Akaike information criterion (AIC_c) and model averaging, we compared flow-path riparian buffer models with land use/land cover (LULC) models in 24 watersheds from the SE Coastal Plain to determine the ability of riparian buffers to reduce or mitigate stream total nitrogen concentrations (TNC). Additional models considered the relative importance of headwaters and artificial agricultural drainage in the Coastal Plain. A buffer model which included cropland and non-buffered cropland best explained stream TNC (R ² = 0.75) and was five times more likely to be the correct model than the LULC model. The model average predicted that current buffers removed 52 % of nitrogen from the edge-of-field and 45 % of potential nitrogen from the average SE Coastal Plain watershed. On average, 26 % of stream nitrogen leaked through buffered cropland. Our study suggests that stream TNC could potentially be reduced by 34 % if buffers were adequately restored on all cropland. Such estimates provide realistic expectations of nitrogen removal via buffers to watershed managers as they attempt to meet water quality goals. In addition, model comparisons of AIC_c values indicated that non-headwater buffers may contribute little to stream TNC. Model comparisons also indicated that artificial drainage should be considered when accessing buffers and stream nitrogen.     

Synthesizing habitat connectivity analyses of a globally important human-dominated tiger-conservation landscape

As ecological data and associated analyses become more widely available, synthesizing results for effective communication with stakeholders is essential. In the case of wildlife corridors, managers in human-dominated landscapes need to identify both the locations of corridors and multiple stakeholders for effective oversight. We synthesized five independent studies of tiger (Panthera tigris) connectivity in central India, a global priority landscape for tiger conservation, to quantify agreement on landscape permeability for tiger movement and potential movement pathways. We used the latter analysis to identify connectivity areas on which studies agreed and stakeholders associated with these areas to determine relevant participants in corridor management. Three or more of the five studies’ resistance layers agreed in 63% of the study area. Areas in which all studies agree on resistance were of primarily low (66%, e.g., forest) and high (24%, e.g., urban) resistance. Agreement was lower in intermediate resistance areas (e.g., agriculture). Despite these differences, the studies largely agreed on areas with high levels of potential movement: >40% of high average (top 20%) current-flow pixels were also in the top 20% of current-flow agreement pixels (measured by low variation), indicating consensus connectivity areas (CCAs) as conservation priorities. Roughly 70% of the CCAs fell within village administrative boundaries, and 100% overlapped forest department management boundaries, suggesting that people live and use forests within these priority areas. Over 16% of total CCAs’ area was within 1 km of linear infrastructure (437 road, 170 railway, 179 transmission line, and 339 canal crossings; 105 mines within 1 km of CCAs). In 2019, 78% of forest land diversions for infrastructure and mining in Madhya Pradesh (which comprises most of the study region) took place in districts with CCAs. Acute competition for land in this landscape with globally important wildlife corridors calls for an effective comanagement strategy involving local communities, forest departments, and infrastructure planners.     

Adsorption of PCDD/F on MWI fly ash

The removal of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) from waste incinerator off-gas is a costly task, because a considerable part of the PCDD/F may exist in the gas phase (often 50-100% around 200 degrees C). The volatile fraction passes the particle filter and the subsequent gas cleaning equipment, so that an additional unit is needed to remove the gaseous PCDD/F from the flue gas. Moreover, dioxins and furans can accumulate in some parts of the equipment in a way that they can act as a latent source. In this work, we investigate the possibility to adsorb the PCDD/F at the fly ash particles and to remove them during the filtration. The gas/particle partitioning of the PCDD/F depends on the temperature, the vapor pressure, the particle size, the particle number density and on the physical and chemical properties of the particle surface. These relationships are investigated by model calculations and by pilot scale experiments (500 Nm3/h) which employ one selected hexachlorinated dioxin congener. At room temperature, approx. 90% of the HxCDD are found in the particulate phase, while at 135 degrees C that portion is only 10%. This means that at ambient temperatures, the gas/particle partitioning of the dioxin corresponds well to the sublimation equilibrium. At higher temperatures, it is much different from the sublimation equilibrium and the apparent adsorption enthalpy is smaller than the enthalpy of sublimation. This observation is in agreement with literature data. From the above experiments and from similar literature data, the efficiency of fly ash particles as a sink for PCDD/F can be evaluated. The data suggest that the adsorption rate is not the limiting factor for the transfer into the particulate phase. The important factors appear to be the chemical composition of the fly ash and the temperature.     

Motor-vehicle boarding and alighting injury--how large a problem?

The Journal of Safety Research has partnered with the National Center for Injury Prevention and Control at the Centers for Disease Control and Prevention (CDC) in Atlanta, Georgia, USA, to briefly report on some of the latest findings in the research community. This report is the fifth in a series of CDC articles.     

Characterization and modeling of nutrient-deficient tomato-processing wastewater treatment using an anaerobic/aerobic system

Tomato-processing wastewaters are typical of slowly biodegradable high strength wastewaters generated from the food canning industry. Three different samples of influent and three samples of anaerobic effluents corresponding to the three influents collected from an on-site pilot-scale anaerobic/aerobic system were characterized using respirometric methods. Respirometric studies demonstrated that the pretreatment in the anaerobic reactor of the pilot-scale system increased the readily biodegradable fraction from an average of 40% of the SCOD in the influent to 50% of the SCOD in the anaerobic effluent, improved kinetics from an average micro(max) of 1.5d(-1) in the influent to 3.5d(-1) in the anaerobic effluent, and eliminated nutrient deficiency. Furthermore, the system was calibrated and simulated by application of wastewater characterization and biokinetic data derived form respirometric tests of influent and anaerobic effluent in Activated Sludge Model no.1 (ASM1).     

The emperor's new clothes — Reflections on strategic environmental assessment (SEA) practice in South Africa

This paper presents the results of research which evaluated the performance of strategic environmental assessment (SEA) practice in South Africa in order to develop understanding of how SEA functions within a developing country with a voluntary SEA system. The research applied a combination of methods in a mixed research strategy, including a macro level survey of the SEA system together with case study reviews exploring micro level application. Three main ‘system features’ emerged, namely expansion of voluntary practice, diversity in practice and general ineffectiveness. The results also highlight a number of ‘application features’ such as a lack of focus due to an inability to deal with the concepts of ‘sustainability’ and ‘significance’, as well as poor understanding and integration with decision-making processes. Moreover, it emerged that none of the case studies seem to have conducted an ‘assessment’ per se, but rather provided a framework for strategic decision-making. The paper puts forward a number of interrelated explanations for these system and application features. In a parallel to the fable of the ‘emperor's new clothes’, SEA in South Africa appears to be regarded as the answer to all environmental problems, whilst being ineffective in practice.     

Prediction models for the flash point of pure components

The flash point for a liquid is defined as the lowest temperature at which its vapor forms a spontaneously ignitable mixture when brought in contact with air. Having a good estimation of the flash point temperature at normal conditions is relevant because it is one of the main properties used to characterize fire and explosion hazards for liquids. Most of predictive correlations in the literature include a physical effect by including the normal boiling temperature in their formulation. To achieve combustion, sufficient evaporation is required and then a part of the liberated energy from the combustion is used to support the evaporation. Thus the evaporation energy and a chemical effect given by the heat of reaction are incorporated in this work. It is firstly verified that the relation between the flash point temperature and the normal boiling temperature tends to be a constant. Thus a heuristic approach based on 611 chemical species of diverse families indicates that this relation is around 0.75. The dispersion of the error has been reduced by using two proposed correlations where both physical and chemical properties are included in the model. In particular, the second equation is based on the group contributions method, which has been developed for alkanes. This method is in fact a combination of the group contributions method and the first model to overcome the difficulties in predicting isomeric differences.     

Removal of arsenate from water by adsorbents: a comparative case study

Laboratory and field filtration experiments were conducted to study the effectiveness of As(V) removal for five types of adsorbent media. The media included activated alumina (AA), modified activated alumina (MAA), granular ferric hydroxide (GFH), granular ferric oxide (GFO), and granular titanium dioxide (TiO?). In laboratory batch and column experiments, the synthetic challenge water was used to evaluate the effectiveness for five adsorbents. The results of the batch experiments showed that the As(V) adsorption decreased as follows at pH 6.5: TiO? > GFO > GFH > MAA > AA. At pH 8.5, however, As(V) removal decreased in the following order: GFO = TiO? > GFH > MAA > AA. In column experiments, at pH 6.5, the adsorbed As(V) for adsorbents followed the order: TiO? > GFO > GFH, whereas at pH 8.5 the order became: GFO = TiO? > GFH when the challenge water containing 50 μg/L of As(V) was used. Field filtration experiments were carried out in parallel at a wellhead in New Jersey. Before the effluent arsenic concentration increased to 10 μg/L, approximately 58,000 and 41,500 bed volumes of groundwater containing an average of 47 μg/L of As(V) were treated by the filter system packed with GFO and TiO?, respectively. The As(V) adsorption decreased in the following sequence: GFO > TiO? > GFH > MAA > AA. Filtration results demonstrated that GFO and TiO? adsorbents could be used as media in small community filtration systems for As(V) removal.