Occupational hazards to health of port workers

Objectives. The aim of this article is to reduce the risk of occupational hazards and improve safety conditions by enhancing hazard knowledge and identification as well as improving safety behavior for freight port enterprises. Methods. In the article, occupational hazards to health and their prevention measures of freight port enterprises have been summarized through a lot of occupational health evaluation work, experience and understanding. Results. Workers of freight port enterprises confront an equally wide variety of chemical, physical and psychological hazards in production technology, production environment and the course of labor. Such health hazards have been identified, the risks evaluated, the dangers to health notified and effective prevention measures which should be put in place to ensure the health of the port workers summarized. Discussion. There is still a long way to go for the freight port enterprises to prevent and control the occupational hazards. Except for occupational hazards and their prevention measures, other factors that influence the health of port workers should also be paid attention to, such as age, work history, gender, contraindication and even the occurrence and development rules of occupational hazards in current production conditions.     

RETRACTED:

Jianfeng Li  Sandra M.Y. Lee  Wenmao Liu 《Process Safety and Environmental Protection》2013,91(3):213-220

Environmental risk mapping of accidental pollution and its zonal prevention in a city

Accidental releases of pollution can have severe environmental, societal, economic, and institutional consequences. This paper considers the use of risk mapping of accidental pollution events, and zonal prevention measures for alleviating the impact on large urban areas. An Environmental Pollution Accident Risk Mapping (EPARM) model is constructed according to a mapping index system supported by quantitative sub-models dedicated to evaluating the risk arising from different sources of potential accidental pollution. The EPARM approach consists of identifying suitable indexes, assessment of environmental risk at regional and national scales based on information on previous pollution accidents and the prevailing environmental and social conditions, and use of GIS to map the overall risk. A case study of pollution accidents in Minghang District, Shanghai, China is used to demonstrate the effectiveness of the model. The paper also proposes a systemic framework for accidental environmental pollution risk prevention, and detailed countermeasures for specific risk zones.     

人体装甲测试用模拟破片的应用与发展

模拟破片是人体装甲防弹性能测试评价的主要试验弹体.本文对人体装甲和模拟破片进行了阐释,分析了模拟破片的应用背景,对国内外现状进行了对比分析,对标准模拟破片的确定以及爆炸破片的发展进行了探讨,提出了开展新型模拟破片及其测试技术研究的重要意义.     

电催化氧化技术处理造纸废水的实验研究

通过邻苯二甲酸氢钾(KHP)溶液的电解实验研究了德国引进的金属铌掺硼金刚石膜电极(Nb/BDD)的电化学性质,并利用该电极处理装置处理了东莞某造纸厂造纸废水。考察了电解时间、电流强度及废水的pH值、电解质的浓度、电导率等参数对电化学降解效率的影响。结果表明,Nb/BDD具有优异的污水降解性能,在pH值为3.0,电流密度为37.23 mA/cm2,电压6.9 V,NaCl充当电解质质量浓度0.4 g/L的条件下,电解200 min,装置对再生纸造纸废水的COD的去除率接近70%,BOD/COD为0.4,比能耗为27.6(kW.h/kg)。     

地震应急避难需求的系统动力学研究

为定量研究地震应急避难人群的规模及变化规律,建立需求分析的系统动力学模型。该模型包括建筑物倒塌,断水和电梯停运3种因素造成的需求。参考汶川地震中板房建设速度和电梯修复速度,以及日本关于地震断水率的研究成果,建立非线性模型拟合各需求的变化规律。采用Vensim软件建立系统动力学模型,分析各需求的综合变化规律。采用上海市徐汇区的数据进行案例演算,并与其他研究方法对比分析仿真误差。仿真结果表明:建筑物损坏对人群数量的影响很大,但是灾后1个月内断水的影响最大;相对于工程技术因素,人因对需求有重要的影响。     

医疗保健行业中的纳米材料：职业风险和预防

欧洲职业健康安全署近期发布电子纪要,解释了保健行业工作者在他们工作场所的日常活动中如何与纳米材料发生可能的接触,并提供了预防潜在接触可以采取的措施。这些措施包括国家层面的法律监管、消除与替代、工程控制、管理措施以及个体防护装备（PPE）。作者特编译此文,为国内相关领域提供参考。     

光气生产装置的危险性及事故统计分析

通过对光气、光气化生产工艺过程存在的危险性分析,笔者认为气相光气化工艺比液相光气化工艺危险性小,而固体光气化生产工艺与气、液相光气生产工艺相比,危险性更小。同时对国内外光气和光气化生产发生事故的原因进行分析探讨,指出事故的原因主要是由管道及设备缺陷、个体防护用品缺乏、设计缺陷及人为失误引起。采用固体光气替代光气参与各种有机合成,与液相或气相光气工艺相比具有安全、反应条件温和、易操作、工艺简便、反应计量准确等优点,因此,固体光气工艺发展前景广阔。     

两相厌氧工艺的研究进展

为了了解两相厌氧工艺的研究状况,对两相厌氧反应器及相分离方法进行了综述,并指出了今后两相厌氧工艺的研究方向.     

人的差错行为对矿山安全的模糊综合评判

人的差错行为对矿山安全有着极大的影响.对人的差错行为因素进行分析,利用模糊综合评判的方法,对某煤矿工人作业行为安全性的评判,确定该煤矿矿工行为的安全状态,从而及时了解矿工情绪、心理等状态,适时地进行安全培训教育,以保障人员安全作业.