Cadmium (Cd) distribution and contamination in Chinese paddy soils on national scale

Rice is a staple food by an increasing number of people in China. As more issues have arisen in China due to rice contaminated by cadmium (Cd), Cd contamination in arable soils has become a severe problem. In China, many studies have examined Cd contamination in arable soils on a national scale, but little studies have focused on the distribution of Cd in paddy fields. This study explored the spatial pattern of Cd in paddy soils in China, made a preliminary evaluation of the potential risk, and identified the most critically contaminated regions based on the domestic rough rice trade flow. The results showed that Cd concentrations in paddy soils in China ranged from 0.01 to 5.50 mg/kg, with a median value of 0.23 mg/kg. On average, the highest Cd concentrations were in Hunan (0.73 mg/kg), Guangxi (0.70 mg/kg), and Sichuan (0.46 mg/kg) provinces. Cd concentrations in paddy soils in central and western regions were higher than those in eastern regions, especially the southeastern coastal regions. Of the administrative regions, Cd standard exceedance rate was 33.2 %, and the heavy pollution rate was 8.6 %. Regarding to Cd of paddy soil, soil environmental quality was better in Northeast China Plain than in Yangtze River Basin and southeastern coastal region. Mining activities were the main anthropogenic pollution source of Cd in Chinese paddy soil. Based on rice trade, more of the Chinese population would be exposed to Cd through intake of rice produced in Hunan province. Certain regions that output rice, especially Hunan province, should be given priority in the management and control of Cd contamination in paddy soil.     

Trends and variations of pH and hardness in a typical semi-arid river in a monsoon climate region during 1985–2009

The rapid growth of urbanization and industrialization, along with dramatic climate change, has strongly influenced hydrochemical characteristics in recent decades in China and thus could cause the variation of pH and general total hardness of a river. To explore such variations and their potential influencing factors in a river of the monsoon climate region, we analyzed a long-term monitoring dataset of pH, SO₄ ^2?, NO_x, general total hardness (GH), Mg²⁺, Ca²⁺, and Cl^? in surface water and groundwater in the Luan River basin from 1985 to 2009. The nonparametric Seasonal Kendall trend test was used to test the long-term trends of pH and GH. Relationship between the affecting factors, pH and GH were discussed. Results showed that pH showed a decreasing trend and that GH had an increasing trend in the long-term. Seasonal variation of pH and GH was mainly due to the typical monsoon climate. Results of correlation analysis showed that the unit area usage amounts of chemical fertilizer, NO₃ ^?, and SO₄ ^2? were negatively correlated with pH in groundwater. In addition, mining activity affected GH spatial variation. Acid deposition, drought, and increasing the use of chemical fertilizers would contribute to the acidification trend, and mining activities would affect the spatial variation of GH. Variations of precipitation and runoff in semi-arid monsoon climate areas had significant influences on the pH and GH. Our findings implied that human activities played a critical role in river acidification in the semi-arid monsoon climate region of northern China.     

过硫酸钾-偶氮复合引发体系合成杂化高分子絮凝剂PACS-PAM及其表征

采用过硫酸钾(K2S2O8)-偶氮二异丁咪唑啉盐酸盐(VA-044引发剂)复合引发体系合成了聚硫氯化铝-聚丙烯酰胺(PACS-PAM)杂化高分子絮凝剂。以特性黏度为指标,考察了引发剂配比、引发剂总用量、单体质量浓度、总铝浓度(AlT)、反应温度和反应时间等因素对杂化絮凝剂PASC-PAM的合成影响,结果表明,杂化絮凝剂PACS-PAM的最佳合成条件为引发剂K2S2O8与偶氮VA-044质量比为3:1、引发剂总用量为单体总质量的0.2%、单体质量浓度为0.21 g/mL、总铝浓度(AlT)为0.15 mol/L、反应温度为50 ℃、反应时间为3 h,在最佳条件下合成的杂化高分子的特性黏度为14.70 dL/g。电导率分析、红外光谱(FTIR)分析和热重-差热(DTA-TGA)分析表明,杂化絮凝剂中有机组分同无机组分是通过PAM分子链端的硫酸根离子(—SO42-)的桥连作用以离子键形式连接的。对黄泥悬浊液的絮凝效果研究表明,杂化絮凝剂PASC-PAM的絮凝效果优于复配絮凝剂PASC-PAM。     

紫外-Fenton法处理高盐有机废水

以某电镀厂水回用系统产生的高盐有机废水为对象,对比研究了Fenton、UV-Fenton等工艺去除COD性能,考察了初始pH、H2O2投加量、Fe2+与H2O2摩尔比、反应时间等参数对处理效果的影响。结果表明:UV-Fenton工艺的最佳条件为初始pH=3.0,H2O2的投加量3 mmol/L,RFe2+:H2O2=1:1,反应时间30 min;在此条件下,COD去除率可达到60%以上,分别较Fenton和UV-H2O2工艺提高23.0%和39.3%。UV-Fenton工艺中,Fenton与UV表现出良好的协同效果,其处理效果较单独Fenton和单独UV处理效果之和高14.7%。UV的引入促进Fe(II)/Fe(Ⅲ)循环,可以提高·OH生成量以及Fe2+与H2O2利用率。UV-Fenton是处理高盐有机废水的可行工艺之一。     

强化除磷型A/O-MBR工艺运行稳定性

采用缺氧/好氧膜生物反应器(A/O-MBR)处理合成的生活污水,考察了投加不同浓度的聚合氯化铝(PAC)对该工艺在除磷效能及运行稳定性方面的影响。结果表明,投加PAC可以有效降低出水TP的浓度;在投加量为150 mg/L时,TP的去除率达到最优,为90.1%,出水浓度维持0.48 mg/L左右,达到《城镇污水处理厂污染物排放标准》(GB18918-2002)的一级A标准。投加一定量的PAC可以有效提高微生物的活性;此外,可以降低污泥絮体的Zeta电位,增大污泥絮体的粒径,降低胞外聚合物(EPS)中多糖的浓度,进而有效延缓膜污染的速率。     

铁屑耦合生物麦饭石的PRB系统修复含铬酸根与硝酸根地下水

针对污染地下水中铬酸根和硝酸根迁移速度快,可渗透反应墙(PRB)常规活性材料修复效果差等问题,以铁屑、麦饭石和硫酸盐还原菌(SRB)为活性材料,构建4组耦合PRB动态柱修复地下水中Cr(Ⅵ)和NO3--N。结果表明,4#(铁屑、麦饭石和SRB)柱修复效果较1#(麦饭石)、2#(铁屑、麦饭石)和3#(麦饭石和SRB)柱好,且稳定,对Cr(Ⅵ)和NO3--N平均去除率分别是97.7%和97.34%,可见,以铁屑、麦饭石和硫酸盐还原菌为活性材料的耦合PRB系统修复地下水中Cr(Ⅵ)和NO3--N具有有效性与可行性。     

嗜油菌NY3对蜡质油污泥无害化处理

蜡质油污泥(WOS)成分复杂,含大量老化原油、蜡质油、沥青质及其他化学药剂,属危险性固体废弃物,大量排放已成为石化企业可持续发展的障碍。研究利用铜绿假单胞菌NY3处理高浓度WOS的条件,结果表明,WOS:木屑(m/m)(d=0.30 mm) 7:1并结合热熔分散为最佳油污泥预处理条件;液相降解体系含油量为24.5 g/L时,6 d内,油泥中C20以下的正构烷烃完全被去除,C21~C34和C35~C38大分子量正构烷烃去除率分别在91%~99%和78%~89%之间。添加鼠李糖脂能明显提高长链烃和多环芳烃的降解率。6 d内210 mg/L鼠李糖脂使C29~C38的降解率提高17.27%~36.65%,芘、菲分别提高13.67%和16.12%。添加葡萄糖和Fe2+的条件下,NY3菌可将油污泥转化成为糖蛋白,产量达28 g/L。     

中国工业水污染及其成因的de Bruyn模型分析

选取废水、挥发酚、氰化物、COD、石油类和氨氮为中国工业水污染指标,利用分解分析方法将2004—2010年间的污染变化分解为规模效应、结构效应、污染治理效应、清洁技术效应和广义技术效应。结果显示,这5类效应的平均作用强度分别为2.08%、3.04%、15.61%、17.37%和32.88%,其中规模效应和广义技术效应是影响工业水污染的主导效应。各类效应对不同污染物的作用方向并不完全一致,规模效应促进污染物排放量的增加;结构效应以加重污染为主,污染治理效应和清洁技术效应以减轻污染为主;广义技术效应的平均作用强度和负向作用概率均最大,是现阶段中国工业水污染控制最为有效的手段。     

硫酸盐还原菌污泥固定化特性

采用玉米芯为碳源,聚乙烯醇(PVA)为包埋载体,饱和硼酸(H3BO3)为交联剂,研究了硫酸盐还原菌污泥(SRBS)、铁屑、麦饭石共固处理合成煤矿酸性废水的最优配比与机理,并分析了固定化过程中小球稳定性及活性的变化规律。实验结果表明,SRBS投加量是影响处理效果的最显著因子,当投加30%SRBS、2%铁屑、3%麦饭石时SO42-、Mn2+去除率分别为94.13%和84.39%,溶液pH为7.03,未检测出Fe2+;随着交联时间的延长,小球膨胀率及SO42-还原率分别呈线性与指数下降,从保持小球稳定性与活性角度考虑,可将交联时间设定为4~8 h;该法可为市政污泥的处置以及生物法处理煤矿酸性废水的工程应用提供技术参考。     

PVC/PES-g-PEGMA共混膜的制备及其耐污染性能

首先将聚乙二醇单甲基甲醚酯(PEGMA)接枝到聚醚砜(PES)上得到PES-g-PEGMA,然后利用溶液共混的方法,将聚氯乙烯(PVC)与PES-g-PEGMA共混,通过溶剂-非溶剂扩散诱导相分离法(NIPS)制备PVC/PES-g-PEGMA共混膜。在此基础上对PVC/PES-g-PEGMA共混膜的断面和表面微观结构、水通量、 截留率、机械性能及耐污染等性能进行测试,并采用接触角,含水率(EWC),X 射线光电子能谱仪(XPS) 来表征PES-g-PEGMA 的质量百分含量对 PVC/PES-g-PEGMA 共混膜亲水性的影响。结果表明,PVC/PES-g-PEGMA共混膜水通量,亲水性较纯PVC有很大程度的提高。耐污染性实验表明,随着PES-g-PEGMA的增加,耐污染性逐渐增强。实验结果同时也表明,该共混体系最佳共混比为7:3。