Visualizing dynamic capabilities as adaptive capacity for municipal water governance

This study seeks to expand empirical research on how municipalities have adapted and innovated (or not) their water systems as a result of climate change. We analyze characteristics of water governance at the municipal scale in Oklahoma, USA. ArcMap 10.3 was used to build a qualitative geographic information system (GIS) based on fieldwork, including interviews and site-observations, to compare dynamic capabilities that lead to innovation in 38 cities in the state. The GIS enables visualization of our digitalized research to understand the interconnections between drivers of innovativeness—the combination of dynamic capabilities and innovation rates—and state of water resource infrastructure in place specific and regional planning contexts. In particular, the GIS takes into consideration income level, the influence of state-level water policy (Water for 2060 Act), water manager certification levels, population, dynamic capabilities, and perceptions of risk and vulnerability to water system change. Digitizing this information provides a diverging perspective on the historical lack of innovation in the public sector, as different socio-cultural, socio-economic, and socio-political contexts occur throughout Oklahoma, a state notorious for its oil centered economy and its climate change deniers. The findings suggest that innovativeness is directly related to dynamic capabilities and indirectly related to population size, income level, and the educational backgrounds of water decision-makers. The visualizations also show that some cities have surplus capacity for adaptation, while others were able to more efficiently turn capacity into water management innovations. Seeing representations of water governance success and failure in communities affords the opportunity to educate citizens and decision-makers to adapt water infrastructures to the effects of climate change, showcasing the utility of digitalization in a quest for sustainable solutions.     

Distribution and availability of potentially toxic metals in soil in central area of Belgrade,Serbia

Belgrade, capital city of Serbia, has over 1,600,000 inhabitants and over 400,000 vehicles trafficking every day on its streets. The investigation of soil pollution was performed by sequential extraction analysis to investigate the availability of potentially toxic metals (Zn, Cd, Pb, Co, Ni, Cu, Cr and Mn) under different oxidation and pH conditions. All investigated metals were mainly extracted from soils with neutral or acidic extractants. Serious pollution was observed along roads and streets with high traffic frequency, but Pb and Ni pollution was the highest since their concentrations exceed both soil Serbian standard and Canadian guidance values and is characteristic for all investigated sites. Cd, Cu, Cr and Zn concentrations are moderately high since they are between Canadian guideline and Serbian standard.     

Influence of the secondary motions on pollutant mixing in a meandering open channel flow

This paper presents large eddy simulation of turbulent flow in a meandering open channel with smooth wall and rectangular cross-section. The Reynolds number based on the channel height is 40,000 and the aspect ratio of the cross-section is 4.48. The depth-averaged mean stream-wise velocity agree well to experimental measurements. In this specific case, two interacting cells are formed that swap from one bend to the other. Transport and mixing of a pollutant is analysed using three different positions of release, e.g. on the inner bank, on the outer bank and on the centre of the cross section. The obtained depth-average mean concentration profiles are reasonably consistent with available experimental data. The role of the secondary motions in the mixing processes is the main focus of the discussion. It is found that the mixing when the scalar is released on the centre of the cross-section is stronger and faster than the mixing of the scalar released on the sides. When the position of release is close to a bank side, the mixing is weaker and a clear concentration of scalar close to the corresponding side-wall can be observed in both cases.     

Nanoscience in food and agriculture: research,industries and patents

High population rise and climate changes are increasing issues of agricultural production and food safety. Nanotechnology is finding revolutionary applications to improve agricultural and food systems, notably for better crop production and food preservation. Here we review research, industrial and patent trends of nanoscience in food and agriculture. In a literature survey, we found 44.6% publications in the nano-food research area during the years 2013–2015 and 59.09% publications in the nano-agriculture research area during 2012–2015. USA is leading in the development of nanotechnology firms with a maximum share of 75.5% of the total firms, followed by Germany and France with 8.10 and 4.74%, respectively. USA is leading in the nano-food research with 22 granted patents, whereas China is placed first in nano-agriculture research with 28 granted patents during assessment years 2011–2015. Nano-food research focused mainly on nano-food packaging with 76.84% contributions, whereas in nano-agriculture research, focus has been on nano-fertilizers with 90% contributions. Germany, France, Korea, Italy, Czech Republic, Slovenia and Slovak republic have more than 20% of dedicated nanotechnology firms. A growth of about 45% in nano-food patents has been observed for USA during 2011–2015, and China is leading in the nano-agriculture patents with an increase of 60.7% during 2012–2015.     

Rapid assessment of different oxygenic phototrophs and single-cell photosynthesis with multicolour variable chlorophyll fluorescence imaging

We present a new system for microscopic multicolour variable chlorophyll fluorescence imaging of aquatic phototrophs. The system is compact and portable and enables microscopic imaging of photosynthetic performance of individual cells and chloroplasts using different combinations of blue, green, red or white light. Automated sequential exposure of microscopic samples to the three excitation colours enables subsequent deconvolution of the resulting fluorescence signals and colour marking of cells with different photopigmentation, i.e., cyanobacteria, green algae, red algae and diatoms. The photosynthetic activity in complex mixtures of phototrophs and natural samples can thus be assigned to different types of phototrophs, which can be quantified simultaneously. Here, we describe the composition and performance of the new imaging system and present applications with both natural phytoplankton and microalgal culture samples.     

Echolocation behavior of the bat <Emphasis Type="Italic">Vespertilio murinus</Emphasis> reveals the border between the habitat types “edge” and “open space”

We test the hypothesis that echolocation behavior can be used to find the border between bat habitats. Assuming that bats react to background targets in “edge space” but not in “open space”, we determined the border between these two habitat types for commuting individuals of the parti-colored bat Vespertilio murinus. We recorded sequences of bats’ echolocation signals while they flew parallel to the walls of large buildings and to the ground and determined the signals’ average bandwidth, duration, and pulse interval. These parameters varied systematically with the estimated horizontal and vertical distances between the bats and the background. A distinct effect of horizontal distance to the background on echolocation behavior was found for horizontal distances of less than 6 m, thus indicating the border between edge and open space. Only a few bats flew at vertical distances below 5 m. However, enough passages at vertical distances of 5 m and above indicated that the vertical border is somewhere below a distance of 5 m. Within edge space, V. murinus reacted to the background by reducing signal duration, increasing bandwidth at closer distances, and often emitting one signal per wing beat. In open space, signal parameters did not vary as a function of distance to the background. There, V. murinus emitted the longest signals with the narrowest bandwidth and often made one or two wing beats without emitting a pulse. With our data we support with statistical methods the hypothesis that echolocation behavior reveals the border between the habitat types “edge” and “open space”.     

Defensive volatile secretions of two diplopod species attract the carrion ball roller scarab <Emphasis Type="Italic">Canthon morsei</Emphasis> (Coleoptera: Scarabaeidae)

Summary. We report field and laboratory evidence indicating that the defensive compounds secreted by the millipedes Amplinus bitumidus (Diplopoda: Polydesmida) and Anadenobolus putealis (Diplopoda: Spirobolida) attract the carrion scarab Canthon morsei (Scarabaeidae: Scarabaeinae). In a Mexican tropical rain forest, C. morsei was mostly caught in pitfall traps baited with the carcasses of both millipede species. Only a few beetles were attracted to fish carrion. Experimental evidence indicates that C. morsei is attracted to freshly dead millipedes. Benzaldehyde and HCN were identified from Amplinus bitumidus; but 2-methyl-1,4-benzoquinone (toluquinone) and 2-methoxy- 3-methyl-1,4-benzoquinone from Anadenobolus putealis. Benzaldehyde attracted significantly more C. morsei individuals than fish meat, or millipedes of both species did after rinsing in hexane. This is the first report of Polydesmida attracting dung beetles.     

Sustainable management of construction site big visual data

Architecture, Engineering, Construction, Operation and Ownership (AECOO) team up in a multi-disciplinary collaborative system to create buildings and infrastructure. The participating disciplines have reached a state in which traditional methods and forms of input data introduce entropy that compromises sustainable construction in larger projects. It became difficult to reach planned optimum project duration and costs this way. New approaches based on the systematic digitalization of the building lifecycle, from design to demolition, can solve the problem by involving the concepts of building information modeling (BIM) systems and big data. Previous research on BIM and big data only studied the potential for construction performance. In addition to extending research into systems’ thinking and technical sustainability of big visual data, this paper extends our previous work in the area by introducing a new conceptual and technical framework for sustainable management of construction site big visual data.     

Sensitivity analysis of a parameterization of the stomatal component of the DO3SE model for Quercus ilex to estimate ozone fluxes

A sensitivity analysis of a proposed parameterization of the stomatal conductance (g(s)) module of the European ozone deposition model (DO(3)SE) for Quercus ilex was performed. The performance of the model was tested against measured g(s) in the field at three sites in Spain. The best fit of the model was found for those sites, or during those periods, facing no or mild stress conditions, but a worse performance was found under severe drought or temperature stress, mostly occurring at continental sites. The best performance was obtained when both f(phen) and f(SWP) were included. A local parameterization accounting for the lower temperatures recorded in winter and the higher water shortage at the continental sites resulted in a better performance of the model. The overall results indicate that two different parameterizations of the model are needed, one for marine-influenced sites and another one for continental sites.     

Principles and perspectives

BACKGROUND, AIM AND SCOPE: With respect to the enormous increase of chemical production in the last decades and the tens of thousands of individual chemicals on the market, the permanent improvement of chemical management is a permanent target to achieve the goals of sustainable consumption and production set by the WSSD in Johannesburg 2002. MAIN FEATURES: Several approaches exist to describe sustainability of chemistry. However, commonly agreed criteria are still missing. There is no doubt that products of modern chemistry help to achieve important goals of sustainability and that significant improvements have occurred regarding direct releases from production sites, but several facts demonstrate that chemistry is far from being sustainable. Still too many chemicals exhibit hazardous characteristics and pose a risk to health and environment. Too many resources are needed to produce chemicals and finished products. RESULTS AND CONCLUSION: Therefore, a strategy for sustainability of chemistry should be developed which comprises the following main elements: 1. Sustainable chemicals: sustainable chemical management includes a regulatory framework which makes no difference between new and existing chemicals, contains efficient information flow through the supply chain which allows users to handle chemicals safely and offers an authorisation procedure and/or an efficient restriction procedure for substances of high concern. This regulatory scheme should promote the development of inherently safe chemicals. 2. Sustainable chemical production: Sustainable chemical production needs the development and implementation of emerging alternative techniques like selective catalysis, biotechnology in order to release less CO2 and less toxic by-products, to save energy and to achieve higher yields. Information exchange on best available techniques (BAT) and best environmental practices (BEP) may help to promote changes towards more sustainability. 3. Sustainable products: An integrated product policy which provides a framework for sustainable products promotes the development of products with a long-term use phase, low resource demand in production and use, low emission of hazardous substances and properties suitable for reuse and recycling. This may be promoted by eco-labelling, chemical leasing concepts and extended information measures to enhance the demand of consumers and various actors in the supply chain for sustainable products. RECOMMENDATION AND PERSPECTIVE: Important tools for the promotion of sustainable chemistry are the abolition of barriers for innovation in legislation and within the chemical industry, more transparency for all users of chemical products, a new focus on sustainability in education and research, and a new way of thinking in terms of sustainability.