液氯泄漏事故模拟分析

针对1996年1月21日在西班牙发生的一起液氯泄漏事故的后果进行了模拟分析。模拟分析结果同事故实际所造成的后果是一致的。表明采用基于数学模型的事故后果模拟分析具有一定程度的可靠性。对于救灾和对重大危险源编制应急事故预案有一定程度的指导意义。     

大型构件防腐喷砂(涂)车间通风除尘设计

考虑到大型构件喷砂（涂）车间铝粉尘污染的特点以及构件进出空间的限制，比较了各种类型的除尘器，选择了最合理的通风除尘方案，进行了通风除尘系统的设计。该设计方案实施后，除尘效果显著。     

美国环境保护与环境技术产业发展的主要经验和启示

随着经济和社会的发展，保护人类赖以生存的环境，走可持续发展之路，已成为世界范围内人们的共识，环境污染问题已日益成为人们关注的焦点。美国环境保护发展的历史与现状，揭示出一些促进环境保护和环境技术产业发展的经验，值得我们借鉴。     

Numerical Simulation of Synoptic Condition on a Severe Sand Dust Storm

By using observational data and MM5, an observational analysisand numerical study was conducted on the synoptic condition of a severe dust storm that was caused by a Mongolian cyclone whichoccurred from 6 to 8 April 2001. Results illustrated thatthe cyclogenesis was due to the isentropic potential vorticity (IPV) advection in the upper troposphere and the terrain modifiedbaroclinicity in the mid-lower troposphere. The Altai-Sayan complex of mountains blocked the lower level cold air and made the isentropic surface sharply steep. When the air slid down along the isentropic surface the increasing of baroclinicity anddecreasing of stability blew up the vertical vorticity development.The formation of the dust storm was a result of a cyclonic cold front passing across the area. The occurrence of this dust stormwas closely related to the strong surface wind, which was accompanied by a cold front passing, rather than the cyclogenesis, itself. Hence, the reason for the pre-front dust storm formulation was the formation of heating convection. Reasons behind the formation of a black storm (visibilitylower than 50 m), which occurred in the mid-north part ofInner Mongolia, lay in several aspects. Firstly, in thisarea the surface wind was strong, a direct result of thedownward transport in mid-lower troposphere. Secondly,the cold front passed over the effected area near sunsetso the air obtained much more surface heating to form adeeper mixed layer (ML). Thirdly, cooperation between thelower level wind and the terrain made the atmosphere inthis area and acquired the maximum advective contributionnecessary to form a deep post-front ML. The sensitivityexperiment revealed that surface heat flux was important to the frontal lifting. In addition, the forcing of surface heating wasalso seen as the primary forcing mechanism of frontogenesis. Meanwhile, removal of the surface heat flux made the atmosphericstratification became stable and the pre-storm ML very shallow,which weakened the strength of the dust storm.     

内江市沱江流域实现可持续发展的途径探讨$$$$##6研究方法

本文对内江市沱江流域经济-环境系统1995～2010年时段可持续发展进行了预测分析，指出了该区域实现可持续发展的可能途径和对策措施．     

论环保意识与现代化工企业的营销观

回顾了市场营销对企业发展的核心作用；讨论了环保意识的增强对营销活动的影响以及环保法规与经济调控对企业的巨大压力；介绍了适应时代要求的社会环境营销观的内容及对现代化工企业的影响，并对化工企业如何树立新型营销观进行了探讨。     

MODELING THE BUILDUP AND WASHOFF OF POLLUTANTS ON URBAN WATERSHEDS1

ABSTRACT: A model for urban stormwater quality was developed in this study. The basis for the model is the process by which pollutants build up on the watershed surface. For the wet climate of the study site, it was assumed that there exists an interval of time over which the pollutant buildup equals the pollutant washoff (no accumulation of pollutant). The buildup model was represented by a linear function of the antecedent dry time. The buildup function was then linked with a pollutant washoff model represented by a power function of the storm runoff volume. Various time intervals for no net accumulation were tested to calibrate the model. The model was calibrated to observed data for two small urban basins in Baton Rouge, Louisiana, and model results were used to analyze the behavior of phosphorus concentrations in storm runoff from these basins over a long period of time.     

1995年全球自然灾害评析

１９９５年是自６０年代有系统资料以来全球自然灾害经济损失最大的一年。本文根据收集到的信息，对全年的全球自然灾害分布特点及灾情作了综合评析。     

Thermal and mechanical properties of poly(lactic Acid) and poly(ethylene/butylene Succinate) blends

In this study, blends of poly (lactic acid) (PLA) with poly(ethylene/butylene succinate) (Bionolle) have been investigated for their thermal and mechanical properties as a function of the concentration of Bionolle. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and tensile tests were used to characterize the blends. From the results of the DMA and DSC, it was found that this blend system was not miscible within the compositions studied. DSC results showed that adding Bionolle aids in crystallization of PLA. It was observed that increasing the Bionolle concentration led to a slight increase in the strain-at-break of the blends but a decrease in the Young’s modulus and ultimate tensile strength. Biaxially oriented films showed an increase in tensile strength, modulus, and strain-at-break.