Radionuclides, heavy metals and fluorine incidence at Tapira phosphate rocks, Brazil, and their industrial (by) products

Inorganic phosphate fertilizers may contain radionuclides, heavy metals and fluorine. This paper presents the possible environmental hazards from Tapira phosphate rocks and their (by) products (Brazil) utilized as phosphate fertilizers. The activity concentration of 238U, 234U, 226Ra and 40K in Tapira phosphate rocks is within the world range for these rock types. The 232Th activity concentration is higher than the mean reported in phosphate rocks. A value of 2184 nGy h(-1) was obtained for the exposure dose rate in Tapira phosphate deposit area, which is indicative of a high background radiation area. The flotation-separation process causes the incorporation of no more than 9%, 11% and 24% of radionuclides, heavy metals and fluorine, respectively, into the phosphate concentrate. The radionuclides and heavy metals existing in phosphate fertilizers applied in Brazilian crops according to the recommended rates, do not raise their concentration in soils to harmful levels.     

Fine dust filtration using a metal fiber bed

A bed-type filter composed of thin metal alloy fiber was closely examined with dust capturing in cold and hot runs. The investigation of an individual mechanism across the filter bed indicated that the aerated dust could be initially collected by depth filtration, and after a while, surface filtration dominated the overall dust collection. The present metal fiber bed was comparable to the conventional ceramic filters because of its good collection efficiency with low pressure drop. It also showed potential to be used as a prefilter in a diesel exhaust trapping system.     

Comparison of European national legislation efficiency on the reduction of air pollutant emissions

Since 1995, the Institute for Environment and Development in Portugal has obtained >300 stack samples from various point sources of Portuguese industries. A coherent database was made with the collected results. The limit values fixed by several European legal documents consulted, Portuguese, Spanish, French, Italian, and Dutch emission legislation, were applied to the Institute for Environment and Development stack sampling inventory (from 1995 to 2000) to evaluate the efficiency of these standards in promoting the control and reduction of atmospheric pollutants emissions, especially regarding nitrogen oxides, sulfur dioxide, and particulate matter. The conclusion was that the original Portuguese legislation was not restrictive enough and not very efficient regarding emissions reduction. In contrast, the Dutch and Italian legislations are quite restrictive but very efficient concerning emission control for the three pollutants analyzed. One of the outcomes of this study was the publication of a new law in Portugal regulating the emissions of atmospheric pollutants. The strategy of this emissions control law follows the conclusions found in this study including the concept of a mass flow threshold and different approaches depending on source dimension.     

Ecodesign of automotive components making use of natural jute fiber composites

Nowadays, the world faces unprecedented challenges in social, environmental and economical dimensions, in which the industrial design has showed an important contribution with solutions that provide positive answers regarding these problems. In particular, due to its relevance, the automotive industry confronts a moment of crises, and based on the ecodesign of products it has been transforming the challenges in opportunities. In this context, the use of natural fiber composites, produced in developing countries, have presented several social, environmental and economical advantages to design “green” automotive components. Thus, this work through LCA method demonstrates the possibility to use natural fibers through a case study design which investigates the environmental improvements related to the replacement of glass fibers for natural jute fibers, to produce a structural frontal bonnet of an off-road vehicle (Buggy). Results pointed out the advantages of applying jute fiber composites in Buggy enclosures.     

Tolerance to iron accumulation and its effects on mineral composition and growth of two grass species

This study aimed to assess the influence of excess iron on the capacity of accumulation of this heavy metal, mineral composition, and growth of Setaria parviflora and Paspalum urvillei. Seedlings were submitted to 0.009; 1; 2; 4; and 7 mM of Fe-EDTA. In both species there was an increase in the concentration of Fe, Zn, P, and Ca and a decrease in Mn, K, and Mg in the iron plaque. Both species accumulated more iron in roots. In the shoots, S. parviflora showed higher iron content, except at 7 mM. Iron altered the contents of Fe, Cu, K, and Mg in roots, and of Fe, Mn, Zn, N, P, K, Ca, and Mg in shoots. The two species tolerated high iron concentrations and accumulated high content of this element in both shoots and roots. The iron did not reduce their growth. Both species are indicated for studies aiming restoration of iron-contaminated areas.     

CENTRIFUGE MODELING OF ONE-DIMENSIONAL SUBSURFACE CONTAMINATION1

ABSTRACT: One-dimensional contaminant transport through a saturated soil is modeled using a 1.2-m radius geotechnical centrifuge. Small-scale physical modeling in the centrifuge is achieved in relatively short time, at stress distributions that are similar to those experienced in the prototype (actual site). A 0.05 mol/l of sodium chloride solution is used as a contaminant and conductivity cells measure the concentration of the contaminant throughout the porous medium. Scaling analysis for centrifuge modeling and 1-g modeling are briefly discussed and it is concluded that centrifuge modeling simulates the effect of molecular diffusion; however, scaling of the effect of mechanical dispersion may be violated in the centrifuge if the interstitial fluid velocity is high. Centrifuge test results show good agreement with the predicted relationship between the coefficient of hydrodynamic dispersion and the Peclet number using column tests. Centrifuge modeling can be used as a complement of numerical modeling although the effect of mechanical dispersion may be overestimated in the former.     

The Impact of BSE and FMD on Ethics and Democratic Process

The recent crises of BSE and FMD in the United Kingdom have revealed widespread concerns on the part of farmers and consumers about government regulations and handling of animal movements, animal welfare, and food safety. Both crises raised issues of government accountability and the lack of openness in public debate. The issues of democratic process and decision-making were especially strong in relation to the mass slaughter policy of the government to control FMD. This article explores public disquiet about these matters, as expressed through the reports of two public inquiries, and the perceived links between government decision-making and the needs of global agribusiness, to the detriment of family farms and animal welfare. In light of the growing evidence about the environmental and economic costs of agribusiness, the argument is made that strong programs of citizen action, such as the Devon Foot and Mouth Inquiry, that are grounded in an ethical stance on animal welfare can challenge the perspectives of central governments about concepts of cost, efficiency, and safety in agriculture.