珊瑚碎屑颗粒内孔隙特性微观试验研究∗

珊瑚碎屑是一种特殊的岩土材料,其显著特征是存在大量的内孔隙。为了深入揭示珊瑚碎屑内孔隙特性,通过电镜扫描(SEM)和压汞试验(MIP),分别定性和定量化地分析了珊瑚碎屑颗粒表面及内部孔隙形态特征和分布规律。结果表明:珊瑚碎屑存在由珊瑚虫生长和微生物共生形成的两类大小、形态及分布不同的内孔隙;珊瑚碎屑的整体孔隙度为9%～25%,由珊瑚虫生长而形成的孔隙等效直径为10～200μm;由微生物形成的孔隙面孔隙度低,孔隙直径多为4μm以下,且等轴或不等轴孔隙占绝大部分。     

活性炭吸附室内空气中挥发性有机化合物

活性炭吸附室内空气中挥发性有机化合物的１０％穿透时间与气相浓度及挥发性有机化合物的种类有关,通过对苯、甲苯和丙酮的实验研究,得出了由高浓度估算室内低浓度时炭床１０％穿透时间的经验公式ｔｂ,１＝ｔｂ,ｈ（Ｃ０,１／Ｃ０,ｈ）＾ａ,其中ａ值是与炭床性能及挥发性有机化合物种类有关的参数,可通过实验确定。     

茚虫威对斑马鱼的急性毒性及遗传毒性

茚虫威属噁二嗪类新型广谱高效杀虫剂,在农业生产中有着重要作用,近年来随着用量的增加,由此产生的对水生生物的影响越来越受到重视。使用斑马鱼进行茚虫威的急性毒性作用实验,并采用微核试验、彗星试验、Annexin V-FITC/PI双染色检测观察染毒后的斑马鱼是否被诱导产生遗传毒性。结果表明:在24 h、48 h、72 h、96 h,茚虫威LC50值分别为2.263mg·L-1、2.184 mg·L-1、2.184 mg·L-1、2.133 mg·L-1。茚虫威对斑马鱼急性毒性属中等毒性。96 h茚虫威浓度为1.98 mg·L-1和2.16 mg·L-1时,斑马鱼的微核率与对照组相比达差异极显著水平(P0.01)。采用彗星试验检测斑马鱼肝脏DNA损伤,结果显示斑马鱼暴露于高浓度1.98 mg·L-1和2.16 mg·L-1茚虫威后,与对照组相比,斑马鱼的DNA损伤均表现为极显著差异(P0.01)。采用Annexin V-FITC/PI双染色流式细胞仪法检测,结果表明染毒后24 h斑马鱼肝细胞出现细胞凋亡现象。实验结果进一步表明,茚虫威对斑马鱼短期染毒后诱导细胞凋亡,表现出遗传毒性。     

Case study on nitrogen and phosphorus emissions from paddy field in Taihu region

The agricultural non-point source pollution by nitrogen (N) and phosphorus (P) loss from typical paddy soil (whitish soil, Bai Tu in Chinese) in the Taihu Lake region was investigated through a case study. Results shown that the net load of nutrients from white soil is 34.1 kg ha(-1) for total nitrogen (TN), distributed as 19.4 kg ha(-1), in the rice season and 14.7 kg ha(-1) in the wheat season, and for total phosphorus (TP) 1.75 kg ha(-1), distributed as 1.16 kg ha(-1) in the rice season and 0.58 kg ha(-1) in the wheat season. The major chemical species of N loss is different in the two seasons. NH4-N is main the form in the rice season (53% of TN). NO3-N is the main form in wheat season (46% of TN). Particle-P is the main form in both seasons, (about 56% of TP). The nutrient loss varied with time of the year. The main loss of nutrients happened in the 10 days after planting, 64% of TN and 42% of TP loss, respectively. Rainfall and fertilizer application are the key factors which influence nitrogen and phosphorus loss from arable land, especially rainfall events shortly after fertilizer application. So it is very important to improve the field management of the nutrients and water during the early days of planting.     

Occupational risks and the value and modelling of a measurement of severity

In studies of occupational risks, severity, which is a component of the estimation of every risk, appears as a multifaceted entity assessable according to numerous criteria. A method of measuring the degree of severity of the consequences of potentially dangerous events would be of undeniable value to organisations seeking to improve their understanding of the complexity of such events. The need to control severity is highlighted by scientifically acquired improvements in the understanding of occupational risks, by certain new regulatory obligations in Europe, and by some requirements in the financial management of organisations. We put forward a statistical way of integrating several constituent elements of severity and hence of determining a relevant, synthetic, one-dimensional index. This is achieved by means of principal component analysis (PCA), which is used here to calculate a resultant severity, as in some physical measurements. We also investigate how severity may be statistically modelled, with the aim of contributing to the quantitative assessment of occupational risks. The choice of parametric models is detailed and illustrated by the search for a suitable model for workplace accidents in an organisational setting. The practical value of modelling severity is two-fold. First, one is able to study the distribution of the numerical values of severity over a continuum (a theoretically infinite numerical set) rather than through a limited number of arbitrarily defined categories. Second, with a generally applicable parametric model, one can estimate the law of probability of a measurement of severity in a particular situation, notably recent or new. Lastly, the statistical concept of risk curve is defined and discussed. The goal is to incorporate the severity component into the risk assessment in the form of a probability law, thus circumventing the difficulties associated with an analysis of scenarios.     

煤矿危险源分类分级与预警

关于危险源概念目前尚无准确的理论界定,为此,笔者试图阐明危险源分为固有型危险源和触发型危险源的新观点,提出并说明了对不同类型危险源应采用的不同的辩识与分级方法。在此基础上,结合企业实际,提出了危险源预警思想和模块设计方法。所有这些,对完善安全管理理论,提高煤矿安全管理水平具有理论意义和实用价值     

自动电位滴定法测定气田废水中的C1~-

利用电位滴定法在７１６ＤＭＳ型自动电位滴定仪上实现对气田废水中Ｃ１－的快速、灵敏、准确测定,避免了色度、浊度的干扰。对方法的检出限、标样和实际水样精密度、准确度,进行了全面的测定分析,并与硝酸银滴定法进行了对比。氯化物的检出限为０．３２ｍｇ／Ｌ;相对标准偏差小于等于２．１％,加标回收率在９８．９％１０１％范围内,对同一标样和实际样品的测定两种方法的结果吻合较好。     

COMPARISON OF DESIGN STORM CONCEPTS USING CONTINUOUS SIMULATION WITH SHORT DURATION STORMS1

ABSTRACT: The objectives of this paper were to test the ability of various design storm distributions to simulate the actual rainfall pattern and to compare the runoff rates used in the design of stormwater management devices in the State of Florida using continuous simulation approach. The analyses were performed for four gaged stations to evaluate the applicability of design storm distributions in different parts of the State of Florida. The approach used in this study compared the peak runoff rates from design storms based on the various distributions to those that would result from actual rainfall events. A series of continuous runoff rates were developed through the use of actual fifteen-minute recorded rainfall data, Horton type infiltration decay and recovery rate, and a continuous simulation model. The runoff rates were analyzed using frequency distributions to obtain peak runoff rates associated with different return periods based on the assumption that the continuous simulation approach closely predicts the actual runoff rates from the gaged stations. The results show that the behavior of the design storm distributions varies for different watershed characteristics in different parts of the state. The study also suggests that in general the Florida Department of Transportation and the Suwanne River Water Management (FDOT/ SRWMD) distributions appeared to agree with the continuous simulation results.     

有机物好氧生物降解性的综合测试评价方法

综合考虑有机物好氧生物降解过程中的耗氧量,最终产物量和微生物活性３个影响生物降解性的因素,以ＢＯＤ５／ＣＯＤ作为耗氧指标,以ＣＯ２作为降解产物量指标,以ＡＴＰ作为微生物活性指标,根据这３个指标提出模糊聚类综合 加权综合评估２种综合评价有机物生物降解性的方法,综合评价了２２种有机化合物和有机废水的生物降解性,并比较了这２种综合评价方法的优劣,同时也提出了采用这２种综合评价方法所需进行了具体步骤。     

废催化剂浸出规律的静态实验方法

利用静态浸出实验方法对废催化剂中重金属在不同固水比和浸出次数条件下的浸出规律进行了系统研究。实验发现浸出次数大于３次后,重金属的浸出浓度和浸出速率趋于稳定,同时固水比的增加也没有明显改变废催化剂中重金属的浸出。认为在浸取次数大于３次以后,随着表面溶质的溶解,浸出过程主要为内扩散所控制。