Study of microbes having potentiality for biodegradation of plastics

Plastic is a broad name given to the different types of organic polymers having high molecular weight and is commonly derived from different petrochemicals. Plastics are generally not biodegradable or few are degradable but in a very slow rate. Day by day, the global demand of these polymers is sharply increasing; however, considering their abundance and potentiality in causing different environmental hazards, there is a great concern in the possible methods of degradation of plastics. Recently, there have been some debates at the world stage about the potential degradation procedures of these synthetic polymers and microbial degradation has emerged as one of the potential alternative ways of degradation of plastics. Alternatively, some scientists have also reported many adverse effects of these polymers in human health, and thus, there is an immediate need of a potential screening of some potential microbes to degrade these synthetic polymers. In this review, we have taken an attempt to accumulate all information regarding the chemical nature along with some potential microbes and their enzymatic nature of biodegradation of plastics along with some key factors that affect their biodegradability.     

A Reexamination of the Ozone Limiting Approach to Estimating Short-Term NO2 Concentrations

The partition and effective diffusion coefficients of formaldehyde were measured for three materials (conventional gypsum wallboard, “green” gypsum wallboard, and “green” carpet) under three relative humidity (RH) conditions (20%, 50%, and 70% RH). The “green” materials contained recycled materials and were friendly to environment. A dynamic dual-chamber test method was used. Results showed that a higher relative humidity led to a larger effective diffusion coefficient for two kinds of wallboards and carpet. The carpet was also found to be very permeable resulting in an effective diffusion coefficient at the same order of magnitude with the formaldehyde diffusion coefficient in air. The partition coefficient (K _ma) of formaldehyde in conventional wallboard was 1.52 times larger at 50% RH than at 20% RH, whereas it decreased slightly from 50% to 70% RH, presumably due to the combined effects of water solubility of formaldehyde and micro-pore blocking by condensed moisture at the high RH level. The partition coefficient of formaldehyde increased slightly with the increase of relative humidity in “green” wallboard and “green” carpet. At the same relative humidity level, the “green” wallboard had larger partition coefficient and effective diffusion coefficient than the conventional wallboard, presumably due to the micro-pore structure differences between the two materials. The data generated could be used to assess the sorption effects of formaldehyde on building materials and to evaluate its impact on the formaldehyde concentration in buildings.

Implications: Based on the results of this study, the sink effects of these commonly used materials (conventional and “green” gypsum wallboards, “green” carpet) on indoor formaldehyde concentration could be estimated. The effects of relative humidity on the diffusion and partition coefficients of formaldehyde were found to differ for materials and for different humidity levels, indicating the need for further investigation of the mechanisms through which humidity effects take place.     

Seasonal,Episodic and Targeted Control of Sulfate Deposition

The large differences in seasonal rates of wet sulfate deposition observed at many receptors in eastern North America imply that reducing SO₂ emissions only in the summer half of the year (April-September) would bring about greater annual wet sulfate deposition reductions than reducing emissions by the same amount year-round. Targeting the emission reductions to those source areas which contribute the bulk of summer depositions in ecologically sensitive areas would increase further the gain factor, defined as the ratio of annual fractional deposition decrement to annual fractional emission decrement. In the northeastern U.S., between 10 and 15 rain episodes deposit about 60 percent of the annual wet sulfate; reducing emissions in the dry periods preceding these heavy deposition episodes could further increase the gain factor. However, it is difficult to predict these episodes, and they do not occur simultaneously over large regions of the country.     

Evaluation of low wind modeling approaches for two tall-stack databases

The performance of the AERMOD air dispersion model under low wind speed conditions, especially for applications with only one level of meteorological data and no direct turbulence measurements or vertical temperature gradient observations, is the focus of this study. The analysis documented in this paper addresses evaluations for low wind conditions involving tall stack releases for which multiple years of concurrent emissions, meteorological data, and monitoring data are available. AERMOD was tested on two field-study databases involving several SO₂ monitors and hourly emissions data that had sub-hourly meteorological data (e.g., 10-min averages) available using several technical options: default mode, with various low wind speed beta options, and using the available sub-hourly meteorological data. These field study databases included (1) Mercer County, a North Dakota database featuring five SO₂ monitors within 10 km of the Dakota Gasification Company’s plant and the Antelope Valley Station power plant in an area of both flat and elevated terrain, and (2) a flat-terrain setting database with four SO₂ monitors within 6 km of the Gibson Generating Station in southwest Indiana. Both sites featured regionally representative 10-m meteorological databases, with no significant terrain obstacles between the meteorological site and the emission sources. The low wind beta options show improvement in model performance helping to reduce some of the overprediction biases currently present in AERMOD when run with regulatory default options. The overall findings with the low wind speed testing on these tall stack field-study databases indicate that AERMOD low wind speed options have a minor effect for flat terrain locations, but can have a significant effect for elevated terrain locations. The performance of AERMOD using low wind speed options leads to improved consistency of meteorological conditions associated with the highest observed and predicted concentration events. The available sub-hourly modeling results using the Sub-Hourly AERMOD Run Procedure (SHARP) are relatively unbiased and show that this alternative approach should be seriously considered to address situations dominated by low-wind meander conditions.

Implications: AERMOD was evaluated with two tall stack databases (in North Dakota and Indiana) in areas of both flat and elevated terrain. AERMOD cases included the regulatory default mode, low wind speed beta options, and use of the Sub-Hourly AERMOD Run Procedure (SHARP). The low wind beta options show improvement in model performance (especially in higher terrain areas), helping to reduce some of the overprediction biases currently present in regulatory default AERMOD. The SHARP results are relatively unbiased and show that this approach should be seriously considered to address situations dominated by low-wind meander conditions.     

Variation of Mass Scattering Efficiencies in IMPROVE

Abstract

The Interagency Monitoring of Protected Visual Environments (IMPROVE) equation used to assess compliance under the U.S. Environmental Protection Agency (EPA) Haze Rule assumes that dry mass scattering efficiencies for aerosol chemical components are constant. However, examination of aerosol size distributions and chemical composition during the Big Bend Regional Aerosol and Visibility Observational Study and the Southeastern Aerosol and Visibility Study suggests that volume and mass scattering efficiencies vary directly with increasing particle light scattering and aerosol mass concentration. This is consistent with the observation that particle distributions were shifted to larger sizes under more polluted conditions and appears to be related to aging of the aerosol during transport to remote locations.     

Dissipation kinetics of spiromesifen on tea (Camellia sinensis) under tropical conditions

Spiromesifen (Oberon) is a new insecticide and miticide of chemical class ketoenol active against white flies (Bemisia spp., Trialeuroides spp.) and spider mites (Tetranychus and Panonychus spp.). Due to its potential significance in insect resistance management, it is important to establish its behaviour on crop and environment. In the present study, the degradation/dissipation of spiromesifen on tea crop under tropical environmental conditions was studied and its DT(50) (t(1/2)), and DT(90) (time to reduce to 90% of the initial value) were estimated. Spiromesifen was sprayed on tea crop after first rain flush at four different locations @ 96 and 192ga.i.ha(-1). Samples of tea leaves were drawn at 0, 1, 3, 5, 7, 10, 15, 21 and 30 days after treatment and that of soil at 10 days after treatment and at harvest from 0 to 15 and 15 to 30cm layers. After crude extraction of tea leaves for spiromesifen residues with acetone:water, the contents were partitioned with cyclohexane:ethyl acetate and cleaned up on Florosil column. Soil residues were also extracted similarly. Quantification of residues was done on GC-MS in Selected Ion Monitoring (SIM) mode in mass range 271-274m/z. The LOQ of this method was found to be 0.05microgg(-1) while LOD being 0.015microgg(-1). The DT(50) of spiromesifen when applied at recommended doses in tea leaves was found to be 5.0-8.5 days. Ninety-nine percent degradation was found to occur within 33-57 days after application. In soil, no residues of spiromesifen were detectable 10 days after treatment.     

Revised algorithm for estimating light extinction from IMPROVE particle speciation data

The Interagency Monitoring of Protected Visual Environments (IMPROVE) particle monitoring network consists of approximately 160 sites at which fine particulate matter (PM2.5) mass and major species concentrations and course particulate matter (PM10) mass concentrations are determined by analysis of 24-hr duration sampling conducted on a 1-day-in-3 schedule A simple algorithm to estimate light extinction from the measured species concentrations was incorporated in the 1999 Regional Haze Rule as the basis for the haze metric used to track haze trends. A revised algorithm was developed that is more consistent with the recent atmospheric aerosol literature and reduces bias for high and low light extinction extremes. The revised algorithm differs from the original algorithm in having a term for estimating sea salt light scattering from Cl(-) ion data, using 1.8 instead of 1.4 for the mean ratio of organic mass to measured organic carbon, using site-specific Rayleigh scattering based on site elevation and mean temperature, employing a split component extinction efficiency associated with large and small size mode sulfate, nitrate and organic mass species, and adding a term for nitrogen dioxide (NO2) absorption for sites with NO2 concentration information. Light scattering estimates using the original and the revised algorithms are compared with nephelometer measurements at 21 IMPROVE monitoring sites. The revised algorithm reduces the underprediction of high haze periods and the overprediction of low haze periods compared with the performance of the original algorithm. This is most apparent at the hazier monitoring sites in the eastern United States. For each site, the PM10 composition for days selected as the best 20% and the worst 20% haze condition days are nearly identical regardless of whether the basis of selection was light scattering from the original or revised algorithms, or from nephelometer-measured light scattering.     

Mathematical Modeling of Leachates from Ash Ponds of Thermal Power Plants

The present study describes the development of empirical models for the prediction of various trace metals i.e., Mn, Cu, Fe, Zn and Pb found in the leachates generated from the ash ponds of various thermal power plants. The dispersion phenomenon of these trace metals followed first order reaction rate kinetics. The empirical models for individual trace metals derived from the lab scale models data correlate well with the real field data with regression coefficients varying from 0.93 to 0.98. The predicted concentrations of the trace metals varied within ±3% of the observed values in the leachates generated from the ash ponds of four thermal power plants with standard deviation varying from 0.001 to 0.032. The empirical models derived from the study can be applied for prediction of trace metals in leachates generated from similar thermal power plants.     

Persistence and Dissipation Kinetics of Spiromesifen in Chili and Cotton

In a field study carried out at three different locations, the dissipation of spiromesifen on cotton and chili was studied and its DT₅₀, and DT₉₉ were estimated at each location. Spiromesifen was sprayed on chili at 96 and 192 g a.i. ha⁻¹ and cotton at 120 and 240 g a.i. ha⁻¹. Samples of chili fruits were drawn at 0, 1, 3, 5, 7, 10, 15, 21, 30 days after treatment and that of cotton seed and lint at first picking and harvest. Soil samples were drawn 30 days after treatment from 0 to 15 and 15 to 30 cm layer. Quantification of residues was done on GC–MS in Selected Ion Monitoring (SIM) mode in mass range 271–274 m/z. The LOQ of this method was found 0.033 μg g⁻¹, LOD being 0.01 μg g⁻¹. The DT₅₀ of spiromesifen when applied at recommended doses in chili fruits was found to be 2.18–2.40 days. Ninety-nine percent degradation was found to occur within 14.5–16.3 days after application. Residues of spiromesifen were not detected in cotton seed and lint samples at the first picking. In soil, no residues of spiromesifen were detectable 15 days after treatment.