采用数值风洞模型对热电厂烟塔合一大气污染扩散的研究

随着城市的快速建设,城市建筑的高度和体量不断增加,同时大气污染源的排放方式和排放状态也与从前发生了很大的变化,特别是热电厂采用烟塔合一排放方式的出现,对常规应用的稳态远距离以统计学为基础理论的高斯大气预测方法提出了挑战。目前国内外广泛使用的大气污染物预测模式——德国模式在烟塔合一排放方式的预测上存在着许多关键性问题,如大风下洗条件下,冷却塔附近空腔区的大小和范围、空腔区污染物最高地面浓度等无法给出准确的预测结果。为准确预测烟塔合一排放方式的大气污染物扩散情况,采用一种新的大气污染物扩散的预测模式——数值风洞模型进行模拟预测研究,预测结果表明,在烟塔合一排放方式下,大气污染物最高地面浓度随风速增加而增加,同时在冷却塔下风向存在负压区,污染物在该区域高浓度聚集。且在夏季6.0m/s风速下,冷却塔下风向最高地面浓度出现峰值,属于最不利的气象条件。数值风洞模型可利用图形化手段实现对空腔区产生、变化、破碎至再生成的全过程描述,从而建立了一种大气污染预测的重要手段。     

Using biochar for remediation of soils contaminated with heavy metals and organic pollutants

Soil contamination with heavy metals and organic pollutants has increasingly become a serious global environmental issue in recent years. Considerable efforts have been made to remediate contaminated soils. Biochar has a large surface area, and high capacity to adsorb heavy metals and organic pollutants. Biochar can potentially be used to reduce the bioavailability and leachability of heavy metals and organic pollutants in soils through adsorption and other physicochemical reactions. Biochar is typically an alkaline material which can increase soil pH and contribute to stabilization of heavy metals. Application of biochar for remediation of contaminated soils may provide a new solution to the soil pollution problem. This paper provides an overview on the impact of biochar on the environmental fate and mobility of heavy metals and organic pollutants in contaminated soils and its implication for remediation of contaminated soils. Further research directions are identified to ensure a safe and sustainable use of biochar as a soil amendment for remediation of contaminated soils.     

一种新型活性半焦吸附剂的制备及其表面特征分析

对一种原料半焦进行粉碎、筛分,取其中10～20目的颗粒;用去离子水冲洗后高温下烘干至恒重;依次进行HNO3活化、KOH活化和加压水热化学活化,制备出活性半焦吸附剂。经实验证明,该活性半焦吸附剂对甲苯的吸附等温线符合Langmuir模型,其甲苯吸附容量可达207 mg/g,穿透时间由80 min延长至235 min。该活性半焦吸附剂的比表面积为555.56 m2/g,碘值为811.38 mg/g,表面酸碱总量为0.8649 mmol/g,并通过SEM扫描进行了表面微观形态分析。数据表明,经改性后制备出的新型活性半焦对甲苯的去除率明显增加,其表面物化性质也有明显改变,是一种优良的有机废气吸附剂。     

Temporal patterns of atmospheric mercury species in northern Mississippi during 2011–2012: Influence of sudden population swings

Gaseous elemental mercury (GEM), gaseous oxidized mercury (GOM) and particulate bound mercury (PBM) were measured on the University of Mississippi campus from July 2011 to June 2012. It is believed to be the first time that concentrations of atmospheric mercury species have been documented in northern Mississippi, and at a location with relatively large and sudden swings in population. The mean concentration (±1SD) of GEM was 1.54 ± 0.32 ng m⁻³; levels were lower and generally more stable during the winter (1.48 ± 0.22) and spring (1.46 ± 0.27) compared with the summer (1.56 ± 0.32) and fall (1.63 ± 0.42). Mean concentrations for GOM and PBM were 3.87 pg m⁻³ and 4.58 pg m⁻³, respectively; levels tended to be highest in the afternoon and lowest in the early morning hours. During the fall and spring academic semesters concentrations and variability of GOM and PBM both increased, possibly from vehicle exhaust. There were moderate negative correlations with wind speed (all species) and humidity (GOM and PBM). Backward air mass trajectory modeling for the ten highest peaks for each mercury species revealed that the majority of these events occurred from air masses that passed through the northern continental US region. Overall, this study illustrates the complexity of temporal fluctuations of airborne mercury species, even in a small town environment.     

Fingerprinting of High Boiling Hydrocarbon Fuels,Asphalts and Lubricants

Fingerprinting of hydrocarbon products requires high resolution differentiation of individual hydrocarbon compounds in any mixture. This requires the applications of various measuring techniques. In this paper, we have chosen the heavy hydrocarbons in fuels, lubricants and paving material as examples to discuss the methods for chemical characterization and differentiation. In the category most frequently termed "semi-volatile hydrocarbons" with boiling points from about 500°F to 1200°F or higher, there are several families of hydrocarbons, both natural and refined that are not easily distinguished by conventional EPA tests. Among the groups which we will use as examples are asphalts, hydraulic fluid, transmission oil, motor lubricating oils, heating oils, crude oil and coal. These hydrocarbon families are best studied using combined gas chromatography-mass spectrometry in full scan mode and characterizing various homologous series of hydrocarbons at known fragment ions. The hydrocarbon series providing the best information are: (1) N -alkanes; (2) iso-alkanes; (3) steranes; (4) terpanes; (5) polynuclear aromatic hydrocarbons; (6) aromatic steranes; and (7) specific polycyclic compounds.     

Identification of sources of elevated concentrations of polycyclic aromatic hydrocarbons in an industrial area in Tianjin, China

The concentrations of 16 polycyclic aromatic hydrocarbons (PAHs) were determined by gas chromatography equipped with a mass spectrometry detector in 105 topsoil samples from an industrial area around Bohai Bay, Tianjin in the North of China. Results demonstrated that concentrations of PAHs in 104 soil samples from this area ranged from 68.7 to 5,590 ng g^???1 dry weight with a mean of ∑16PAHs 814 ± 813 ng g^???1, which suggests that there exists mid to high levels of PAH contamination. The concentration of ∑16PAHs in one soil sample from Tianjin Port was exceptionally high (48,700 ng g^???1). Ninety-three of the 105 soil samples were considered to be contaminated with PAHs (>200 ng g^???1), and 25 were heavily polluted (>1,000 ng g^???1). The sites with high PAHs concentration are mainly distributed around chemical industry parks and near highways. Two low molecular weight PAHs, naphthalene and phenanthrene, were the dominant components in the soil samples, which accounted for 22.1% and 10.7% of the ∑16PAHs concentration, respectively. According to the observed molecular indices, house heating in winter, straw stalk combustion in open areas after harvest, and petroleum input were common sources of PAHs in this area, while factory discharge and vehicle exhaust were the major sources around chemical industrial parks and near highways. Biological processes were probably another main source of low molecular weight PAHs.     

活性炭纤维负载TiO2催化剂的制备及其电催化性能

采用溶胶-凝胶法制备了活性炭纤维负载TiO₂催化剂（TiO₂/ACF）,并通过SEM和XRD等手段对TiO₂/ACF进行了表征。以邻苯二甲酸二甲酯（DMP）为目标降解物,考察了催化材料的电催化活性。实验结果表明：在反应温度为25 ℃、初始DMP质量浓度为100.0 mg/L、电解质Na₂SO₄质量浓度为100 mg/L、电流密度为62.5 mA/cm²、电极板间距为4 cm的条件下,经过40 min的降解,DMP质量浓度为1.8 mg/L,DMP去除率为98.2%;TiO₂/ACF在反应过程中可以原位再生,经6次重复使用后仍保持很高的催化活性,对DMP的去除率仍达90%以上。     

Nitrogen evolution during the co-combustion of hydrothermally treated municipal solid waste and coal in a bubbling fluidized bed

Nitrogen evolution was studied during the co-combustion of hydrothermally treated municipal solid wastes (HT MSW) and coal in a bubbling fluidized bed (BFB). HT MSW blending ratios as 10%, 20% and 30% (wt.%) were selected and tested at 700, 800, 900 °C. Emissions of NO and N₂O from blends were measured and compared with the results of mono-combustion trials. Moreover, concentrations of precursors like NH₃ and HCN were also quantified. The results are summarized as follows: NO emissions were predominant in all the cases, which rose with increasing temperature. The blending of HT MSW contributed to the NO reduction. N₂O emissions decreased with temperature rising and the blending of HT MSW also presented positive effects. At 30% HT MSW addition, both NO and N₂O emissions showed the lowest values (391.85 ppm and 55.33 ppm, respectively at 900 °C). For the precursors, more HCN was detected than NH₃ and both played important roles on the gas side nitrogen evolution.     

铁路噪声对沿线住宅小区的影响

主要考虑铁路噪声的直达声和一次反射声对住宅小区的影响,建立了铁路沿线城市住宅区列车噪声衰减的理论模型,计算分析了铁路噪声对建筑群纵深的影响,并与实测值进行比较,验证了模型的可靠性.     

Carbonaceous and nitrogenous disinfection byproduct precursor variation during the reversed anaerobic–anoxic–oxic process of a sewage treatment plant

Disinfection byproduct(DBP)precursors in wastewater during the reversed anaerobic–anoxic–oxic(A~2/O)process,as well as their molecular weight(MW)and polarity-based fractions,were characterized with UV scanning,fluorescence excitation emission matrix,Fourier transform infrared and nuclear magnetic resonance spectroscopy.Their DBP formation potentials(DBPFPs)after chlorination were further tested.Results indicated that the reversed A~2/O process could not only effectively remove the dissolved organic carbon(DOC)and dissolved total nitrogen in the wastewater,but also affect the MW distribution and hydrophilic–hydrophobic properties of dissolved organic matter(DOM).The accumulation of low MW and hydrophobic(HPO)DOM was possibly due to the formation of soluble microbial product-like(SMP-like)matters in the reversed A~2/O treatment,especially in the anoxic and aerobic processes.Moreover,DOM in the wastewater displayed a high carbonaceous disinfection byproduct formation potential(C-DBPFP)in the fractions of MW100 k Da and MW5 k Da,and revealed an increasing tendency of nitrogenous disinfection byproduct formation potential(N-DBPFP)with decrease of MW.For polarity-based fractions,the HPO fraction of wastewater showed significantly higher C-DBPFP and N-DBPFP than hydrophilic and transphilic fractions.Therefore,although the reversed A~2/O process could remove most DBP precursors by DOC reduction,it led to the enhancement of DBPFP with the formation and accumulation of low MW and HPO DOM.In addition,strong correlations between C-DBPFPs and SUVA,and between N-DBPFPs and DON/DOC,were observed in the wastewater,which might be helpful for DBPFP prediction in wastewater and reclaimed water chlorination.