紫外分光光度法在处理废水中的应用

根据二沉池出水特点，指出了以260nm紫外光(F260)评价处理二沉池出水的理论依据，然后确定了E260与COD的关系式为：E260=0．008COD 0．083。最后以E260为评价指标，比较了3种无饥混凝剂在不同pH值条件下对城市二沉池出水的COD去除效果，确定了最佳混凝剂为三氯化铁(FC)及混凝条件：pH4．5，投药量Fe^3 为32mg/L。     

气田污泥脱水工艺研究

在对气田废水处理中产生的污泥进行处理时,普遍存在着干化周期长、含水率高等问题,严重影响了废水处理装置的处理能力。脱水剂优化选择实验以及污泥脱水性能实验结果表明:先加入聚合氯化铝并搅拌15 s,再加入阴离子聚丙烯酰胺并搅拌混合30 s,最后加入FO4190SH搅拌,混合凝聚30 s后静止分层,其凝聚效果较好。在污泥脱水性能的各项指标中,真空脱水均好于重力脱水,特别是对于新鲜污泥滤层,真空(45 kPa)脱水速度比重力脱水速度约高8倍。     

美国环保超级基金制度及其实施

对美国环保超级基金制度的概念和内容作了简要的介绍,并指出了其实施过程中的成功与不足,以期为我国环境法制的完善提供有益的借鉴。     

含油污泥特点及处理方法

含油污泥主要来源于油田开采、油气集输及污水处理场,污泥中一般含油率在10%～50%,含水率在40%～90%。文章介绍了不同来源含油污泥的特点及脱水方法,并对各种含油污泥处理方法的优、缺点进行了比较。研究结果表明,各种方法都有其特点和适用范围。由于含油污泥成分复杂,没有任何一种处理方法可以处理所有类型的含油污泥。     

Erratum to: Accumulation of Cr,Cd, Pb,Cu, and Zn by plants in tanning sludge storage sites: opportunities for contamination bioindication and phytoremediation

Environmental Science and Pollution Research -     

Optimal Policy Mechanism Design for Cross-Sector and Multi-Stage Pollution Control with a Bilevel Model: Application to SO<Subscript>2</Subscript> Emission in China

In this paper, we construct a multi-stage coordinated programming model under tax system to control SO₂ emission. The model is based on an explicitly formulated SO₂ abatement cost function created under Chinese condition. Analysis of the effectiveness and impact on the economy of the model is carried out with consideration of game theory. By solving the model, theoretical results show that the volume-based multi-stage SO₂ tax system has two properties: effectiveness and equal-rate. Based on these theoretical results, empirical study is also performed using Chinese historical data. Compared with yearly single-stage programming model, the tax rate generated by the coordinated multi-stage programming model is time-invariant and rather moderate in scale. The total abatement cost among planning years in our model is 21.03 % less than the actual number and 6.68 % less than that in the single-stage situation. The tax payment suggested by our model is 10.62 % less than by the single-stage model. In general, a coordinated multi-stage programming model helps reduce the overall costs of environmental protection while achieving the same emission control target with less burden added to the economy.     

Research status,challenges and future prospects of renewable synthetic fuel catalysts for CO2 photocatalytic reduction conversion

Environmental Science and Pollution Research - In recent years, with global climate change, the utilization of carbon dioxide as a resource has become an important goal of human society to achieve...     

Pyrolysis technologies for municipal solid waste: A review

Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO₂ and NH₃, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.     

Chemical and process mineralogical characterizations of spent lithium-ion batteries: An approach by multi-analytical techniques

Mineral processing operation is a critical step in any recycling process to realize liberation, separation and concentration of the target parts. Developing effective recycling methods to recover all the valuable parts from spent lithium-ion batteries is in great necessity. The aim of this study is to carefully undertake chemical and process mineralogical characterizations of spent lithium-ion batteries by coupling several analytical techniques to provide basic information for the researches on effective mechanical crushing and separation methods in recycling process. The results show that the grade of Co, Cu and Al is fairly high in spent lithium ion batteries and up to 17.62 wt.%, 7.17 wt.% and 21.60 wt.%. Spent lithium-ion batteries have good selective crushing property, the crushed products could be divided into three parts, they are Al-enriched fraction (+2 mm), Cu and Al-enriched fraction (?2 + 0.25 mm) and Co and graphite-enriched fraction (?0.25 mm). The mineral phase and chemical state analysis reveal the electrode materials recovered from ?0.25 mm size fraction keep the original crystal forms and chemical states in lithium-ion batteries, but the surface of the powders has been coated by a certain kind of hydrocarbon. Based on these results a flowsheet to recycle spent LiBs is proposed.     

Toxicity of urban highway runoff in Shanghai to Zebrafish (Danio rerio) embryos and luminous bacteria (Vibrio qinghaiensis.Q67)

Pollution from urban highway runoff has been identified as one of the major causes of the deterioration of receiving water quality. The purpose of this study is to assess the toxicity of urban storm water samples in Shanghai using the zebrafish (Danio rerio) embryo test and the bacterial luminescence (Vibrio qinghaiensis) assay. The toxicity of highway runoff from seventeen storm events was investigated in both grab and composite samples. Zebrafish embryos were exposed to the runoff samples and development parameters including lethality, spontaneous movements in 20 s, heart beat rate, hatching rate, and abnormality of zebrafish embryos were observed after 24, 48, 72, and 96 h of exposure. Inhibition rates of luminescence intensity were also recorded. The results showed that in the zebrafish embryo toxicity tests, both grab and composite samples increased the lethality, reduced the percentage with spontaneous movements and heart beats, inhibited the hatching of embryos, and induced morphological abnormalities. In the Vibrio qinghaiensis toxicity test, all the grab samples inhibited the luminescence, while some of the composite samples promoted it, which indicated that different types of toxicants might have been affecting the species. The multivariate statistics analysis indicated that heavy metal (zinc, manganese, and copper) and PAHs might mainly contribute to the toxicity of runoff samples.