沸石负载淀粉对Pb2＋、Cu2＋和Ni2＋的吸附性能

将淀粉负载到沸石表面得到新型重金属离子复合吸附剂ZLS。分别从沸石与淀粉质量比、吸附温度、吸附时间、pH与重金属初始浓度不同方面考察了复合吸附剂ZLS吸附Pb^2＋、Cu^2＋、Ni^2＋的影响。实验结果表明：当沸石与淀粉质量比为10：1,pH为6,吸附温度在30℃时,复合型吸附剂ZLS对Pb^2＋、Cu^2＋和Ni^2＋3种重金属离子的吸附效果最好;吸附动力学研究发现,ZLS对Pb^2＋、Cu^2＋和Ni^2＋的吸附行为均符合准二级动力学以及颗粒内部扩散模型;等温吸附数据符合Fre-undlich模型,吸附状态属于多层吸附。     

碘掺杂TiO2可见光光催化性能研究

在低于100℃温度条件下,采用溶胶-凝胶法以钛酸正丁酯为钛源,碘酸钾为碘源,制备了I掺杂纳米TiO2催化剂(I-TiO2),运用X-射线衍射(XRD)、透射电镜(TEM)及X-射线光电子能谱(XPS)等对催化剂进行表征,结果表明,TiO2及I-TiO2催化剂均为锐钛矿,I吸附并包裹在TiO2表面或以间隙进入的形式存在,并未进入TiO2晶格。通过在可见光照射下(λ>420 nm)以罗丹明B(Rhodamine B,RhB)的光催化降解为探针反应研究了在不同条件下制备催化剂的催化性能,结果表明,掺杂比为nI:nTi=0.05∶1,焙烧温度为400℃,降解介质条件pH=7时,I-TiO2光催化活性明显优于未掺杂的TiO2。光催化降解过程通过红外光谱(IR),总有机碳(TOC)跟踪测定,比较了TiO2掺杂前后降解RhB和对氯苯酚(4-CP)的光催化特性差异;同时采用苯甲酸荧光光度法跟踪测定体系中的氧化物种,表明在可见光下,I-TiO2光催化体系中产生.OH高活性氧化物种从而氧化降解目标化合物。     

电增强载铝活性炭纤维吸附除氟的效果与影响因素

以含氟地下水为研究对象,采用自制电促吸附除氟反应器,开展电增强载铝活性炭纤维吸附除氟的动态实验,研究了不同电压、极板间距、地下水碱度和流速对吸附除氟效果的影响。实验结果表明,在负载炭纤维毡的电极一端加正电,可以提高除氟效果。当电压为1.6 V时除氟效果较好,单位面积炭毡处理达标水量为56.7 L/m2;极板间距设置为4mm时电吸附反应器除氟效果最佳;通过调节pH改变地下水碱度,当地下水pH调节为5.5时,电吸附反应器除氟效果较未调节前提高50%;当采用3对电极板,流速为1.88 m/h时,达到最高表面处理负荷2 073.6 L/(m2.d);探究了反应器的反洗再生方式,并连续进行了吸附再生的动态实验;穿透的反应器以Al2(SO4)3溶液为再生液并采用反向加电1.6 V的方式,可以达到较好的再生效果,实现连续动态运行。     

湿污泥在流化床中干燥特性

在鼓泡流化床干燥器内,床料采用0～1 mm的石英砂,以热空气作为干燥介质,对城市污水污泥的流态化干燥特性进行实验研究。通过控制送风温度、流化风量、加料量、污泥粒径等参数,研究在不同工况条件下床温以及干污泥含水率的变化情况。结果表明,随着送风温度的升高,床温升高,干污泥含水率下降,最终趋向于一个稳定值8%。床温随流化风量的增加先是减小而后升高,干污泥的含水率随流化风量的增加先是降低而后增大。当加料量从11 kg/h增加到13kg/h时,干污泥的含水率基本没有变化,当加料量超过13 kg/h时,干污泥的含水率从8.1%开始呈递增趋势。随污泥粒径的增大,床温升高,干污泥含水率也随之升高。     

Influence of ciprofloxacin on the microbial catabolic diversity in soil

In this study, the effect of ciprofloxacin (CIP) on the catabolic diversity of soil microbial communities was evaluated. Soil samples were spiked with ciprofloxacin (0, 1, 5 and 50 mg?kg^?1) and were incubated for 1, 3, 9, 22 and 40 days. Untreated controls received only water. The functional diversity of the microbial community studied was characterized using a catabolic response profile (CRP). Six substrate groups were tested: carbohydrates, amino acids, carboxylic acids, aromatic chemicals, alcohols and polymers. After 40 days, the CIP concentrations in the soil samples ranged from 25% to 58% of the initial concentrations. Soil respiratory responses to the individual substrates D-glucose, lactose, D-mannose, L-glutamic, Na-citrate, malic acid and inosine were inhibited at the high CIP concentrations (5 and 50 mg·kg^?1) in the soils and were increased at the lowest CIP concentration (1 mg·kg^?1). Soil respiration was inhibited at all of the CIP concentrations after the addition of D-galactose and glycerol. The CIP concentration and incubation time explained 45.3% of the variance of the catabolic responses. The CRP analysis clearly discriminated among the different CIP concentrations. The results suggest that CIP strongly affects the catabolic diversities of soil microbial communities and that its effect is more significant than that of incubation time.     

基于GA-BP算法的含油污泥处理 工艺参数优化

在含油污泥进行资源化处理过程中,针对处理目标受多个因素影响的实际,为了解决工艺之间的耦合问题,采用正交实验的方法来解决,并把主要参数作为优化对象,把含油污泥的脱水率作为评价目标,通过采用GA-BP算法对含油污泥耦合工艺正交实验参数进行了线性与非线性分析.在采用遗传算法优化神经网络的权值和阈值的基础上,用优化后的权值和阈值对测试样本和训练样本进行了预测.预测结果表明,预测误差都有明显减小,分别由0.34211减少到0.031549和0.15476减少到0.040682,可见耦合参数趋向于非线性优化.     

铝电解废旧阴极盐酸浸出动力学分析

以铝电解槽废旧阴极为研究对象,针对两步浸出法工艺,用收缩核模型研究了碱浸出后的废旧阴极内衬固体用HCl溶液浸出NaAl11O17动力学。考察了粒径大小、不同温度和搅拌速度对浸出率的影响,并建立了反应的动力学方程。结果表明,该浸出反应的控制环节为内扩散,反应表观活化能为18.26 kJ/mol。生产中最佳工艺条件为:浸出温度85℃、搅拌速度600 r/min、粒径0.075 mm。该工作为铝电解槽废旧阴极内衬规模化利用打下了坚实的基础。     

兰炭废水中酚类物质萃取及回收效果

为了去除并回收兰炭废水中的高浓度挥发酚类物质,实验研究了甲基异丁酮溶剂在不同条件下对兰炭废水中挥发酚的萃取及回收效果。结果表明,萃取时间为10 min,温度为35℃,p H低于8.0,萃取体积比(萃取剂体积/兰炭废水体积)在大于1∶5时,经过萃取后废水中挥发酚浓度由6 385 mg/L降至230 mg/L,去除率高达96.4%,有效减轻了后续生化处理的负担。而萃取剂经过蒸馏分离后,挥发酚的回收率可达95%以上,甲基异丁酮的损耗率为0.18%~0.2%。实验表明,甲基异丁酮是一种可以长期循环使用的工业萃取剂,显示了良好的应用前景。     

Optimal heat rejection pressure for transcritical CO2 refrigeration cycle with an expander

Heat rejection pressure plays an important role in designing a transcritical CO₂ refrigeration system, and it has an optimal value to maximize the system’s coefficient of performance (COP). With a thermodynamic simulation model, the optimal heat rejection pressure is studied in the paper for an expander cycle, as well as conventional throttle valve cycle. The effects of compressor efficiency, expander efficiency, gas cooler outlet temperature, and evaporation temperature on the optimal heat rejection pressure are analyzed. It is the first time for a transcritical CO₂ expander cycle that the optimal heat rejection pressure is correlated with the gas cooler outlet temperature and the evaporation temperature at given compressor efficiency and expander efficiency. The average deviation from the correlation to simulation results is less than 1.0%. The correlation provides a guideline to system development and performance optimization of a transcritical CO₂ expander cycle.     

两相厌氧工艺处理高浓度丙烯酸生产废水

利用两相厌氧工艺处理高浓度丙烯酸生产废水。实验结果表明：在较高进水COD和容积负荷的条件下,系统具有良好、稳定的处理效果;在负荷提高及稳定运行阶段,将生活污水与丙烯酸生产废水的体积比调整为5∶1,容积负荷最大提高至12.3 kg/（m3·d）,两相厌氧反应器可长期稳定运行,总COD去除率基本维持在90%以上,出水COD小于323 mg/L;当进水甲醛质量浓度为800~1 733 mg/L时,总甲醛去除率基本稳定在95.6%~99.3%;在负荷提高及稳定运行阶段,水解酸化相反应器和产甲烷相反应器的出水pH分别为6.2~7.6和7.6~8.1,出水总碱度分别为1 220~1 820 mg/L和1 800~2 620 mg/L。