Finding all optimal solutions to the reserve site selection problem: formulation and computational analysis

The problem of selecting nature reserves has received increased attention in the literature during the past decade, and a variety of approaches have been promoted for selecting those sites to include in a reserve network. One set of techniques employs heuristic algorithms and thus provides possibly sub-optimal solutions. Another set of models and accompanying algorithms uses an integer programming formulation of the problem, resulting in an optimization problem known as the Maximal Covering Problem, or MCP. Solution of the MCP provides an optimal solution to the reserve site selection problem, and while various algorithms can be employed for solving the MCP they all suffer from the disadvantage of providing a single optimal solution dictating the selection of areas for conservation. In order to provide complete information to decision makers, the determination of all alternate optimal solutions is necessary. This paper explores two procedures for finding all such solutions. We describe the formulation and motivation of each method. A computational analysis on a data set describing native terrestrial vertebrates in the state of Oregon illustrates the effectiveness of each approach.     

Persistent organic pollutants in mangrove food webs in Singapore

In this study, persistent organic pollutants were quantified in sediments, subsurface seawater, sea-surface microlayer and twenty-four biota species collected at two separate mangrove habitats in Singapore. Data confirmed the ubiquity of POPs, including polybrominated diphenyl ethers (PBDEs), in the marine environment of Singapore. A biomagnification phenomenon was observed amongst the species collected and analysed from both mangrove sites studied. Thunder crabs and fish displayed the highest POP levels. Congener profiles of PBDEs varied amongst mangrove biota species and suggested different metabolic pathways exist for flame retardants. Similarly, crab species showed an ability to metabolize chlordane insecticide.     

Organochlorine pesticides, polychlorinated biphenyls and polybrominated diphenyl ethers in Singapore's coastal marine sediments

Persistent organic pollutants (POPs) are ubiquitous pollutants in the marine environment, particular in coastal areas affected by industry and shipping traffic. POPs are known for their recalcitrance and toxicity in the environment, and there is increasing concern over their global distribution and impact upon wildlife. Marine surface sediment samples taken within 6 km of the coastline of Singapore were analyzed to determine prevailing concentrations of organochlorine pesticides (OCPs), polychlorinated biphenyl (PCBs) and polybrominated diphenyl ethers (PBDEs). Total PCB concentrations varied widely from 1.4 to 329.6 ng/g (average 73.9 ng/g), where high concentrations were detected at sample locations closest to industrial areas with intensive shipping traffic. Total DDT concentrations ranged from 2.2 to 11.9 ng/g (average 6.7 ng/g) and were lower than the concentration range of 3.3-46.2 ng/g measured for total HCH (average 18.1 ng/g). Ratios of DDT/(DDE+DDD) in sediments do not indicate recent inputs of DDT into Singapore's marine environment, but high concentrations of alpha-HCH and gamma-HCH show evidence for the usage of HCHs in Southeast Asia. Peak concentrations of cis- and trans-Chlordane were 10 ng/g. Among the PBDE congeners BDE 47, 99, and 100 only BDE 47 could be detected at a range of 3.4-13.8 ng/g (average 6.2 ng/g). The levels of OCPs, PCBs and PBDEs were compared to available data for other countries in Asia, and indicated relatively moderate levels of contamination. Peak concentrations of PCBs, HCH isomers, Chlordane, Heptachlor, Heptachlor epoxide and Dieldrin have the potential to induce ecotoxicological impacts based on levels specified in the sediment quality standards of the USEPA and Canadian Council of Ministers of the Environment.     

Temporal and spatial relationships in fine particle strong acidity, sulphate, PM1O, and PM2.5 across multiple canadian locations

The Canadian Acid Aerosol Measurement Program (CAAMP) was established in 1992 to gain a better understanding of the atmospheric behaviour of fine particle strong acidity (“acid aerosols”) and to facilitate an assessment of the potential health risks associated with acid aerosols and particles in general. During 1992. 1993 and 1994, annular denuder and filter measurements were taken at four sites in Ontario, two in Quebec, three in the Atlantic Provinces and one in the greater Vancouver area. Mean fine particle sulphate concentrations (SO₄²⁻) were highest in southern Ontario (annual average ranged from 40–70 nmol m⁻³), lowest at a site in the Vancouver area (average = 16 nmol m⁻³) and second lowest in rural Nova Scotia. However, mean fine particle strong acid concentrations (H⁺) were geographically different. The highest mean concentrations were at the east coast sites (annual average of up to 30 nmol m⁻³). Acidities were lower in areas where the fine particle acidity experienced greater neutralization from reaction with ammonia. This included the major urban centres (i.e. Toronto and Montréal) and areas with greater amounts of agricultural activity, as in rural southern Ontario. On average, ambient concentrations of fine and coarse particle mass were larger in the urban areas and also in areas where SO₄²⁻ levels were higher. All the particle components were episodic. However, compared to SO₄²⁻ and fine particles (PM_2.5 or PM_2.1, depending upon inlet design), episodes of H⁺ tended to be less frequent and of shorter duration, particularly in Ontario. Saint John, New Brunswick, had the highest mean annual H⁺ concentration, which was 30 nmol m⁻³. H⁺ episodes (24 h concentration > 100 nmol m⁻³) were also the most frequent at this location. The high levels in Saint John were partially due to local sulphur dioxide sources and heterogeneous chemistry occurring in fog, which, on average, led to a 50% enhancement in sulphate, relative to upwind conditions.There was a substantial amount of intersite correlation in the day to day variations in H⁺, SO₄²⁻ , PM_2.5 and PM₁₀ (fine + coarse particles) concentrations, which is due to the influence of synoptic-scale meteorology and the relatively long atmospheric lifetime of fine particles. Sulphate was the most regionally homogenous species. Pearson correlation coefficients comparing SO₄²⁻ between sites ranged from 0.6 to 0.9, depending on site separation and lag time. In many cases, particle episodes were observed to move across the entire eastern portion of Canada with about a two-day lag between the SO₄²⁻ levels in southern Ontario and in southern Nova Scotia.     

Ozone dynamics and deposition processes at a deforested site in the Amazon basin

The goal of this study is to investigate the impact of deforestation on ozone dynamics and deposition in the Brazilian Amazon basin. This goal is accomplished through i) analyses of ozone levels and deposition rates at a deforested site during the rainy season; and ii) comparisons of these data with similar information derived at a forest. At the pasture site maximum ozone mixing ratios reach 20 parts per billion on a volume basis (ppbv) but about 6 ppbv prevail over the forest. Maximum ozone deposition velocities for pastures can reach 0.7 cm s-1, which is about threefold lower than values derived for forests. Combining ozone abundance and deposition velocities, pasture maximum ozone fluxes reach approximately 0.2 microgram (ozone) m-2 s-1. This flux represents approximately 70% of the deposition rates measured over the forest. Hence, this study suggests that conversion of rainforests to pastures could lead to a net reduction (30%) in the ozone sink in the Amazon.     

Improving the extraction of tetrachloroethylene from soil columns using surfactant gradient systems

In this work, we extend the recently developed gradient approach for surfactant-enhanced remediation of dense non-aqueous phase liquid (DNAPL)-impacted sites. The goal of the gradient approach is to maximize the DNAPL solubilization capacity in swollen micelles (Type I aqueous microemulsions) while at the same time minimizing the potential for DNAPL mobilization. In this work, we introduce a modified version of the capillary/trapping curve that we refer to as the gradient curve to help interpret and/or design the gradient approach. The gradient curve presents the residual DNAPL saturation as a function of interfacial tension and microemulsion viscosity. This approach demonstrates that keeping a low viscosity of the microemulsion phase is not only important for keeping a low head loss during surfactant flooding but also to prevent oil mobilization. Eight microemulsion systems were evaluated in this research; these systems were evaluated based on their tetrachloroethylene (PCE) solubilization capacity, interfacial tension (IFT), viscosity, density, and coalescence kinetics. Two of these systems were chosen for evaluation in site-specific column tests using an increasing electrolyte gradient to produce a decreasing IFT/increasing solubilization gradient system. The column studies were conducted with media from Dover Air Force Base in Dover, DE. Both solubilized and mobilized DNAPL were quantified. During the column studies, we observed that substantial PCE was mobilized when the residual level of PCE in the column was significantly higher than the steady-state residual saturation level being approach (as predicted from the gradient curve). Four column studies were performed, three of which were used to asses the validity of the gradient curve in predicting the residual saturation after each gradient step. From these tests we observed that starting IFTs of less than 1 mN/m all produced the same mobilization potential. In the last column, we used an additional gradient step with an initial IFT above 1 mN/m to dramatically reduce the amount of PCE mobilize. Based on the good agreement between column results and projections based on the gradient curve, we propose this as a preferred method for designing gradient surfactant flushing systems.     

Oxidation of polycyclic aromatic hydrocarbons by fungal isolates from an oil contaminated refinery soil

BACKGROUND AND OBJECTIVE: Indigenous soil microorganisms are used for the biodegradation of petroleum hydrocarbons in oily waste residues from the petroleum refining industry. The objective of this investigation was to determine the potential of indigenous strains of fungi in soil contaminated with petroleum hydrocarbons to biodegrade polycyclic aromatic hydrocarbons (PAH). MATERIALS AND METHODS: Twenty one fungal strains were isolated from a soil used for land-farming of oily waste residues from the petrochemical refining industry in Singapore and identified to genus level using laboratory culture and morphological techniques. Isolates were incubated in the presence of 30 mg/L of phenanthrene over a period of 28 days at 30 degrees C. The most effective strain was further evaluated to determine its ability to oxidise a wider range of PAH compounds of various molecular weight i.e acenaphthene, fluorene, fluoranthene, chrysene, benzo(a)pyrene and dibenz(ah)anthracene RESULTS AND DISCUSSION: After 28 days of incubation, 18 of the 21 fungal cultures were capable of oxidising over 50% of the phenanthrene present in culture medium, relative to abiotic controls. Fungal isolate, Penicillium sp. 06, was able to oxidise 89% of the phenanthrene present. This isolate could also oxidise more than 75% of the acenaphthene, fluorene and fluoranthene after 30 days of incubation. However, the oxidation of high molecular weight PAH i.e. chrysene, benzo(a)pyrene and dibenz(ah)anthracene by the Penicillium sp. 06 isolate was limited, where the extent of oxidation was inversely proportional to PAH molecular weight. CONCLUSIONS: Fungal isolate, Penicillium sp. 06, was effective at oxidising a range of PAH in petroleum contaminated soils, but higher molecular weight PAH were more recalcitrant. RECOMMENDATIONS AND OUTLOOK: There is potential for the re-application of this fungal strain to soil for bioremediation purposes.     

The trophic linkage between zooplankton and benthic suspension feeders: direct evidence from analyses of bivalve faecal pellets

Using radiotracer (¹⁴C) and microscopic observation, we demonstrated that mussels (Mytilus edulis and Perna viridis) could be predators of mesozooplankton (rotifer Brachionus plicatilis). At radio-labelled rotifer densities of 0.1, 0.2, 0.5, 1.0 individual ml⁻¹, faecal pellets of mussels showed different degrees of radio signals and most of the faecal pellets were expelled 4 h after pulse feeding on rotifers. The maximum gut retention time (GRT) of ¹⁴C-labelled rotifers in the digestive diverticula did not o show any significant difference between the two mussel species or the different densities of rotifers, and the averaged GRT was 43.4±3.06 h (mean ± SE). At a rotifer density of 4.5 individual ml⁻¹, rotifer lorica pieces and rotifer bodies without eggs were found in faeces of M. edulis, while in the pseudofaeces, only complete rotifer bodies were found.     

Induced alkaloid defence inAtropa acuminata in response to mechanical and herbivore leaf damage

Summary Measurement of tropane alkaloid content in leaves ofAtropa acuminata after mechanical damage showed a maximum increase to 153% of the control 8 days later. There were no changes in the root or stem after similar damage. The plant responded to repeated mechanical damage by doubling its alkaloid content at 11 days after the initial wounding. But on further treatments, there was a slight decrease in alkaloid content with time. Mollusc feeding produced an increase of 164% in alkaloid content after 4 days. These results indicate that induced defence systems in angiosperms can vary considerably from plant species to plant species and that the effects of mechanical damage may differ in different parts of the same plant.