Multivariate analysis of mineral constituents of edible Parasol Mushroom (Macrolepiota procera) and soils beneath fruiting bodies collected from Northern Poland

Caps and stipes of 141 fruiting bodies of Parasol Mushroom (Macrolepiota procera) and surface layer of soils collected from 11 spatially distant and background (pristine) areas in Northern Poland were analyzed for Ag, Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Na, Ni, P, Pb, Rb, Sr, and Zn by inductively coupled plasma optical emission spectroscopy and cold vapor atomic absorption spectroscopy. In terms of bioconcentration and bioexclusion concept, K, Ag, Cu, Rb, and P were highly bioconcentrated in caps, and their bioconcentration factor values varied for the 11 sites between 120 and 500—67–420, 70–220, 10–170, and 45–100, respectively. Cd, Zn, Mg, and Na showed bioconcentration factors (BCFs) between 3.3 and 36, 3.7–15, 0.92–6.3, and 1.4–44 while Al, Ba, Ca, Co, Cr, Mn, Ni, Pb, and Sr were excluded (BCF < 1). The Parasol Mushroom is a species harvested in the wild, and its caps are of unique taste and can contain a spectrum of essential and hazardous mineral compounds accumulated at elevated concentrations, even if collected at the background (pristine) areas. These elevated mineral concentrations of the caps are due to the efficient bioconcentration potential of the species (K, Ag, Cu, Rb, P, Cd, Zn, Mg, and Na) and abundance in the soil substrates (Al, Ca, Fe, Mn). The estimated intake rates of Cd, Hg, and Pb contained in Parasol Mushroom’s caps show a cause for concern associated with these metals resulting from the consumption of between 300- and 500-g caps daily, on a frequent basis in the mushrooming season.     

Metals in edible fish from Vistula River and Dead Vistula River channel, Baltic Sea

Metals including Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Na, Ni, Pb, Sr and Zn were determined in muscle tissue of 12 fish species by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and cold vapour-atomic absorption spectroscopy (CV-AAS). Fish were collected from Vistula River at lower course and Dead Vistula River channel in south of Baltic Sea in Poland. The fish species examined include Round Goby (Neogobius melanostomus), Crucian Carp (Carassius carassius), Bull-rout (Myoxocephalus scorpius), Tench (Tinca tinca), Bream (Abramis brama), Burbot (Lota lot), Perch (Perca perca), Roach (Rutilus rutilus), Silver Carp (Hypophthalmichthys molitrix), Pikeperch (Stizostediun lucioperca), Brown salmon (Salmo trutta m. Trutta) and Eel (Anguilla anguilla). The median values of metal concentrations in fresh muscle tissue of 11 fish species varied as follows: Al < 0.5-60; Ba < 0.05-0.31; Ca 120-1800; Cd < 0.05-0.096; Co < 0.10; Cr < 0.10-0.50; Cu < 0.15-0.77; Fe 1.5-21; Hg 0.0058-0.65; K 1800-4200; Mg 130-560; Mn 0.12-0.59; Na 350-840; Ni < 0.2-0.31; Pb < 0.75; Sr 0.079-2.9; Zn 3.3-23 μg/g fresh weight. The Target Hazard Quotient (THQ) values calculated in this study for Cd and Hg from muscles of fish species collected from Vistula River were low in the range of 0.4 for Hg and 0.8 for Cd.     

Estimation of K(OA) values of 209 polychlorinated trans-azobenzenes by PM6 and DFT methods

The octanol-air partition coefficients (K(OA)) of all 209 PCt-ABs were determined computationally to fill gaps on their environmentally relevant physical and chemical properties. These properties have been determined using two computational approaches: the semi-empirical quantum chemistry method for property parameterization (PM6) of the molecular orbital package (MOPAC) and density functional theory (DFT) method using B3LYP functional and 6-311++G** basis set in Gaussian 03 software and artificial neural network (ANN) predicting abilities. Both computational methods enabled estimation of log K(OA) partition coefficients of PCt-ABs with a similar accuracy and precision. The PM6 method compared to DFT was highly superior because it requires much less time, manpower and cost of hardware. The determined log K(OA) values of the investigated PCt-ABs for standard condition (25 °C) varied between 8.30 and 8.75 for Mono-; 8.71 and 9.92 for Di-; 9.58 and 10.72 for Tri-; 10.11 and 11.34 for Tetra-, 10.83 and 11.85 for Penta-; 11.24 and 12.36 for Hexa-; 11.87 and 12.66 for Hepta-; 12.31 and 12.97 for Octa-; 12.89 and 13.21 for Nona-Ct-ABs; and 13.17- and 13.49 for Deca-Ct-AB. PCt-ABs, in view of these log K(OA) values, can be classified as compounds of relatively low (Mono-, Di- and some of Tri- Ct-ABs with values of log K(OA) around 8 to 10) environmental mobility (most of Tri- to Nona-Ct-ABs and Deca-Ct-AB homologues with values of log K(OA) >10), and with a potential to be adsorbed by soil particles.     

Mercury in European Blushers, Amanita rubescens, mushrooms and topsoils: bioconcentration potential and intake assessment

Total mercury content has been determined in fruiting bodies of European Blushers and topsoils collected from 11 sites across Poland in 2006-2008. Mercury analysis was carried out using a validated analytical method and cold-vapour atomic absorption (CV-AAS). The European Blusher effectively accumulated mercury in fruiting bodies. The mean values of total mercury in caps of European Blushers from background (uncontaminated) areas were from 0.22 to 1.0 (0.067-3.2) and in stipes from 0.16 to 0.65 (0.071-2.7) μg/g dry weight. In topsoil beneath to fruiting bodies, the median Hg concentration at 10 sites in Northern Poland varied between 0.030 and 0.072 (0.0096-0.19) μg/g dw, and in one site in Southern Poland was 0.20 (0.079-0.34) μg/g dw. Data on Hg in European Blushers from different countries were reviewed. The mean concentrations of total Hg in caps of European Blushers from two "pristine" sites in northern part of Poland were ～1.0 μg/g dw. A meal made with 300-500 g of fresh caps of European Blushers collected at such sites (assuming 90% water content in caps) can result in Hg intake of 0.0003-0.0005 mg Hg/kg bm (assuming a 60 kg bm), which is a dose equipotent to a new provisional tolerable weekly intake (PTWI) value set for inorganic Hg.     

Survey on composition and bioconcentration potential of 12 metallic elements in King Bolete (Boletus edulis) mushroom that emerged at 11 spatially distant sites

This paper provides data on baseline concentrations, interrelationships and bioconcentration potential of 12 metallic elements by King Bolete collected from 11 spatially distant sites across Poland. There are significant differences in concentrations of metals (Al, Ba, Ca, Cd, Cu, Fe, K, Mg, Mn, Na, Sr, Zn) and their bioconcentration potential in King Bolete Boletus edulis at 11 spatially distant sites surveyed across Poland. These have resulted from significant geographical differences in trace metal concentrations in a layer (0-10 cm) of organic and mineral soil underneath to fruiting bodies and possible local bioavailabilities of macro- (Ca, K, Mg, Na) and trace metals (Al, Ba, Cd, Cu, Fe, Mn, Sr, Zn) to King Bolete. The use of highly appreciated wild-grown edible King Bolete mushroom has established a baseline measure of regional minerals status, heavy metals pollution and assessment of intake rates for wild mushroom dish fanciers against which future changes can be compared. Data on Cd, Cu and Zn from this study and from literature search can be useful to set the maximum limit of these metals in King Bolete collected from uncontaminated (background) areas. In this report also reviewed are data on Al, Ba, Ca, Cd, Cu, Fe, K, Mg, Mn, Na, Sr and Zn accumulation in King Bolete.     

The content of butyl- and phenyltin derivatives in the sediment from the Port of Gdansk

Harbor sediments containing large deposits of organotin compounds constitute a potential threat to the marine environment. Samples of harbor sediments were collected twice in the years 2003 and 2005 from the following locations: Zió?kowskiego, Siarkowe, Wi?lane, Weglowe, Chemików and Paliw P?ynnych Quays. The cores of 25cm length sliced into 2- and 5-cm segments were analyzed. After drying and homogenization, samples were split into two granulometric fractions, i.e. <2.00 and <0.063mm. The dominant fraction in whole sediment, i.e. fraction grain diameter <2.00mm, was sand (grain diameter 2.00-0.063mm). However, the highest concentrations of butyltin (BT) and phenyltin (PT) compounds were found in the fine sediment fraction. The mean values of tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) in the analyzed samples in the <2.00mm fraction were 2144.9, 434.7 and 148.1ngSng(-1)d.w., respectively, while the corresponding mean values in the <0.063mm fraction were 6556.4, 1593.7 and 450.0ngSng(-1)d.w. The mean concentrations of monophenyltin (MPhT) have been estimated at 29.0 and 49.9ngSng(-1)d.w. for the <2.00 and <0.063mm fraction sizes, respectively. The estimated content levels of diphenyltin (DPhT) and triphenyltin (TPhT) were in most cases below the detection limit of the applied method. The sediment cores collected from the locations characterized by high industrialization and intense exploitation (Wi?lane, Weglowe Quays) contained the highest concentrations of BT and PT.     

Sediment Quality Assessment in the Gulf of Gdańsk (Baltic Sea) Using Complementary Lines of Evidence

Sediments from Polish coastal environments were classified by a quality assessment approach that took into account trace metal and organic micropollutant concentrations, grain-size distribution, and organic carbon content. Generally, no benthic organisms were found at sites where sediments were classified as heavily polluted. However, areas characterized by a moderate contamination showed a variable composition of the benthic community and changing bioaccumulation patterns; therefore, no single species found in the Gulf of Gdańsk could be considered representative of the whole benthic environment. Although sediment monitoring must be considered a suitable tool to detect hot-spot pollution areas in coastal and inland waters, it should be complemented by bioaccumulation measurements to evaluate the actual risk posed by contaminants to benthic organisms. This “biological information” allows a better appreciation of the real benthic infaunal community exposure to chemicals and can usefully complement the existing sediment quality guidelines.     

Biodegradation and sorption of nodularin (NOD) in fine-grained sediments

Nodularin (NOD) is a cyclic pentapeptide hepatotoxin produced by the bloom forming cyanobacterium Nodularia spumigena. The fate of the toxin in the aquatic environment has not been fully evaluated. In the current study the changes in NOD concentration caused by biodegradation and sorption in samples from the Baltic were studied. Seawater of various salinities (0, 4, 8 and 12 PSU) and three forms of fine-grained sediment (sterile wet sediment, non-sterile wet sediment, and combusted sterile sediment) were incubated with 34.7 μg of NOD. The toxin was seen to be highly stable both in sterile and non-sterile seawater. During the 21-day experiment NOD concentrations in solutions overlying the combusted sediment and the sterile wet sediment were reduced to 12.5 ± 2.6% and 59.8 ± 2.4% of the initial value. The greatest loss of the toxin (up to 100%) was observed in the non-sterile seawater incubated with non-sterile wet sediment. These results indicate an important role of benthic microbial community in nodularin removal. Two biodegradation products with similar spectral characteristics to NOD were detected; one of which was identified as Adda amino acid.     

Geochemical position of Pb,Zn and Cd in soils near the Olkusz mine/smelter,South Poland: effects of land use,type of contamination and distance from pollution source

The soils adjacent to an area of historical mining, ore processing and smelting activities reflects the historical background and a mixing of recent contamination sources. The main anthropogenic sources of metals can be connected with historical and recent mine wastes, direct atmospheric deposition from mining and smelting processes and dust particles originating from open tailings ponds. Contaminated agriculture and forest soil samples with mining and smelting related pollutants were collected at different distances from the source of emission in the Pb–Zn–Ag mining area near Olkusz, Upper Silesia to (a) compare the chemical speciation of metals in agriculture and forest soils situated at the same distance from the point source of pollution (paired sampling design), (b) to evaluate the relationship between the distance from the polluter and the retention of the metals in the soil, (c) to describe mineralogy transformation of anthropogenic soil particles in the soils, and (d) to assess the effect of deposited fly ash vs. dumped mining/smelting waste on the mobility and bioavailability of metals in the soil. Forest soils are much more affected with smelting processes than agriculture soils. However, agriculture soils suffer from the downward metal migration more than the forest soils. The maximum concentrations of Pb, Zn, and Cd were detected in a forest soil profile near the smelter and reached about 25 g kg^− 1, 20 g kg^− 1 and 200 mg kg^− 1 for Pb, Zn and Cd, respectively. The metal pollutants from smelting processes are less stable under slightly alkaline soil pH then acidic due to the metal carbonates precipitation. Metal mobility ranges in the studied forest soils are as follows: Pb > Zn ≈ Cd for relatively circum-neutral soil pH (near the smelter), Cd > Zn > Pb for acidic soils (further from the smelter). Under relatively comparable pH conditions, the main soil properties influencing metal migration are total organic carbon and cation exchange capacity. The mobilization of Pb, Zn and Cd in soils depends on the persistence of the metal-containing particles in the atmosphere; the longer the time, the more abundant the stable forms. The dumped mining/smelting waste is less risk of easily mobilizable metal forms, however, downward metal migration especially due to the periodical leaching of the waste was observed.     

A Draft of a System of Teaching Occupational Safety and Ergonomics at Universities in Poland

The aim of the study was to develop a set of curricula for teaching Occupational Safety and Ergonomics at colleges and universities of various types, aimed at equipping students with knowledge and skills and at shaping active attitudes towards the practical application of the acquired knowledge in their future working lives. On the basis of the analysis of the curricula at Polish and foreign colleges and universities, a set (canon) of educational contents constituting a common practice in the academic teaching of Occupational Safety and Ergonomics was established. Then, a convenient for teaching this subject classification of university specialisations in Poland was introduced. This led to identifying and defining a taxonomic unit called here an educational profile. Next, curriculum minima for the developed profiles were defined objectively. To achieve this aim, the set of educational contents was ranked by university teachers and specialists in occupational safety and ergonomics. Each part of the educational contents (subject) was ranked on a 10-point scale in relation to each educational profile. The results of this ranking led to formulating sets of educational contents for each educational profile. On this basis, a repertoire of curricula (6 curricula, in 2 hour-by-hour versions each) was prepared, with methodological guidelines for lecturers. The results of the study were presented in the form of a manual for academic authorities.