Chemical characteristics of fine particulate matters measured during severe winter haze events in Ulaanbaatar,Mongolia

In order to investigate the chemical characteristics of atmospheric aerosol measured during a severe winter haze event, 12-hr PM_2.5 (particulate matter with an aerodynamic diameter ≤2.5 μm) samples were collected at an urban site in Ulaanbaatar, Mongolia, from January 9 to February 17, 2008. On average, 12-hr PM_2.5 mass concentration was 105.1 ± 34.9 μg/m³. Low PM_2.5 mass concentrations were measured when low pressure developed over central Mongolia. The 12-hr average organic mass by carbon (OMC) varied from 6.4 to 132.3 μg/m³, with a mean of 54.9 ± 25.4 μg/m³, whereas elemental carbon (EC) concentration ranged from 0.1 to 3.6 μgC/m³, with a mean of 1.5 ± 0.8 μgC/m³. Ammonium sulfate was found to be the most abundant water-soluble ionic component in Ulaanbaatar during the sampling period, with an average concentration of 11.3 ± 5.0 μg/m³. In order to characterize the effect of air mass pathway on fine particulate matter characteristics, 5-day back-trajectory analysis was conducted, using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model. The haze level was classified into three categories, based on the 5-day air mass back trajectories, as Stagnant (ST), Continental (CT), and Low Pressure (LP) cases. PM_2.5 mass concentration during the Stagnant condition was approximately 2.5 times higher than that during the Low Pressure condition, mainly due to increased pollutant concentration of OMC and secondary ammonium sulfate.

Implications: Mongolia is experiencing rapid rates of urbanization similar to other Asian countries, resulting in air pollution problems by the growing number of automobiles and industrialization. Ulaanbaatar, capital of Mongolia, is inherently vulnerable to air pollution because of its emission sources, topography, and meteorological characteristics. Very limited measurements on chemical characteristics of particulate matter have been carried out in Ulaanbaatar, Mongolia.     

Future year ozone source attribution modeling study using CMAQ-ISAM

ABSTRACT

To achieve the current United States National Ambient Air Quality Standards (NAAQS) attainment level for ozone or particulate matter, current photochemical air quality models include tools to determine source apportionment and/or source sensitivity. Previous studies by the authors have used the Ozone and Particulate Matter Source Apportionment Technology and Higher-order Decoupled Direct Method probing tools in CAMx to investigate these source-receptor relationships for ozone. The recently available source apportionment for CMAQ, referred to as the Integrated Source Apportionment Method (ISAM), was used in this study to conduct future year (2030) source attribution modeling. The CMAQ-ISAM ozone source attribution results for selected cities across the U.S. showed boundary conditions were the dominant contributor to the future year highest July maximum daily 8-hour average (MDA8) ozone concentrations. Point sources were generally larger contributors in the eastern U.S. than in the western U.S. The contributions of on-road mobile emissions were around 5 ppb at most of the cities selected for analysis. Off-road mobile source contributions were around 20 ppb or nearly 30%. Since boundary conditions play an important role in future year ozone levels, it is important to characterize future year boundary conditions accurately. The current implementation of ISAM in CMAQ 5.0.2 requires significant computing resources for ozone source attribution, making it difficult to conduct long-term simulations for large domains. The computing requirements for PM source attribution are even more onerous. CMAQ 5.2 was released after this study was completed, and does not include ISAM. If an efficient version of ISAM becomes available, it could be used in long-term ozone and PM2.5 studies. Implications: Ozone source attribution results provide useful information on important emission source contribution categories and provide some initial guidance on future emission reduction strategies. This study explains a new source apportionment technique, CMAQ-ISAM, and compares it to CAMx OSAT. The techniques have similar results: ozone’s highest source contributor is boundary conditions, followed by point sources, then off-road mobile sources. The current version of ISAM in CMAQ 5.0.2 requires significant computing resources for ozone source attribution, while the computing requirements for PM source attribution are even more onerous. CMAQ 5.2 was released after this study was completed, and does not include ISAM.     

Ozonation catalyzed by homogeneous and heterogeneous catalysts for degradation of DEHP in aqueous phase

Di-(2-ethyl hexyl) phthalate (DEHP), a recalcitrant and an endocrine disrupting chemical, was studied for its removal from wastewater by advanced oxidation process. The effects of pH, transition metal ions, and granular activated carbon (GAC) were investigated. Removal of DEHP increased with increase in pH and among metal ions Cr(III) was found to be the most active catalyst to remove DEHP. In the case of GAC, original carbon (G0) and GAC pre-ozonated in gas phase for 10 min (G10) were tested as catalysts in catalytic ozonation and found G0 to be more active than G10. This is because, during pre-ozonation, basic groups like chromene, pyrones and also graphene layers were oxidized to acidic surface oxygen groups. These basic surface groups are reported to be active catalytic centres for ozone decomposition into .OH which is a strong oxidant. According to kinetic manipulations, DEHP degradation rate constant due to .OH was affected by the catalyst while that due to direct ozonation is same in all cases with or without catalyst. G0 was doped with chromia gels (G0/CrA) to combine the benefits of homogeneous and heterogeneous catalysis. G0/CrA showed lower catalytic efficiency than that of only G0. This might be because of changes in surface structure of GAC caused by doping of chromia gel and changes in chemical nature of Cr(III) during formation of gel. A good correlation was found between the rate constants of ozone decay and DEHP degradation (R2=0.96). This correlation confirms that ozone decomposition into .OH is a critical factor for the activity of a catalyst during ozonation.     

Wastewater treatment plants (WWTPs) as a source of sediment contamination by toxic organic pollutants and fecal sterols in a semi-enclosed bay in Korea

Toxic organic contaminants and a macrobenthic community were assayed in sediments collected near a wastewater treatment plant (WWTP) outfall to assess the impact of WWTP discharges on an aquatic environment. Average concentrations of toxic organic contaminants in sediments from 20 locations were 96.7ng TEQ/kg dry matter for PCDD/Fs, 1.84ng TEQ/kg dry matter for dioxin-like PCBs, 29.1microg/kg dry matter for PBDEs, 411microg/kg dry matter for nonylphenols, 1021microg/kg dry matter for fecal sterols, and 928microg/kg dry matter for PAHs. Concentrations of all the organic contaminants and fecal sterols varied widely and there was a clear decrease in concentration gradients with increasing distances from the WWTP outfall. This result suggests that WWTP activities contribute to contamination by organic chemicals. A survey of benthic organisms showed the dominance of a few polychaete species, indicating a deterioration of the macrobenthic community by the WWTP discharge. Non-parametric multidimensional scaling (MDS) ordination and Spearman correlation analyses showed that organic contamination is associated with the benthic community structure. For polychaete species, the sensitive species for organic contaminants was Paraprionospio pinnata, while contaminant-tolerant species were Spiochaetopterus koreana and Capitella capitata. BIOENV analyses of all locations suggested PCDDs and PCDFs as the major contaminants influencing the structure of the macrobenthic community. The present study highlights that continuous WWTP discharges contribute to severe organic contamination and risks for the benthic community in an aquatic ecosystem.     

Accelerating preliminary eco-innovation design for products that integrates case-based reasoning and TRIZ method

While the innovativeness and market potential of a new product is normally emphasized, its environmental impact is often neglected. Despite their ability to help designers reduce the environmental impact of products throughout their life cycle, many eco-design methods focus on the redesign of existing products, necessitating a more innovative design capacity. This work describes a novel model to accelerate the preliminary eco-innovation product design by integrating the advantages of case-based reasoning and the TRIZ method. Previous cases from a database support a novel design to satisfy functional performances under the CBR framework. The innovative principles and evolution patterns of the TRIZ method can enhance the design level of new products to achieve eco-innovation. Four eco-innovation concepts for a PC mouse demonstrate the effectiveness of the proposed model.     

Oil spreading in instantaneous and continuous spills on rotating earth

The effect of the Coriolis force on the oil spill spreading in the gravity-viscous regime is examined. A new shallow water model for the transport and spreading of oil slick of arbitrary shape is described in which the Coriolis force is included in the momentum equations and the oil–water friction is parameterized in a frame of the boundary layer theory including the Ekman friction. The numerical Lagrangian method based on smoothed particle dynamics is described. New similarity solutions of the model equations are obtained for unidirectional and axisymmetric spreading in gravity-viscous, gravity-turbulent and gravity-viscous-rotational regimes for instantaneous as well as continuous releases. The numerical simulation extends these results for the case of continuous release in the presence of currents. It was shown that Coriolis term in the momentum equation can be omitted if slick thickness is much less of the laminar Ekman layer thickness. However, the Ekman friction should be retained for slicks of any thickness for larger times. The Ekman friction results in the essential slowdown of the spreading as well as in the deflection of the oil spreading velocity at 45° from the direction of velocity in the non-rotation case. Numerical simulations of large-scale spills showed that after the 2?days the slick area with the Coriolis effect was approximately less than half of that without rotation. Therefore, the earth rotation can be also important in the oil weathering.     

Toxicity of atrazine and its bioaccumulation and biodegradation in a green microalga,Chlamydomonas mexicana

This study evaluated the toxicity of herbicide atrazine, along with its bioaccumulation and biodegradation in the green microalga Chlamydomonas mexicana. At low concentration (10 μg L^?1), atrazine had no profound effect on the microalga, while higher concentrations (25, 50, and 100 μg L^?1) imposed toxicity, leading to inhibition of cell growth and chlorophyll a accumulation by 22 %, 33 %, and 36 %, and 13 %, 24 %, and 27 %, respectively. Atrazine 96-h EC50 for C. mexicana was estimated to be 33 μg L^?1. Microalga showed a capability to accumulate atrazine in the cell and to biodegrade the cell-accumulated atrazine resulting in 14–36 % atrazine degradation at 10–100 μg L^?1. Increasing atrazine concentration decreased the total fatty acids (from 102 to 75 mg g^?1) and increased the unsaturated fatty acid content in the microalga. Carbohydrate content increased gradually with the increase in atrazine concentration up to 15 %. This study shows that C. mexicana has the capability to degrade atrazine and can be employed for the remediation of atrazine-contaminated streams.     

Metal distribution in incineration residues of municipal solid waste (MSW) in Japan

This study aimed to identify distribution of metals and the influential factors on metal concentrations in incineration residues. Bottom ash and fly ash were sampled from 19 stoker and seven fluidized bed incinerators, which were selected to have a variety of furnace capacity, furnace temperature, and input waste. In the results, shredded bulky waste in input waste increased the concentration of some metals, such as Cd and Pb, and the effect was confirmed by analysis of shredded bulky waste. During MSW incineration, lithophilic metals such as Fe, Cu, Cr, and Al remained mainly in the bottom ash while Cd volatilized from the furnace and condensed to the fly ash. About two thirds of Pb and Zn was found in the bottom ash despite their high volatility. Finally, based on the results obtained in this study, the amount of metal in incineration residues of MSW was calculated and the loss of metal was estimated in terms of mass and money. A considerable amount of metal was found to be lost as waste material by landfilling of incineration residues.     

EPR characterization of the catalytic activity of clays for PCE removal by gamma-radiation induced by acid and thermal treatments

Clays from tidal flat sediments showed efficient catalytic activity in the decomposition of PCE by gamma-radiation. The highest PCE removal of 98.6% was obtained with clays heated to 700 degrees C after acid treatment. The improved catalytic activity was identified by electron paramagnetic resonance (EPR) spectroscopy. The EPR spectra of clays were significantly changed by the acid and thermal treatments. The intensity of a narrow signal at g=2 (signal III) was decreased with increasing thermal treatment temperature and this increased the PCE removal efficiency. The acid treatment completely removed a broad signal at g=2 (signal II), decreased the intensity of signal III, and improved the gamma-radiation treatment of PCE.