Combustion characteristics of simulated gas fuel in a 30 kg/h scale pyrolysis-melting incinerator

Combustion characteristics of gas fuel in a pyrolysis-melting incinerator having a 30kg/h capacity were investigated. Pyrolyzed gas from waste was simulated by propane that was injected in the combustion chamber, and burnt through multi-staged combustion by distributing the combustion air to primary, secondary, and tertiary air nozzles. Temperatures and the concentrations of gas components in the combustion chamber were measured. Combustion performance was evaluated with respect to the temperature distribution and combustion gas concentrations of O(2), CO and NO(x). Using secondary air and/or tertiary air, the combustion performance was improved, and, in particular, NO(x) concentration decreased significantly following the tertiary air injection.     

Pretreatment of automobile shredder residue (ASR) for fuel utilization

Automobile shredder residue (ASR) was pretreated to improve its quality for fuel utilization. Composition analysis revealed that ASR components could be classified into four groups: (1) urethane and textile-light fraction and combustibles containing low levels of ash and Cl; (2) plastics and rubber-light or heavy fraction and combustibles containing high levels of Cl; (3) metals and electrical wire-heavy fraction and incombustibles, and (4) particles smaller than 5.6mm with high ash contents. Based on these results, we successively performed sieving to remove particles smaller than 5.6mm, float and sink separations to reject the heavy fraction and plastics and rubber containing Cl, thermal treatment under an inert atmosphere to remove Cl derived from PVC, and char washing to remove soluble chlorides. This series of pretreatments enabled the removal of 78% of the ash and 91% of the Cl from ASR. Sieving using a 5.6-mm mesh removed a considerable amount of ash. Product quality was markedly improved after the float and sink method. Specifically, the sink process using a 1.1 g cm(-3) medium fluid rejected almost all rubber containing Cl and a large amount of PVC. The remaining Cl in char, after heating at 300 degrees C under an inert atmosphere and washing, was considered to be present as insoluble chlorides that volatilized at temperatures above 300 degrees C. Based on a tradeoff relationship between product quality and treatment cost, ASR may be utilized as a form of refuse plastic fuel or char.     

Characterization of products obtained from pyrolysis and steam gasification of wood waste,RDF, and RPF

Pyrolysis and steam gasification of woody biomass chip (WBC) obtained from construction and demolition wastes, refuse-derived fuel (RDF), and refuse paper and plastic fuel (RPF) were performed at various temperatures using a lab-scale instrument. The gas, liquid, and solid products were examined to determine their generation amounts, properties, and the carbon balance between raw material and products.The amount of product gas and its hydrogen concentration showed a considerable difference depending on pyrolysis and steam gasification at higher temperature. The reaction of steam and solid product, char, contributed to an increase in gas amount and hydrogen concentration. The amount of liquid products generated greatly depended on temperature rather than pyrolysis or steam gasification. The compositions of liquid product varied relying on raw materials used at 500 °C but the polycyclic aromatic hydrocarbons became the major compounds at 900 °C irrespective of the raw materials used. Almost fixed carbon (FC) of raw materials remained as solid products under pyrolysis condition whereas FC started to decompose at 700 °C under steam gasification condition.For WBC, both char utilization by pyrolysis at low temperature (500 °C) and syngas recovery by steam gasification at higher temperature (900 °C) might be practical options. From the results of carbon balance of RDF and RPF, it was confirmed that the carbon conversion to liquid products conspicuously increased as the amount of plastic increased in the raw material. To recover feedstock from RPF, pyrolysis for oil recovery at low temperature (500 °C) might be one of viable options. Steam gasification at 900 °C could be an option but the method of tar reforming (e.g. catalyst utilization) should be considered.     

Vibrio alginolyticus,a tetrodotoxin-producing bacterium,in the intestines of the fish Fugu vermicularis vermicularis

The influence of nutrient deprivation on cell-cycle progression was examined in two phytoplankton species, the diatom Thalassiosira weissflogii (actin) and the coccolithophorid Hymenomonas carterae (cocco II). The diatom was starved for nitrogen, silicon or both, whereas only nitrogen limitation was examined in H. carterae. In both species, nitrogen-starved cells were arrested in the early part of the cell cycle (G₁ phase). In the diatom, silicon-starvation arrested cells in late G₁ phase and also in the last part of the cell cycle (G₂+M). In all cases, cell-cycle arrest could be reversed by addition of fresh medium, but cell-cycling times during the first generation were increased in comparison to those in nutrient replete, steady-state growth conditions. These results supply evidence for simultaneous dual-nutrient limitation of population growth and provide a mechanistic interpretation for the division patterns observed in cultures where nutrients are supplied periodically.     

Effects of arsenic on osmoregulation in the tilapia Oreochromis mossambicus reared in seawater

The effects of arsenic (As₂O₃) on plasma osmolarity, Na and K concentrations, the activity of gill Na–K-ATPase, and on the ultrastructure of gill chloride cells were compared between seawater tilapia (Oreochromis mossambicus) and freshwater tilapia in the Institute of Zoology, Academia Sinica, between 1989 and 1991. Arsenic was found to be more lethal in seawater tilapia [96 h LC₅₀ (median lethal concentration): 26.5 ppm] than in freshwater ones (71.7 ppm). No significant effect was found on plasma ion concentrations and osmolarity, enzyme activity or the ultrastructure of chloride cells in freshwater tilapia after 96 h exposure to 70 ppm arsenic. In contrast, 96 h exposure to 15 ppm arsenic caused evident effects in seawater tilapia: an increase in plasma osmolarity and activity of gill Na–K-ATPase, as well as better development of the chloride cell tubular system. These data suggest that the lethal effect of arsenic may be partially attributed to a hydromineral disturbance in seawater tilapia, but in freshwater tilapia arsenic perhaps causes destruction in some physiological mechanisms other than osmoregulation. The activation of gill Na–K-ATPase and chloride cells in seawater tilapia appears to indicate an adaptation in the osmoregulatory mechanism to arsenic exposure, i.e., to enhance secreting ions or arsenic in the gills.     

Geochemical and Geophysical Monitoring of Salinewater Intrusion in Korean Paddy Fields

The saline water intruded zone in paddy fields near the seashore can be diagnosed accurately by joint exploration with geophysical and geochemical methods. Using the electromagnetic (EM) sounding technique, the weakly consolidated zone which introduces saline water into such an area of near seashore paddy fields in Korea was detected from the variation of electrical conductivity distribution following field irrigation. Vertical electrical sounding (VES) with Schlumberger array and chemical analysis of top soils, and groundwater in the study area verified the intruded zone near the surface. The VES results showed that the intrusion of seawater occurred in the form of a channel down to 30 m below sea level. Geochemical analysis of the top soil samples for the six major elements found in seawater indicated that the region showing high concentrations is concordant with the weakly consolidated zone near the surface. The degree of contamination in the study area was investigated by comparing the soil data with those from a nearby old reclamation field. If remediation work is not done for this intrusion zone, the sodicity degree in the paddy soil is expected to increase compared with the reference site data.     

The effects of wind speed on the relative relationships between different sized-fractions of airborne particles

The concentrations of three different size fractions of particulate matter (PM) including PM2.5, PM10, and TSP were determined continuously at hourly intervals from four different sites in Seoul, Korea during the spring of 2001. To learn the effects of wind speed change on PM fractionation, the entire data sets were initially sorted into three particle fractions such as: fine (F: PM2.5), coarse (C: PM10-PM2.5), and giant (G: TSP-PM10). The inter-fraction relationships of PM were then explored by linear regression analysis of the data divided into four wind speed regimes. The results of this analysis, when examined in terms of either relative dominance between different PM fractions (i.e., in terms of their slope values) or strength of correlations, indicate the existence of diverse inter-fraction patterns. Most importantly, the physical influence of wind speed is seen to be reflected most efficiently between fine and coarse particle fractions, as the relative contribution of coarse fraction to the mass concentration of total particles (e.g., PM10) changes proportionally with changes in wind speed. However, such systematic patterns decrease noticeably between fine and giant fractions, as they can be affected more sensitively by such factors as the nature of their sources or the surrounding environmental conditions. The results of our comparative analysis thus confirm that wind speed is a useful barometer to distinguish and predict the behavior of different particle fractions in relation to each other.     

Emission of heavy metals from animal carcass incinerators in Taiwan

The metal emissions from three incinerators burning different feedstock in Taiwan were characterized in this study. It was found that the Incinerators A and B, treating pig carcasses and animal (including pigs) carcasses, respectively, had much higher metal concentrations in stack flue gases than Incinerator C that combusted medical wastes. However, Incinerator A obtained relative lower metal contents in fly ash and bottom ash than the other two incinerators, mainly because the former used a much lower feedstock rate (although burning at a lower temperature) than the latter. For all the incinerators, (1) Fe, Ni, Pb, and Zn were dominant in both the fly ash and bottom ash while most of the Cd and Pb (more volatile) were present in the fly ash; (2) Fe emission factor was the highest and Zn/Pb/Ni/Cr emission factors were greater than those of Mn/Cd/Cu; (3) the Cu emission factors in bottom ash were relatively higher in comparison with those in fly ash; and (4) indicatory metals were the same (Fe, Zn, Pb, and Cu). The metal emission factors obtained from the livestock incinerators were much higher than those reported from MSW incinerators. Likewise, crematories that burn human cadavers must create similar pollution issues since metal supplements are part of human's normal diets. This causes an environmental concern and this work has important ramifications both in technical and regulatory decisions.