Surface roughness prediction in milling based on tool displacements

In this paper, an experimental device using non-contact displacement sensors for the investigation of milling tool behaviour is presented. It enables the recording of high frequency tool vibrations during milling operations. The aim of this study is related to the surface topography prediction using tool displacements and based on tool center point methodology. From the recorded signals and the machining parameters, the tool deformation is modeled. Then, from the calculated deflection, the surface topography in 3D can be predicted. In recent studies, displacements in XY plane have been measured to predict the surface topography in flank milling. In this article, the angular deflection of the tool is also considered. This leads to the prediction of surfaces obtained in flank milling as well as in end milling operations. Validation tests were carried out: the predicted profiles were compared to the measured profile. The results show that the prediction corresponds well in shape and amplitude with the measurement.     

Bulk carbon, oxygen, and hydrogen stable isotope composition of recent resins from amber-producing Hymenaea

Resins of Hymenaea, an angiosperm tree genus known to be a copious resin producer and a major source of amber since the Oligo-Miocene, were collected from a wide range of tropical environments from Latin America and Africa, and analyzed for their carbon, hydrogen, and oxygen stable isotope composition. The average value for ¹³C in the resins was found to be –27.0±1.3, which is very similar to the values reported for resins in other studies. ¹⁸ values for the Hymenaea resins averaged +11.2±1.6, or about 20 more depleted than normal plant cellulose. D values of the resins ranged from –196 to –319, with an average of –243±30. Rough estimates suggest a fractionation of –200 to –210 between the resins and the environmental water. This value is similar to the –200 value observed for the fractionation between other plant lipids and environmental water. The present study suggests that the stable isotope composition of fossil resins (amber) has the potential to provide information on ancient environmental waters.     

Organochlorine pesticides in soils under different land usage in the Taihu Lake region, China

A field study was conducted in the Taihu Lake region, China in 2004 to reveal the organochlorine pesticide concentrations in soils after the ban of these substances in the year 1983. Thirteen organochlorine pesticides (OCPs) were analyzed in soils from paddy field, tree land and fallow land. Total organochlorine pesticide residues were higher in agricultural soils than in uncultivated fallow land soils. Among all the pesticides, ΣDDX (DDD, DDE and DDT) had the highest concentration for all the soil samples, ranging from 3.10 ng/g to 166.55 ng/g with a mean value of 57.04 ng/g and followed by ΣHCH, ranging from 0.73 ng/g to 60.97 ng/g with a mean value of 24.06 ng/g. Dieldrin, endrin, HCB and α-endosulfan were also found in soils with less than 15 ng/g. Ratios of p,p'-(DDD DDE)/DDT in soils under three land usages were: paddy field ＞ tree land ＞ fallow land, indicating that land usage inlfuenced the degradation of DDT in soils. Ratios of p,p'-(DDD DDE)/DDT ＞1, showing aged residues of DDTs in soils of the Taihu Lake region. The results were discussed with data from a former study that showed very low actual concentrations of HCH and DDT in soils in the Taihu Lake region, but according to the chemical half-lives and their concentrations in soils in 1980s, the concentration of DDT in soils seemed to be underestimated. In any case our data show that the ban on the use of HCH and DDT resulted in a tremendous reduction of these pesticide residues in soils, but there are still high amounts of pesticide residues in soils, which need more remediation processes.     

International standardized procedures for in vivo evaluation of multi-walled carbon nanotube toxicity in water

The classical approach in ecotoxicological evaluation of chemical substances consists of conducting standardized bioassays on organism models. In this work, the potential impact of industrial multi-walled carbon nanotubes was investigated by ecotoxicological standardized procedures using aquatic organisms of different trophic levels, namely bacteria, green algae, invertebrates, fish, and amphibians. The results indicated (1) inhibition of growth in amphibians at 50 mg L^?1 and higher, and (2) no effects on daphnia and fish up to 100 mg L^?1. With the exception of algae (for which Fe deficiency is measured), it seems that the observed toxicity may be due to physiological effects in relation to the ingestion of carbon nanotubes not necessarily related to their intrinsic effects.     

OHP02 gravity wave campaign in relation to optical turbulence

Herein we present a campaign dedicated to the detection and the characterization of Gravity Waves (GW) in the Earth’s atmosphere in relation to the generation of Optical Turbulence (OT). The observations took place in France from 17 to 24 July 2002 at the Haute Provence Observatory (OHP) and simultaneously at the Sirene Observatory, some 20 km apart. From both sites, several balloons were launched that measured the classical PTU-Wind profiles and additionally the structure constant of the temperature field vertical profiles. A Generalized Scidar (GS) technique was implemented at the 1.93 m-diameter OHP telescope, providing profiles every minute. From our observations, a significant amount of GW activity was observed at both sites, but without clear evidence of correlation between the two sites. It seems from our observations that a wide spectrum of GW is present at a given altitude and that this could result in a lack of correlation between observations made from two sites 20 km apart. Most GW are non-stationary with long horizontal wavelengths (λ ∼ 100–200 km), kilometric vertical wavelengths (λ ~ 0.5–2 km) and long intrinsic period (T ~ 2–15 h). They belong in the category of “hydrostatic rotating or non-rotating waves”. Layers of optical turbulence detected by balloons and the Scidar technique correlate well with regions of GW activity. The U.S. Government’s right to retain a non-exclusive, royalty-free license in and to any copyright is acknowledged.     

Modeling of Escherichia coli Fluxes on a Catchment and the Impact on Coastal Water and Shellfish Quality1

Bougeard, Morgane, Jean‐Claude Le Saux, Nicolas Pérenne, Claire Baffaut, Marc Robin, and Monique Pommepuy, 2011. Modeling of Escherichia coli Fluxes on a Catchment and the Impact on Coastal Water and Shellfish Quality. Journal of the American Water Resources Association (JAWRA) 1‐17. DOI: 10.1111/j.1752‐1688.2011.00520.x Abstract: The simulation of the impact of Escherichia coli loads from watersheds is of great interest for assessing estuarine water quality, especially in areas with shellfish aquaculture or bathing activities. For this purpose, this study investigates a model association based on the Soil and Water Assessment Tool (SWAT) coupled with a hydrodynamic model (MARS 2D; IFREMER). Application was performed on the catchment and estuary of Daoulas area (France). The daily E. coli fluxes simulated by SWAT are taken as an input in the MARS 2D model to calculate E. coli concentrations in estuarine water and shellfish. Model validation is based on comparison of frequencies: a strong relationship was found between calculated and measured E. coli concentrations for river quality (r² = 0.99) and shellfish quality (r² = 0.89). The important influence of agricultural practices and rainfall events on the rapid and large fluctuations in E. coli fluxes from the watershed (reaching three orders of magnitude in <24 hours) is one main result of the study. Response time in terms of seawater quality degradation ranges from one to two days after any important rainfall event (greater than 10 mm/day) and the time for estuary to recover good water quality also mainly depends on the duration of the rainfall. In the estuary, three effects (rainfall, tidal dilution, and manure spreading) have been identified as important influences.     

Nutrient Sources and Transport in the Missouri River Basin,with Emphasis on the Effects of Irrigation and Reservoirs1

Brown, Juliane B., Lori A. Sprague, and Jean A. Dupree, 2011. Nutrient Sources and Transport in the Missouri River Basin, With Emphasis on the Effects of Irrigation and Reservoirs. Journal of the American Water Resources Association (JAWRA) 47(5):1034‐1060. DOI: 10.1111/j.1752‐1688.2011.00584.x Abstract: SPAtially Referenced Regressions On Watershed attributes (SPARROW) models were used to relate instream nutrient loads to sources and factors influencing the transport of nutrients in the Missouri River Basin. Agricultural inputs from fertilizer and manure were the largest nutrient sources throughout a large part of the basin, although atmospheric and urban inputs were important sources in some areas. Sediment mobilized from stream channels was a source of phosphorus in medium and larger streams. Irrigation on agricultural land was estimated to decrease the nitrogen load reaching the Mississippi River by as much as 17%, likely as a result of increased anoxia and denitrification in the soil zone. Approximately 16% of the nitrogen load and 33% of the phosphorus load that would have otherwise reached the Mississippi River was retained in reservoirs and lakes throughout the basin. Nearly half of the total attenuation occurred in the eight largest water bodies. Unlike the other major tributary basins, nearly the entire instream nutrient load leaving the outlet of the Platte and Kansas River subbasins reached the Mississippi River. Most of the larger reservoirs and lakes in the Platte River subbasin are upstream of the major sources, whereas in the Kansas River subbasin, most of the source inputs are in the southeast part of the subbasin where characteristics of the area and proximity to the Missouri River facilitate delivery of nutrients to the Mississippi River.     

A comparative study on arsenic and humic substances in alluvial aquifers of Bengal delta plain (NW Bangladesh), Chianan plain (SW Taiwan) and Lanyang plain (NE Taiwan): implication of arsenic mobilization mechanisms

Humic substances in groundwater and aquifer sediments from the arsenicosis and Blackfoot disease (BFD) affected areas in Bangladesh (Bengal delta plain) and Taiwan (Lanyang plain and Chianan plain) were characterized using fluorescence spectrophotometry and Fourier transform infrared (FT-IR) spectroscopy. The results demonstrate that the mean concentration of As and relative intensity of fluorescent humic substances are higher in the Chianan plain groundwater than those in the Lanyang plain and Bengal delta plain groundwater. The mean As concentrations in Bengal delta plain, Chianan plain, and Lanyang plain are 50.65 μg/l (2.8–170.8 μg/l, n = 20), 393 μg/l (9–704 μg/l, n = 5), and 104.5 μg/l (2.51–543 μg/l, n = 6), respectively. Average concentrations and relative fluorescent intensity of humic substances in groundwater are 25.381 QSU (quinine standard unit) and 17.78 in the Bengal delta plain, 184.032 QSU and 128.41 in the Chianan plain, and 77.56 QSU and 53.43 in the Lanyang plain. Moreover, FT-IR analysis shows that the humic substances extracted from the Chianan plain groundwater contain phenolic, alkanes, aromatic ring and amine groups, which tend to form metal carbon bonds with As and other trace elements. By contrast, the spectra show that humic substances are largely absent from sediments and groundwater in the Bengal delta plain and Lanyang plain. The data suggest that the reductive dissolution of As-adsorbed Mn oxyhydroxides is the most probable mechanism for mobilization of As in the Bengal delta plain. However, in the Chianan plain and Lanyang plain, microbially mediated reductive dissolution of As-adsorbed amorphous/crystalline Fe oxyhydroxides in organic-rich sediments is the primary mechanism for releasing As to groundwater. High levels of As and humic substances possibly play a critical role in causing the unique BFD in the Chianan plain of SW Taiwan.     

The role of body size and fighting experience in predicting contest behaviour in the black field cricket, <Emphasis Type="Italic">Teleogryllus commodus</Emphasis>

Body size strongly predicts fighting behaviour and outcome in many species, with the larger opponent usually winning contests. However, recent fighting experience can have a strong influence on the establishment of dominance hierarchies, with recent winners being more likely to win subsequent contests, while recent losers are more likely to lose. Recent fighting experience therefore has the potential to modify the effect of body size in determining contest behaviour and outcome. Here, we investigate whether recent fighting experience weakens the role of body size in predicting contest behaviour in the black field cricket, Teleogryllus commodus. We compared the role of body size in determining contest outcome during initial non-physical encounters and escalated aggressive physical encounters (grapples), as well as the probability of escalation occurring, in contests involving either a naïve or experienced smaller male against a naïve larger male. We found that recent fighting experience only affected contest outcome during non-physical encounters. Once a contest had escalated into grappling, the effect of previous wins and losses was no longer apparent and body size strongly predicted contest outcome. Thus, once males can directly assess their opponent's fighting ability, recent fighting experience did not alter the effect of body size on contest behaviour and outcome.     

Antifouling paints: Use on boats in San Diego Bay and a way to minimize adverse impacts

High concentrations of copper and tributyltin, two biocides used in antifouling paints, are found in harbors. Efforts are necessary to reduce the adverse impact of biocides from antifouling paints, but little is known about the actual use of such material. I surveyed the operators of 435 boats berthed in San Diego Bay, to determine what paints and maintenance procedures were being used.More than 90% of the respondents used conventional leaching paints. These paints contain 40% to 65% copper compounds and 3% to 7% tributyltin compounds. Few respondents used copolymer paints. Those who did use copolymer paints seemed to repaint less frequently than those using conventional leaching paints.Professional maintenance companies do not initiate repainting as frequently as individuals doing their own maintenance.It appears that the input of antifouling biocides to harbor waters could be reduced by at least one-third simply by educating boat-owners about the chemical mechanisms involved in antifouling paints, by explaining the environmental and economic advantages of using slow-release paints, and by encouraging them not to repaint until their paint's useful life has expired.