Evaluating the effectiveness of fingerling stocking and ecological perspectives in enhancing fish harvest in a large tropical reservoir of Northern India

Environment, Development and Sustainability - The present study evaluated the effectiveness of stocking the Gangetic carps, viz. Labeo catla, Labeo rohita, and Cirrhinus mrigala, in a large...     

A holistic study on geothermal and solar water desalination system for sustainable development

Environmental Science and Pollution Research - This paper shows the comparison of the various conventional technologies used for desalination and the advantages of using renewable energy such as...     

Solvent tolerant marine bacterium Bacillus aquimaris secreting organic solvent stable alkaline cellulase

The organic solvent tolerant bacteria with their physiological abilities to decontaminate the organic pollutants have potentials to secrete extracellular enzymes of commercial importance. Of the 19 marine bacterial isolates examined for their solvent tolerance at 10 vol.% concentration, one had the significant tolerance and showed a relative growth yield of 86% for acetone, 71% for methanol, 52% for benzene, 35% for heptane, 24% for toluene and 19% for ethylacetate. The phylogenetic analysis of this strain using 16S rDNA sequence revealed 99% homology with Bacillus aquimaris. The cellulase enzyme secreted by this strain under normal conditions showed an optimum activity at pH 11 and 45 °C. The enzyme did show functional stability even at higher pH (12) and temperature (75 °C) with residual activity of 85% and 95% respectively. The enzyme activity in the presence of different additives were in the following order: Co⁺² > Fe⁺² > NaOCl₂ > CuSO₄ > KCl > NaCl. The enzyme stability in the presence of solvents at 20 vol.% concentration was highest in benzene with 122% followed by methanol (85%), acetone (75%), toluene (73%) and heptane (42%). The pre-incubation of enzyme in ionic liquids such as 1-ethyl-3-methylimidazolium methanesulfonate and 1-ethyl-3-methylimidazolium bromide increased its activity to 150% and 155% respectively. The change in fatty acid profile with different solvents further elucidated the physiological adaptations of the strain to tolerate such extreme conditions.     

Determination of hypoxia and dietary copper mediated sub-lethal toxicity in carp, Cyprinus carpio, at different levels of biological organisation

Hypoxic events frequently occur in the aquatic environment in association with micro pollutants, including heavy metals. Only a few studies are however available on the uptake and biological responses of heavy metals under hypoxic conditions. To elucidate the phenomenon, mirror carp Cyprinus carpio L. (16.13-16.22 g) were exposed chronically to dietary copper (Cu; 250 and 500 mg kg dry wt.⁻¹) for 30 d under normoxic (8.25 mg O₂ L⁻¹) and hypoxic (∼3 mg O₂ L⁻¹) conditions and adopting an integrated approach, sub-lethal biomarker responses were determined at different levels of biological organisation. Level of oxidative DNA damage (as determined by modified Comet assay) showed strong significant difference following exposure to dietary Cu level under normoxic (1.6-fold) as well as under hypoxic condition at both Cu levels (2.1 and 2.5-folds respectively). Significant difference was also observed for haematological parameters (i.e. increased red and white blood cells, haematocrit value and haemoglobin concentration). Quantitative histology revealed alterations in tissues (i.e. liver and gills) for hypoxic and all dietary Cu treatment groups under both normoxic and hypoxic conditions suggesting a compensatory response to these organs (p < 0.05). The order of Cu accumulation in tissues (as determined by ICP-OES) was liver > intestine > kidney > gill. Interestingly, SGR under both normoxic and hypoxic conditions reduced with elevating Cu levels (p = 0.019). Overall, the results provide evidence for enhanced toxicological responses in fish following exposure to Cu either alone or in combination with hypoxic condition and lends support to the evolving viewpoint that many water quality guidelines should be revisited in terms of new ecotoxicological criteria.     

Intake of ²³⁸U and ²³²Th through the consumption of foodstuffs by tribal populations practicing slash and burn agriculture in an extremely high rainfall area

The concentration of naturally occurring radionuclides ²³²Th, ²³⁸U was determined using Instrumental Neutron Activation Analysis (INAA) in different food groups namely cereals, vegetables, leafy vegetables, roots and tubers cultivated and consumed by tribal population residing around the proposed uranium mine. The study area is a part of rural area K. P. Mawthabah (Domiasiat) in the west Khasi Hills District of Meghalaya, India located in the tropical region of high rainfall that remains steeped in tribal tradition without much outside influence. Agriculture by Jhum (slash and burn) cultivation and animal husbandry are the main occupation of the tribal populations. A total of 89 samples from locally grown food products were analyzed. The concentration of ²³⁸U and ²³²Th in the soil of the study area was found to vary 1.6-15.5 and 2.0-5.0 times respectively to the average mean value observed in India. The estimated daily dietary intake of ²³⁸U and ²³²Th were 2.0 μg d⁻¹ (25 mBq d⁻¹) and 3.4 μg d⁻¹ (14 mBq d⁻¹) is comparable with reported range 0.5-5.0 μg d⁻¹ and 0.15-3.5 μg d⁻¹ respectively for the Asian population.     

Decadal time-scale monitoring of forest fires in Similipal Biosphere Reserve,India using remote sensing and GIS

Analyzing the spatial extent and distribution of forest fires is essential for sustainable forest resource management. There is no comprehensive data existing on forest fires on a regular basis in Biosphere Reserves of India. The present work have been carried out to locate and estimate the spatial extent of forest burnt areas using Resourcesat-1 data and fire frequency covering decadal fire events (2004–2013) in Similipal Biosphere Reserve. The anomalous quantity of forest burnt area was recorded during 2009 as 1,014.7 km². There was inconsistency in the fire susceptibility across the different vegetation types. The spatial analysis of burnt area shows that an area of 34.2 % of dry deciduous forests, followed by tree savannah, shrub savannah, and grasslands affected by fires in 2013. The analysis based on decadal time scale satellite data reveals that an area of 2,175.9 km² (59.6 % of total vegetation cover) has been affected by varied rate of frequency of forest fires. Fire density pattern indicates low count of burnt area patches in 2013 estimated at 1,017 and high count at 1,916 in 2004. An estimate of fire risk area over a decade identifies 12.2 km² is experiencing an annual fire damage. Summing the fire frequency data across the grids (each 1 km²) indicates 1,211 (26 %) grids are having very high disturbance regimes due to repeated fires in all the 10 years, followed by 711 grids in 9 years and 418 in 8 years and 382 in 7 years. The spatial database offers excellent opportunities to understand the ecological impact of fires on biodiversity and is helpful in formulating conservation action plans.     

Water quality assessment of Majhiaon block of Garwa district in Jharkhand with special focus on fluoride analysis

Fluoride in groundwater is known to contaminate the water sources globally. Jharkhand, one of the states in the eastern part of India, is known to have excessive fluoride content in groundwater sources. The present work involves assessment of water quality with special reference to fluoride in Majhiaon block of Garwa district in Jharkhand. Iron, nitrate and arsenic were also tested for the water samples collected from site. Eight hundred forty samples were tested for fluoride on site using colourimetry method, and one tenth of the samples were brought to laboratory for iron, nitrate, arsenic and fluoride analysis. Results show that 402 samples were having fluoride above permissible limit. Iron and nitrate were found to be beyond permissible limits in 302 and 286 water samples, respectively. More than 50% of samples collected from school had fluoride levels above permissible limits. Arsenic was well within the limits. However, few samples shown were excessive of iron and nitrate.     

A comprehensive physico-chemical, mineralogical and morphological characterization of Indian mineral wastes

This paper provides a comprehensive characterization of mineral waste such as fly ash, bottom ash, slag and construction demolition (C&D) collected from four different thermal power plants, three steel plants and three C&D waste generation sites in India. To determine utilisation potential and environmental concerns, as received fly ash, bottom ash, slag and C&D waste were analysed for physico-chemical, mineralogical and morphological properties. The physico-chemical properties analysed include pH, moisture content, acid insoluble residue, loss on ignition(LOI), carbon content, fineness, chloride content, sulphate content, reactive silica content, XRF and heavy metal analysis. Morphological and mineralogical characteristics were investigated using scanning electron microscopy–energy dispersive X-ray. Particle size distribution was obtained using particle size analyser. The material analysed has different compositions and were selected with a view to determine their suitability for different applications in cement and concrete industry and for further research studies.