Influence of coagulation mechanisms and floc formation on filterability

Minimizing particles in water is a key goal for improving drinking water quality and safety.The media filtration process,as the last step of the solid–liquid separation process,is largely influenced by the characteristics of flocs,which are formed and controlled within the coagulation process.In a laboratory-based study,the impacts of the physical characteristics of flocs formed using aluminum sulfate on the filtration treatment of two comparative water samples were investigated using a photometric dispersion analyzer and a filterability apparatus.In general,the optimum dosage for maximizing filterability was higher than that for minimizing turbidity under neutral p H conditions.For a monomeric aluminum-based coagulant,the charge neutralization mechanism produced better floc characteristics,including floc growth speed and size,than the sweep flocculation mechanism.In addition,the charge neutralization mechanism showed better performance compared to sweep flocculation in terms of DOC removal and floc filterability improvement for both waters,and showed superiority in turbidity removal only when the raw water had high turbidity.For the different mechanisms,the ways that floc characteristics impacted on floc filterability also differed.The low variation in floc size distribution obtained under the charge neutralization mechanism resulted in the flocs being amenable to removal by filtration processes.For the sweep flocculation mechanism,increasing the floc size improved the settling ability of flocs,resulting in higher filter efficiency.     

菌渣中阿维菌素残留检测方法及其无害化工艺研究

文章建立了简单、快速的阿维菌素菌渣中阿维菌素残留量高校液相色谱检测方法以及利用水热法处理阿维菌素菌渣。采用固相萃取-高效液相色谱检测方法测定阿维菌素菌渣中阿维菌素残留量,提取剂为乙腈/水=4/1(V/V),采用HLB固相萃取柱进行净化。加标回收率90.3%~107.3%,相对标准偏差(RSD)为3.00%~5.69%,阿维2菌素标准曲线线性相关系数R~2=0.999 6,线性范围为1.0~1 000 mg/L。利用正交实验,水热法处理阿维菌素菌渣,在190℃的温度下处理2 h后,菌渣中阿维菌素残留量由991.30降至0.84 mg/kg,去除率达99.92%。处理前后的菌渣与有机肥标准作对比,除含水率外其余检测指标均达到有机肥标准要求。该项研究为阿维菌素菌渣的资源化利用提供了理论依据。     

外浮顶原油储罐VOCs泄漏损耗及排放量核算

介绍了国内外浮顶原油储罐VOCs泄漏损耗形式。结合美国环保署(EPA)发布的AP-42中第7章储罐的VOCs相关排放公式,建立了外浮顶原油储罐VOCs排放量核算的方法,并对核算方法的应用进行了举例分析,有助于掌握现阶段原油外浮顶储罐的泄漏损耗量,为推进企业绿色低碳发展,控制原油储罐VOCs总量排放提供参考。     

延迟焦化装置含硫污水减量化实践

在分析160×10~4t/a延迟焦化装置含硫污水来源及减量化潜力基础上,通过采取优化加热炉注汽量、调整焦炭塔吹汽量、降低分馏塔汽提蒸汽量、回用含硫污水汽提净化水等管理和技术措施,装置节约了蒸汽消耗,源头减少了含硫污水产生量,增加了含硫污水汽提净化水回用量,年经济效益达460万元。     

某环氧乙烷精制塔爆炸事故HAZOP分析

针对某烯烃厂乙二醇装置环氧乙烷精制塔的爆炸事故,采用HAZOP分析方法对该乙二醇装置进行定性工艺危害分析,辨识该装置存在的安全隐患。针对爆炸的环氧乙烷精制塔,结合事故爆炸后果,利用HAZOP分析理念,分析环氧乙烷精制塔爆炸原因,最终提出相应的整改建议。     

生态敏感性评价在生态文明建设中的运用研究——以四川省蓬安县为例

以四川省蓬安县为例,基于GIS空间分析技术,结合蓬安当地实际,选取水源涵养、土壤保持能力和生物多样性进行生态敏感性评价,获得蓬安县区域敏感性现状图,并以此为基础构建生态安全格局,该格局注重区域的内在机理与周围的相对联系,保证各生态环境功能区成为具有各自特点、功能和生命活力而又彼此联系的有机体,为其生态文明建设过程中重点领域和重点工程设计规划提供基础支撑,阐明了生态敏感性评价在生态文明建设中的运用,为县级生态文明建设规划做出了贡献.     

污水净化装置内部流场特性分析研究

针对目前城市污水存在悬浮物和砂粒的问题,为了减少砂粒大量存在给后续单元带来的处理压力,设计了一种可实现在加药、絮凝等处理模块前,完成污水内固相悬浮物及颗粒的新型净化装置.基于计算流体动力学软件Fluent,运用混合相模型(Mixture),对新型污水净化装置内部流场特性及分离性能进行数值模拟分析.模拟结果显示新型污水净化装置内部流场分布均匀,分离性能稳定并呈现出了较好的固相去除效果,其中悬浮物的分离效率达90%以上,固相颗粒分离效率达91%.     

省级生态保护红线划定实践研究 ——以青岛市为例

在省级及以上禁止开发区、重点生态功能保护区等进行调查分析的基础上,以青岛市为实践区域,与多类规划衔接,划定青岛市省级生态保护红线.青岛市最终划定59处省级生态保护红线区,面积合计1120.65 km2,占国土面积的9.9%.划定的生态保护红线符合确立"三生"空间和落实"多规合一"的要求,有利于改善生态系统服务功能,保障人居环境安全,增强经济社会可持续发展能力,对于青岛市市级生态保护红线的划定和生态安全格局的构建具有非常重要的意义.     

基于GIS和RS的市域尺度下的植被NPP研究

在GIS和RS支持下,利用土地利用类型数据、地面气象数据和遥感影像数据,以青岛市为例,研究了市域尺度下的植被NPP空间分布特征.结果表明:青岛市NPP值为0~288 g·m-2·a-2,林地NPP值较高,耕地次之,建成区等区域最小.在小尺度区域内,NPP分布受土地利用类型影响较大,受气象因素影响较小.NPP模块在数据获取上比较容易,仅利用土地利用类型数据、地面气象数据和遥感数据就可以对陆地植被NPP进行计算,实际应用可操作性强.30 m分辨率植被NPP计算值更适宜于在市级小尺度区域内应用.     

Use of ATP Readings to Predict a Successful Hygiene Intervention in the Workplace to Reduce the Spread of Viruses on Fomites

The purpose of this study was to validate the use of adenosine triphosphate (ATP) for evaluating hygiene intervention effectiveness in reducing viral dissemination in an office environment. The bacterial virus MS-2 was used to evaluate two scenarios, one where the hand of an individual was contaminated and another where a fomite was contaminated. MS-2 was selected as a model because its shape and size are similar to many human pathogenic viruses. Two separate experiments were conducted, one in which the entrance door push plate was inoculated and the other in which the hand of one selected employee was inoculated. In both scenarios, 54 selected surfaces in the office were tested to assess the dissemination of the virus within the office. Associated surface contamination was also measured employing an ATP meter. More than half of the tested hands and surfaces in the office were contaminated with MS-2 within 4 h. Next, an intervention was conducted, and each scenario was repeated. Half of the participating employees were provided hand sanitizer, facial tissues, and disinfecting wipes, and were instructed in their use. A significant (p < 0.05) reduction was observed in the number of surfaces contaminated with virus. This reduction in viral spread was evident from the results of both viral culture and the surface ATP measurements, although there was no direct correlation between ATP measurements with respect to viral concentration. Although ATP does not measure viruses, these results demonstrate that ATP measurements could be useful for evaluating the effectiveness of hygiene interventions aimed at preventing viral spread in the workplace.