Comparison of batch, stirred flow chamber, and column experiments to study adsorption, desorption and transport of carbofuran within two acidic soils

Different methods (batch, column and stirred flow chamber experiments) used for adsorption and desorption of carbofuran studies were compared. All tested methods showed that the carbofuran adsorption was higher in the soil with the higher organic matter content, whereas the opposite behaviour was observed for the percentage of carbofuran desorbed. However, different methods have revealed some discrepancies in carbofuran adsorption/desorption kinetics. Although batch method showed interesting data on equilibrium experiments, such as a low heterogeneity for the carbofuran adsorption sites independent of soil organic matter content, it had some disadvantages for carbofuran adsorption/desorption kinetic studies. The disadvantages were related with the excessive limitations of this method on kinetics, i.e., no difference could be detected between different soils. However, with column and stirred flow chamber methods the carbofuran adsorption/desorption kinetics of different soils could be compared. Moreover, the absolute values of carbofuran adsorption/desorption and its rate were higher in the stirred flow chamber than in the batch and column experiments. Using stirred flow chamber experiments the carbofuran desorption was significantly faster than its adsorption, whereas carbofuran using column experiments they were similar. These discrepancies should be considered when the results obtained only with one method is discussed.     

Volatile organic compound concentrations, emission rates, and source apportionment in newly-built apartments at pre-occupancy stage

The present study investigated the indoor concentrations of selected volatile organic compounds (VOCs) and formaldehyde and their indoor emission characteristics in newly-built apartments at the pre-occupancy stage. In total, 107 apartments were surveyed for indoor and outdoor VOC concentrations in two metropolitan cities and one rural area in Korea. A mass balanced model was used to estimate surface area-specific emission rates of individual VOCs and formaldehyde. Seven (benzene, ethyl benzene, toluene, m,p-xylene, o-xylene, n-hexane, and n-heptane) of 40 target compounds were detectable in all indoor air samples, whereas the first five were detected in all outdoor air samples. Formaldehyde was also predominant in the indoor air samples, with a high detection frequency of 96%. The indoor concentrations were significantly higher than the outdoor concentrations for aromatics, alcohols, terpenes, and ketones. However, six halogenated VOCs exhibited similar concentrations for indoor and outdoor air samples, suggesting that they are not major components emitted from building materials. It was also suggested that a certain portion of the apartments surveyed were constructed by not following the Korean Ministry of Environment guidelines for formaldehyde emissions. Toluene exhibited the highest emission rate with a median value of 138 μg m⁻² h⁻¹. The target compounds with median emission rates greater than 20 μg m⁻² h⁻¹ were toluene, 1-propanol, formaldehyde, and 2-butanone. The wood panels/vinyl floor coverings were the largest indoor pollutant source, followed by floorings, wall coverings, adhesives, and paints. The wood panels/vinyl floor coverings contributed nearly three times more to indoor VOC concentrations than paints.     

Synthesis of iron composites on nano-pore substrates: Identification and its application to removal of cyanide

Two types of nano-pore substrates, waste-reclaimed (WR) and soil mineral (SM) with the relatively low density, were modified by the reaction with irons (i.e. Fe(II):Fe(III) = 1:2) and the applicability of the modified substrates (i.e. Fe-WR and Fe-SM) on cyanide removal was investigated. Modification (i.e. Fe immobilization on substrate) decreased the BET surface area and PZC of the original substrates while it increased the pore diameter and the cation exchange capacity (CEC) of them. XRD analysis identified that maghemite (γ-Fe₂O₃) and iron silicate composite ((Mg, Fe)SiO₃) existed on Fe-WR, while clinoferrosilite (FeSiO₃) was identified on Fe-SM. Cyanide adsorption showed that WR adsorbed cyanide more favorably than SM. The adsorption ability of both original substrates was enhanced by the modification, which increased the negative charges of the surfaces. Without the pH adjustment, cyanide was removed as much as 97% by the only application of Fe-WR, but the undesirable transfer to hydrogen cyanide was possible because the pH was dropped to around 7.5. With a constant pH of 12, only 54% of cyanide was adsorbed on Fe-WR. On the other hand, the pH was kept as 12 without adjustment in Fe-WR/H₂O₂ system and cyanide was effectively removed by not only adsorption but also the catalytic oxidation. The observed first-order rate constant (k_obs) for cyanide removal were 0.49 (±0.081) h⁻¹. Moreover, the more cyanate production with the modified substrates indicated the iron composites, especially maghemite, on substrates had the catalytic property to increase the reactivity of H₂O₂.     

Phthalides as promising insecticides against Tuta absoluta (Lepidoptera: Gelechiidae)

In this study, the insecticide potential of eight phthalides derived from furan-2(5H)-one was evaluated against Tuta absoluta (Meyrick) (Lepidoptera: Gelechiidae) larvae. The potency of the most active phthalides and the susceptibility of six different T. absoluta populations to these compounds were determined. The toxicity of these molecules to two non-target species (Solenopsis saevissima Smith and Tetragonisca angustula Latreille) was also evaluated. Two phthalides (3 and 4) presented insecticide potential against T. absoluta. Phthalide 4 was as toxic as piperine (positive control) and both phthalides exhibited rapid action (LT₅₀ < 2 hours). The variation in the susceptibility of T. absoluta populations to the phthalides 3 and 4 was low. Neither phthalide presented physiological selectivity for non-target species.

Therefore, the phthalides 3 and 4 are promising molecules, or at least, a starting point for a chemical optimization program leading to formulations for the management of the tomato leafminer. The application of such products should be conducted according to the principles of ecological selectivity.     

Effects of glyphosate on the non-target leaf beetle Cerotoma arcuata (Coleoptera: Chrysomelidae) in field and laboratory conditions

This study aimed to assess the glyphosate application effects on the Cerotoma arcuata Oliver (Coleoptera: Chrysomelidae) population in glyphosate-resistant soybean crops. Field studies were conducted with glyphosate and the insecticide endosulfan to observe the effects of these pesticides on C. arcuata, on its damages in the crop and on the populations of natural enemies in glyphosate-resistant soybean crops. Moreover, the lethal and behavioral sublethal response of C. arcuata to glyphosate and endosulfan was conducted in the laboratory. The results of the field and laboratory experiments showed that glyphosate caused moderate toxicity and high irritability in C. arcuata and that endosulfan caused high toxicity and irritability. Therefore, the direct effect of glyphosate on C. arcuata was negative and does not explain the population increases of this pest in glyphosate-resistant soybean. However, the glyphosate also decreased the density of predators. Thus, the negative effect of glyphosate on the predators may be related to population increases of C. arcuata in glyphosate-resistant soybean crops, however, more studies are needed to better evidence this relationship. This study suggests that glyphosate can impact other non-target organisms, such as herbivorous insects and natural enemies and that the use of this herbicide will need to be carefully stewarded to prevent potential disturbances in beneficial insect communities in agricultural systems.     

Integrated spatiotemporal trends using TRMM 3B42 data for the Upper São Francisco River basin,Brazil

Trend analysis is an important issue for the decision-making processes. Thus, trends of rainfall, consecutive dry days (CDD), and consecutive wet days (CWD) in the Upper São Francisco River basin, Brazil, using daily rainfall data from the Tropical Rainfall Measuring Mission (TRMM) for recent 18 years, were analyzed. Instead of analyzing the trend of one average time series for one specific confidence level, a spatiotemporal analysis over the entire area with 169 continuous time series is done by applying the nonparametric Mann-Kendall and Sen tests for simultaneously 13 confidence levels and a new integrated confidence classification is proposed. The results show that the rainfall has increased during the less rainy periods (from June to October) and has decreased in the rainy periods (from November to May), with the highest and lowest confidence levels, respectively. An analysis of CDD and CWD shows that the number of CDD has decreased, while the number of CWD has increased, which revealed that the dry periods are more frequently interrupted for the period studied.     

Agricultural solid waste for sorption of metal ions,part II: competitive assessment in multielemental solution and lake water

Sugarcane bagasse and hydroponic lettuce roots were used as biosorbents for the removal of Cu(II), Fe(II), Mn(II), and Zn(II) from multielemental solutions and lake water, in batch processes. These biomasses were studied in natura (lettuce roots, NLR, and sugarcane bagasse, NSB) and chemically modified with HNO₃ (lettuce roots, MLR, and sugarcane bagasse, MSB). The results showed higher adsorption efficiency for MSB and either NLR or MLR. The maximum adsorption capacities (q_max) in multielemental solution for Cu(II), Fe(II), Mn(II), and Zn(II) were 35.86, 31.42, 3.33, and 24.07 mg/g for NLR; 25.36, 27.95, 14.06, and 6.43 mg/g for MLR; 0.92, 3.94, 0.03, and 0.18 mg/g for NSB; and 54.11, 6.52, 16.7, and 1.26 mg/g for MSB, respectively. The kinetic studies with chemically modified biomasses indicated that sorption was achieved in the first 5 min and reached equilibrium around 30 min. Sorption of Cu(II), Fe(II), Mn(II), and Zn(II) in lake water by chemically modified biomasses was 24.31, 14.50, 8.03, and 8.21 mg/g by MLR, and 13.15, 10.50, 6.10, and 5.14 mg/g by MSB, respectively. These biosorbents are promising and low costs agricultural residues, and as for lettuce roots, these showed great potential even with no chemical modification.     

<Emphasis Type="Italic">Aporrectodea caliginosa</Emphasis>, a relevant earthworm species for a posteriori pesticide risk assessment: current knowledge and recommendations for culture and experimental design

Ecotoxicological tests with earthworms are widely used and are mandatory for the risk assessment of pesticides prior to registration and commercial use. The current model species for standardized tests is Eisenia fetida or Eisenia andrei. However, these species are absent from agricultural soils and often less sensitive to pesticides than other earthworm species found in mineral soils. To move towards a better assessment of pesticide effects on non-target organisms, there is a need to perform a posteriori tests using relevant species. The endogeic species Aporrectodea caliginosa (Savigny, 1826) is representative of cultivated fields in temperate regions and is suggested as a relevant model test species. After providing information on its taxonomy, biology, and ecology, we reviewed current knowledge concerning its sensitivity towards pesticides. Moreover, we highlighted research gaps and promising perspectives. Finally, advice and recommendations are given for the establishment of laboratory cultures and experiments using this soil-dwelling earthworm species.     

Local knowledge about dugout canoes reveals connections between forests and fisheries

Dugout canoes are traditional boat types made from a single tree trunk. This type of boat can reveal unique connections between forest and fisheries in coastal areas: their construction and the species used depend on the local ecological knowledge of artisans and the plant resources available and are also influenced by the type of fisheries in which the canoe will be used. Our objective was to analyze how dugout canoes are constructed, maintained, and currently used in the central coastal region of Santa Catarina, Brazil. The study emphasizes the interaction between the use of forest resources and artisanal fishing in this coastal environment. The data collected were based on interviews with 30 artisans and participant observation. Schizolobium parahyba (Vell.) Blake, Ocotea porosa (Nees & Mart.) Barroso, Ocotea Aubl../Nectandra Roll. Ex Rottb., and Aspidosperma Mart. & Zucc. are the main taxa used to construct the canoes. Many canoe sizes are used, and based on the boat type, the trunk diameters needed to construct them varies from 0.6 to 2.9 m and trunk heights from 4 to 10 m. Different types of canoe are used according to the type of fishing and especially to the environment conditions. The construction of canoes in the region has decreased due to difficulties in acquiring wood, changes in fishing activities, and reasons related to labor and apprenticeship, all causes related to modernization of the society and urban growth. The knowledge of plant species used can contribute to shape policies to improve forest management. The survival of cultural practices in artisanal fishing communities should be stimulated in sustainable development programs, and it involves maintaining ecological and technical knowledge related to fishing and the plant resources used to manufacture and maintain fishing equipment.     

The application of Geographical Information Systems to determine environmental impact significance

This paper presents a new methodology for impact assessment—SIAM (Spatial Impact Assessment Methodology)—which is based on the assumption that the importance of environmental impacts is dependent, among other things, on the spatial distribution of the effects and of the affected environment. The information generated by the use of Geographical Information Systems (GIS) in impact identification and prediction stages of Environmental Impact Assessment (EIA) is used in the assessment of impact significance by the computation of a set of impact indices. For each environmental component (e.g., air pollution, water resources, biological resources), impact indices are calculated based on the spatial distribution of impacts. A case study of impact evaluation of a proposed highway in Central Portugal illustrates the application of the methodology and shows its capabilities to be adapted to the particular characteristics of a given EIA problem.