A technique for cutting brittle undisturbed lateritic soil block samples

This note describes a technique for cutting undisturbed brittleblock samples into smaller specimens for further geotechnical testing. This technique revealed very useful in dealing with collapsible soils, where the sampling is recommended to be donewith block soil samples. A further use of this technique as an efficient way for sampling collapsible soils is proposed.     

Atmospheric quality and distribution of heavy metals in Argentina employing Tillandsia capillaris as a biomonitor

The atmospheric quality and distribution of heavy metals were evaluated throughout a wide region of Argentina. In addition, the biomonitor performance of Tillandsia capillaris Ruiz & Pav. f. capillaris was studied in relation to the accumulation of heavy metals and to its physiologic response to air pollutants. A sampling area of 50,000 km2 was selected in the central region of the Argentine Republic. This area was subdivided into grids of 25 x 25 km. Pools of T. capillaris, where present, were collected at each intersection point. From each pool three sub-samples were analyzed independently. Furthermore, five replicates were collected at 20% of the points in order to analyze the variability within the site. The content of Co, Cu, Fe, Ni, Mn, Pb and Zn was determined by Atomic Absorption Spectrometry. Chemical-physiological parameters were also determined to detect symptoms of foliar damage. Chlorophylls, phaeophytins, hydroperoxy conjugated dienes, malondialdehyde and sulfur were quantified in T. capillaris. Some of these parameters were used to calculate a foliar damage index. Data sets were evaluated by one-way ANOVA, correlation analysis, principal component analysis and mapping. Geographical distribution patterns were obtained for the different metals reflecting the contribution of natural and anthropogenic emission sources. According to our results it can be inferred that Fe, Mn and Co probably originated in the soil. For Pb, the highest values were found in the mountainous area, which can be attributed to the presence of Pb in the granitic rocks. Ni showed mainly an anthropogenic origin, with higher values found in places next to industrial centers. For Zn the highest values were in areas of agricultural development. The same was observed for Cu, whose presence could be related to the employment of pesticides. The foliar damage index distribution map showed that the central and southeastern zones were the ones where the major damage in the bioindicator was found. The central zone coincides with the city of Córdoba whereas the southeastern area is strictly agricultural, so the high values found there could be related to the use of pesticides.     

Source extraction information from air quality data monitored in an Argentinean steel mill

A statistical analysis of a series of ambient air concentrations of suspended particulate matter (SPM) and NO2 is presented. Measurements were taken at four sites that belong to an Argentinean steel mill and in another site located in its vicinity. The air pollutants were measured during a three-week exploratory sampling. The monitoring sites were selected on the basis of relevant characteristics of the emission sources and the corresponding climatological statistics of the last decade. Suspended particulate matter with aerodynamic diameter of less than 10 microm (PM10) and NO2 were continuously measured at only one site, while 1-hr samples of NO2 and 24-hr samples of total SPM and SO2 were collected at the other sites. The registered concentrations show that SPM was the pollutant of major concern. A first estimate about the nature of the contribution of the different sources of particles and NO2 present in the area was obtained through the statistical analysis of measured concentration data coupled with prevalent meteorological variables.     

Assessment of a Smelter Impact Area Using Surface Soils and Plants

The concentrations of 37 trace elements (Ag, Ba, Be, Cd, Ce, Co, Cr, Cs, Cu, Dy, Er, Ga, Gd, Ge, La, Li, Mo, Nb, Nd, Ni, Pb, Pr, Rb, Sb, Sm, Sn, Sr, Tb, Th, Tl, U, V, W, Y, Yb, Zn and Zr) were determined by ICP-MS in surface soils and plants (Sida rhombifolia) sampled around a lead smelter in Lastenia, Province of Tucuman, NW Argentina. Soil and plant patterns of Pb, Cd, Ag, Zn and Cu demonstrate the effects of pollutant dispersion plumes following the prevalent wind directions. The high element concentrations observed, especially Pb (>5,000 mg/kg), could cause serious environmental problems in areas of close proximity to the smelter. Consequently, measures to assess potential consequences for the local population should be considered to determine if measures to protect the environment are necessary.     

Solid State Reactions of Potato Starch with Urea and Biuret

Reaction of granular potato starch with urea and biuret resulted in the formation of products, which were soluble neither in cold nor boiling water. The net reaction was a monosubstitution of the hydrogen atom in one hydroxyl group in each D-glucose unit of starch with the either CO–NH₂ or CO–NH–CO–NH₂ moiety, respectively. Properties of the products, particularly these with urea, depended on the mode of reaction. Reactions were carried out in the microwave oven as well as with convection heating. The products retained the granular form of starch but a vast majority of granules were damaged. -Amylolysis of those materials revealed that their susceptibility to the enzyme increasing in the order: starch-amylolysis with simultaneous insolubility in water make these products suitable as ruminant fodder and, eventually, biodegradable material.     

Treatment of trinitrotoluene by crude plant extracts

Crude plant extract solutions (spinach and parrotfeather) were prepared and spiked with 2,4,6-trinitrotoluene (TNT) (20 mgl(-1)). 90-h TNT removal by these solutions was compared to controls. Spinach and parrotfeather extract solutions removed 99% and 50% of the initial TNT, respectively; TNT was not eliminated in the controls or in extract solutions where removal activity was deactivated by boiling. A first-order removal constant of 0.052 h(-1) was estimated for spinach extract solutions treating 20 mgl(-1) TNT concentrations, which compared favorably to intact plant removal. Concentration variation was described by Michaelis-Menton kinetics. Detectable TNT degradation products represented only a fraction of the total TNT transformed, and the transformation favored the formation of 4-aminodinitrotoluene. The results indicated that crude plant extracts transform TNT, without the presence of the live plant.     

Radioactivity concentration in liquid and solid phases of scale and sludge generated in the petroleum industry

Scales and sludge generated during oil extraction and production can contain uranium, thorium, radium and other natural radionuclides, which can cause exposure of maintenance personnel. This work shows how the oil content can influence the results of measurements of radionuclide concentration in scale and sludge. Samples were taken from a PETROBRAS unit in Northeast Brazil. They were collected directly from the inner surface of water pipes or from barrels stored in the waste storage area of the E&P unit. The oil was separated from the solids with a Soxhlet extractor by using aguarras at 90+/-5 degrees C as solvent. Concentrations of 226Ra and 228Ra in the samples were determined before and after oil extraction by using an HPGe gamma spectrometric system. The results showed an increase in the radionuclide concentration in the solid (dry) phase, indicating that the above radionuclides concentrate mostly in the solid material.     

Evaluation of compliance with national legislation on emissions in Portugal

More than 13 years after publication of the first air quality laws in Portugal and more than 10 years after the publication of the respective emission limits, it seems appropriate to analyze the degree of compliance by the Portuguese manufacturing industry. Using the data from emission measurements made regularly by the Instituto de Soldadura e Qualidade, the only officially accredited laboratory according to standard ISO 17025, I analyzed a set of approximately 400 sources in terms of compliance with the emission limits regarding total suspended particulates, sulfur dioxide, nitrogen oxides, and volatile organic compounds. I evaluated compliance through a nondimensional parameter and plotted it versus the emission flow rate to derive conclusions: the results indicate that emission limits are generally met regarding sulfur dioxide and nitrogen oxides but not for the other pollutants considered in this study. However, noncompliance occurs mainly for very low emission flow rates, which suggests some alterations in the emission limits, which are being revised at the moment. These alterations will include the exemption of measurements in minor sources.     

Modeling Hydrology in a Small Rocky Mountain Watershed Serving Large Urban Populations1

Abstract: This article describes the development of a calibrated hydrologic model for the Blue River watershed (867 km²) in Summit County, Colorado. This watershed provides drinking water to over a third of Colorado’s population. However, more research on model calibration and development for small mountain watersheds is needed. This work required integration of subsurface and surface hydrology using GIS data, and included aspects unique to mountain watersheds such as snow hydrology, high ground‐water gradients, and large differences in climate between the headwaters and outlet. Given the importance of this particular watershed as a major urban drinking‐water source, the rapid development occurring in small mountain watersheds, and the importance of Rocky Mountain water in the arid and semiarid West, it is useful to describe calibrated watershed modeling efforts in this watershed. The model used was Soil and Water Assessment Tool (SWAT). An accurate model of the hydrologic cycle required incorporation of mountain hydrology‐specific processes. Snowmelt and snow formation parameters, as well as several ground‐water parameters, were the most important calibration factors. Comparison of simulated and observed streamflow hydrographs at two U.S. Geological Survey gaging stations resulted in good fits to average monthly values (0.71 Nash‐Sutcliffe coefficient). With this capability, future assessments of point‐source and nonpoint‐source pollutant transport are possible.     

Ontogenic changes of amino acid composition in planktonic crustacean species

Changes in amino acid composition (AAC) during ontogeny of some planktonic crustacean species commonly found in fresh and brackish coastal waters were compared. For these comparisons two calanoid copepods (Eurytemora velox and Calanipeda aquae-dulcis), two cyclopoid copepods (Diacyclops bicuspidatus odessanus and Acanthocyclops robustus) and two Daphnia (Daphnia pulicaria and Daphnia magna) species were selected. A discriminant analysis was performed to determine whether there were significant differences between the AAC of the different stages of each species. Results show gradual changes in AAC during ontogeny of the copepod species. Calanoids showed the greatest differences in AAC between stages, followed by cyclopoids. Gradual changes in AAC were due to the increase in some amino acids such as alanine, valine, glutamic acid, glycine, arginine, proline and tyrosine from nauplii to adults. The latter showed a remarkable increase in all copepod species. In contrast, Daphnia species showed a relatively constant AAC during development, with only minor changes being detected, and not related with ontogeny. Differences in the physico-chemical variables of the lagoons do not seem to be the cause of copepod ontogenic changes in AAC. Data suggest that AAC differences found between stages of copepod species could indicate a gradual change in diet during the life cycle of these copepods.