Evidence for the inhibitory effects of silver nanoparticles on the activities of soil exoenzymes

Silver nanoparticles (AgNPs) are well known to have antimicrobial ability, but very little is known about the effect of AgNPs on soil exoenzyme activities, which reflect the potential of a soil to support biochemical processes. This study provides evidence of the inhibitory effects of AgNPs on the activities of soil exoenzymes. Six exoenzymes related to nutrient cycles (urease, acid phosphatase, arylsulfatase, β-glucosidase) and the overall microbial activity (dehydrogenase, fluorescein diacetate hydrolase) were tested in soils treated with AgNPs (1, 10, 100 and 1000 μg g(-1)) and silver ion (0.035, 0.175, 0.525, 1 and 1.5 μg g(-1)). AgNPs were capable of inhibiting the activities of all the exoenzymes tested in this study. Especially, the urease and dehydrogenase activities were significantly related to the presence of AgNPs. The effects of silver ions dissolved from the AgNPs were not significant, indicating the adverse effects caused by AgNPs themselves. This study suggested that AgNPs negatively affect soil exoenzyme activities, with the urease activity especially sensitive to AgNPs.     

Degradation of o-toluidine by fluidized-bed Fenton process: statistical and kinetic study

Background, aim, and scope  

The optimal conditions of o-toluidine degradation by fluidized-bed Fenton process were determined using Box–Behnken designs (BBD). The BBD can be used to find the optimal conditions in multivariable systems. The optimal conditions obtained by the design were further applied in the kinetic analysis of o-toluidine oxidation in fluidized-bed Fenton process.     

改性酚醛基炭泡沫的表面结构及脱硫脱硝

采用前驱体改性的方法,以CuCl2、FeCl2和MgCl2为改性剂,制备出改性酚醛泡沫,经炭化/活化得到改性酚醛基炭泡沫。研究了不同金属对酚醛基炭泡沫表面物理与化学特性的影响,并进行同时脱硫脱硝实验研究。通过研究发现,添加CuCl2的样品比添加FeCl2、MgCl2的样品的中孔孔容大接近10倍;比表面积和孔容是CFCu>CF0>CFFe>CFMg;金属改性剂主要以金属和金属氧化物的形式存在于酚醛基炭泡沫中,而表面其他官能团大体结构不变。经CuCl2、FeCl2和MgCl2改性后,脱硫效率分别提高了39%、11%和13%,脱硝效率分别提高了19%、10%和4%,其中以CuCl2改性的酚醛基炭泡沫的效率最高。     

简单芽孢杆菌产高效微生物絮凝剂

通过从绿化植物根际土壤和污水处理厂的活性污泥中分离筛选絮凝剂产生菌,得到一株稳定高效的微生物絮凝剂产生菌PS1,根据形态学特征、生理生化实验以及16S rDNA序列分析将其鉴定为简单芽孢杆菌(Bacillus simplex)。对菌株PS1产生絮凝剂的最佳培养时间、絮凝活性分布以及pH、CaCl2、絮凝剂投量对絮凝效果的影响进行了研究,并考察了其对实际废水的絮凝效果。结果表明,菌株PS1产絮凝剂的最佳培养时间为36 h,产生的絮凝活性物质全部存在于发酵液离心后的上清液中;当pH为7.0～8.5、CaC12投量为0.25～0.35 g/L、发酵液投加量的体积分数为1.5%～2.5%时,菌株PS1发酵液对4 g/L的高岭土悬浊液的絮凝效果最佳,絮凝率达到97%。菌株PS1所产絮凝剂对城市污水、啤酒废水、淀粉废水、医院废水的絮凝率可达90%以上。     

三元乙丙橡胶超细纤维复合膜的制备及其截留性能

以四氢呋喃和N,N-二甲基甲酰胺为溶剂,配制三元乙丙橡胶(EPDM)纺丝液,通过静电纺丝技术制备了EPDM超细纤维,进而以聚偏氟乙烯(PVDF)微滤膜为基膜制备了EPDM超细纤维复合膜。采用红外光谱(FTIR)和扫描电子显微镜(SEM)对EPDM超细纤维的结构和形态进行了表征。考察了复合膜对苯乙烯废水的截留效果和复合膜通量的变化情况。实验结果表明:EPDM超细纤维具有类似无纺布形式的多孔纤维网状结构,其直径在0.2~2.0μm之间;复合膜在操作压力为0.1MPa的条件下,处理质量浓度为100μg/mL的模拟苯乙烯废水,膜通量约为5.90mL/(cm2.h),苯乙烯去除率可达89.7%。     

Properties of alkali-activated systems with stone powder sludge

This article investigates the effects of stone powder sludge on the microstructure and strength development of alkali-activated fly ash and blast furnace slag mixes. Stone powder sludge produced from a crushed aggregate factory was used to replace fly ash and granulated blast furnace slag at replacement ratios of 0%, 10%, 20%, and 30% by mass. The unit weight and compressive strength of the samples were measured, and scanning electron microscopy/energy dispersive spectroscopy and X-ray diffraction (XRD) analyses were performed. The test results indicated that the compressive strength of alkali-activated blast furnace slag mixes using stone powder sludge was higher than that of the alkali-activated blast furnace slag control mix, but the compressive strength of alkali-activated fly ash mixes decreased with increasing replacement ratio of stone powder sludge. Microscopy results indicated that for alkaliactivated blast furnace slag samples, broken surfaces were more evident than for the alkali-activated fly ash samples. For all XRD diagrams, broad and diffuse peaks were observed around 2θ = 35° (d = 2.96–3.03 Å), implying amorphous or short-ordering structure phases.     

城市总体规划环评指标体系的建立及其应用

本研究首先介绍了DPSIR模型构建的原理,接着以合肥市为对象,从驱动力、压力、状态、影响、响应5个方面来构建的共36个指标,并采用层次分析法对指标权重的确定和多级灰色关联分析对指标进行综合评价,得出评价结果。合肥市在2004~2005年处于较低可持续发展水平(0.3398、0.3876)、在2010年处于中等可持续发展水平(0.5369)、在2015年处于较高可持续发展水平(0.6016)、在2020年处于较高可持续发展水平(0.7847),该预测评价结果与合肥市城市可持续发展趋势相符。最后采用改进熵值法验证多级灰色关联综合分析结论,计算得出的结果表明,该两种方法评价结论基本相同。因此,本研究对城市总体规划环境影响评价的评价方法的建立与完善,有着较强的实践意义和参考价值。     

提高油田伴生气回收率的研究与应用

文章阐述了陆梁油田在开发过程中采用油气混输技术、天然气发电机橇技术、锅炉烧湿气等技术,将伴生气回收率提高至92.10%;油气混输技术能够实现边缘区块油气全密闭输送;集中处理站锅炉燃烧湿气技术可增加处理站天然气外输气量,降低运行成本;小型活动天然气发电机橇的应用,可以充分利用富裕天然气降低生产成本,同时减少富裕天然气火炬放空燃烧量,收到了良好的经济效益和环境效益。     

Solid phase extraction with pyrenebutyric acid-bonded silica for analysis of polychlorinated biphenyls in sewage water by gas chromatography-mass spectrometry

A solid phase extraction (SPE) method using pyrenebutyric acid-bonded silica (PYB) as sorbent was developed to determine 23 polychlorinated biphenyls (PCBs) in sewage water by gas chromatography-mass spectrometry (GC-MS). Factors were optimized in SPE procedures including elution solvent, pH, and cartridge burden. The recoveries of 23 PCB congeners were 69.44-111.91% under optimized conditions. Comparisons were also conducted among PYB-SPE, C(18)-SPE and United States Environmental Protection Agency 608 (USEPA608) methods in the analysis of PCBs in sewage water samples. The results showed that the performance of PYB-SPE method was similar with USEPA608 method and better than C(18)-SPE method. Both PYB-SPE and USEPA608 methods were then employed to analyze PCBs in real spiked sewage water samples. The recoveries of PCB congeners determined by PYB-SPE method ranged from 70.6% to 92.4% in real spiked sewage water samples which were identified to be in accordance with USEPA608 method. Limits of detection (LOD) were in the range of 0.06-0.22ngL(-1) for PCB congeners. The optimized PYB-SPE method was successfully applied to the determination of PCBs in sewage water samples.     

Optimum conditions for microbial carbonate precipitation

The type of bacteria, bacterial cell concentration, initial urea concentration, reaction temperature, the initial Ca(2+) concentration, ionic strength, and the pH of the media are some factors that control the activity of the urease enzyme, and may have a significant impact on microbial carbonate precipitation (MCP). Factorial experiments were designed based on these factors to determine the optimum conditions that take into consideration economic advantage while at the same time giving quality results. Sporosarcina pasteurii strain ATCC 11859 was used at constant temperature (25°C) and ionic strength with varying amounts of urea, Ca(2+), and bacterial cell concentration. The results indicate that the rate of ureolysis (k(urea)) increases with bacterial cell concentration, and the bacterial cell concentration had a greater influence on k(urea) than initial urea concentration. At 25 mM Ca(2+) concentration, increasing bacterial cell concentration from 10(6) to 10(8)cells mL?1 increased the CaCO(3) precipitated and CO(2) sequestrated by over 30%. However, when the Ca(2+) concentration was increased 10-fold to 250 mM Ca(2+), the amount of CaCO(3) precipitated and CO(2) sequestrated increased by over 100% irrespective of initial urea concentration. Consequently, the optimum conditions for MCP under our experimental conditions were 666 mM urea and 250 mM Ca(2+) at 2.3×10? cells mL?1 bacterial cell concentration. However, a greater CaCO(3) deposition is achievable with higher concentrations of urea, Ca(2+), and bacterial cells so long as the respective quantities are within their economic advantage. X-ray Diffraction, Scanning Electron Microscopy and Energy Dispersive X-ray analyzes confirmed that the precipitate formed was CaCO(3) and composed of predominantly calcite crystals with little vaterite crystals.