Implications of future bioclimatic shifts on Portuguese forests

As climate is an important driver of vegetation distribution, climate change represents an important challenge to forestry. We (1) identify prevailing bioclimatic conditions for 49 relevant forest species in Portugal and (2) assess future shifts under climate change scenarios. We compute two bioclimatic indices (aridity and thermicity) and a new composite index, at ~1 km spatial resolution, and overlap with the species’ current ranges. Locations are based on a digital inventory, while climate parameters for both recent-past (1950–2000) and future climates (2041–2060), under RCP4.5 and RCP8.5, are provided by a multi-model ensemble of climate simulations. Results for future scenarios highlight an overall warming and drying trend. Supramediterranean and mesomediterranean climates will be significantly reduced, while thermomediterranean climates will dramatically increase, from their almost absence in current conditions to an area coverage of ~54 % in 2041–2060 for RCP8.5. There is also a clear shift from hyper-humid and humid to sub-humid and from the latter to semi-arid climates (area coverage of ~13 % in 2041–2060 for RCP8.5). Lower thermomediterranean sub-humid to semi-arid zones will cover the southern half of Portugal. These projections identify the most vulnerable (e.g. Betula pubescens, Quercus pyrenaica and Castanea sativa) and the most adapted (e.g. Quercus suber, Q. rotundifolia, Ceratonia siliqua, Pinus pinea, Quercus coccifera) species in future climates. Current bioclimatic zones associated with Eucalyptus globulus and Pinus pinaster, economically relevant species, will be moderately reduced and relocated. Possible adaptation measures are discussed to improve forest resilience to climate change, while maintaining its economic and environmental benefits.     

Occurrence and behaviour of pharmaceutical compounds in a Portuguese wastewater treatment plant: Removal efficiency through conventional treatment processes

Wastewater treatments can eliminate or remove a substantial amount of pharmaceutical active compounds (PhACs), but there may still be significant concentrations of them in effluents discharged into surface water bodies. Beirolas wastewater treatment plant (WWTP) is located in the Lisbon area and makes its effluent discharges into Tagus estuary (Portugal). The main objective of this study is to quantify a group of 32 PhACs in the different treatments used in this WWTP. Twelve sampling campaigns of wastewater belonging to the different treatments were made in 2013–2014 in order to study their removal efficiency. The wastewaters were analysed by solid phase extraction (SPE) and ultra-performance liquid chromatography coupled with tandem mass detection (UPLC–MS/MS). The anti-diabetics were the most frequently found in wastewater influent (WWI) and wastewater effluent (WWE) (208 and 1.7 μg/L, respectively), followed by analgesics/antipyretics (135 μg/L and < LOQ, respectively), psychostimulants (113 and 0.49 μg/L, respectively), non-steroidal anti-inflammatory drugs (33 and 2.6 μg/L, respectively), antibiotics (5.2 and 1.8 μg/L, respectively), antilipidemics (1.6 and 0.24 μg/L, respectively), anticonvulsants (1.5 and 0.63 μg/L, respectively) and beta blockers (1.3 and 0.51 μg/L, respectively). A snapshot of the ability of each treatment step to remove these target PhACs is provided, and it was found that global efficiency is strongly dependent on the efficiency of secondary treatment. Seasonal occurrence and removal efficiency was also monitored, and they did not show a significant seasonal trend.     

Production of biodiesel from waste frying oils

Waste frying oils transesterification was studied with the purpose of achieving the best conditions for biodiesel production. Transesterification reactions were carried out for 1 h using waste frying oils (WFOs), methanol, and sodium hydroxide as catalyst. In order to determine the best conditions for biodiesel production, a series of experiments were carried out, using methanol/WFO molar ratios between 3.6 and 5.4 and catalyst/WFO weight ratios between 0.2% and 1.0%. For oils with an acid value of 0.42 mg KOH/g, results show that a methanol/WFO ratio of 4.8 and a catalyst/WFO ratio of 0.6% gives the highest yield of methyl esters. Furthermore, an increase in the amount of methanol or catalyst quantity seems to simplify the separation/purification of the methyl esters phase, as showed by a viscosity reduction and an increasing purity to values higher than 98% for methyl esters phase.     

Bulk atmospheric deposition of persistent toxic substances (PTS) along environmental gradients in Brazil

Bulk atmospheric deposition measurements for selected persistent toxic substances (PTS) were performed along environment gradients (urban–suburban–rural–background sites) in Brazil. The aim with this work is to investigate the fate of PTS and their emissions in South America, particularly along environment transects. Bulk sampler systems (polyurethane foams, 1?×?1 m²) were fixed along environment gradients (urban–suburban–rural–background) over summer and winter periods (2005–2007) at sites of different climate zones of Brazil. Organochlorine pesticides (OCs) and polychlorinated biphenyls (PCBs) were analyzed by gas chromatography coupled to electron capture detector (Shimadzu 2010, 20i GC-ECD). Urban sites reported the highest deposition rates for all PTS, ranging from tens to thousands of pictograms per square meter per day. Basically, there were no obvious seasonal differences in deposition rate concentrations for PTS along the urban–suburban–rural–background gradient. Dichlorodiphenyltrichloroethane (DDT) and its metabolites were the OCs most frequently detected at relatively high deposition rate levels (>1,000 pg m^?2 day^?1). Other legacy and current-use pesticides such as hexachlorocyclohexanes, endosulfans, hexachlorcyclobenzine, dieldrin, aldrin, metoxichlor, and chlodanes were also detected at lower deposition rate levels (10–100 pg m^?2 day^?1). PCBs were detected at extremely high deposition rate levels (1,000–10,000 pg m^?2 day^?1) with highest contributions from the tetra-PCBs (PCB-52, PCB-44, PCB-66, PCB-81, and PCB-77) and penta-PCB congeners (PCB-101, PCB-105, PCB-114, PCB-118, and PCB-126). The greatest deposition rate concentrations for total PCBs were mainly detected at urban sites in connection with high population densities. The observed high deposition rate concentrations for PCBs and DDTs at urban sites are probably associated with old PTS stocks emissions. For PCBs in particular, the high levels are strongly associated with local population densities, highlighting the effect of local/regional urban sources on these target PTS. These results are important to show that even though the use of PTS is regulated, the deposition of selected PTS is still impacted by local and regional emissions in Brazil and may be related to the historical and continued emissions from old PTS stocks.     

Toluene vapor capture by activated carbon particles in a dual gas-solid cyclone system

Capturing of odorous compounds such as toluene vapor by a particulate-activated carbon adsorbent was investigated in a gas-solid cyclone, which is one type of mobile beds. The test cyclone was early modified with the post cyclone (PoC) and a spiral flow guide to the vortex finder. The proposed process may contribute to the reduction of gases and dust from industrial exhausts, especially when dealing with a low concentration of odorous elements and a large volume ofdust flow. In this device, the toluene capturing efficiency at a 400 ppm concentration rose up to 77.4% when using activated carbon (AC) particles with a median size of 27.03 microm. A maximum 96% of AC particles could be collected for reuse depending on the size and flow rate. The AC regenerated via thermal treatment showed an adsorption potential up to 66.7% throughout repeated tests.     

Influence of pleat geometry on filter cleaning in PTFE/glass composite filter

A pleated filter bag is often used to treat exhaust gas in many industrial applications, due to its fairly high dust collection efficiency and relatively low pressure drop. This work deals with the optimum pleating geometries of a pleated filter made with a newly developed PTFE/glass composite filter. It was found that pleating geometries, including pleat height and pleat pitch, directly affect the cleaning efficiency. The design index, α, which stands for the ratio of pleat height to pleat pitch, is 1.48 for optimum operation. When the α value was higher than 1.48, the pressure drop across the pleated filter medium increased, resulting in a decreased cleaning interval due to the difficulty of filter cleaning. Therefore, it is necessary that the optimum pleating geometry should be determined by employing the dimensionless parameter, α, in the design of cartridge filters.

Implications: A pleated filter bag is often used to treat exhaust gas in many industrial applications due to its fairly high dust collection efficiency and relatively low pressure drop. The present paper introduces an optimum design configuration to make a pleated filter with newly developed PTFE/glass composite filter media. A dimensionless parameter that is the ratio of pleat height to pleat pitch should be considered to make the best quality pleated filter.     

Physical and Thermal Analysis of the Degradation of Poly(3-Hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-Hydroxybutyrate) Coated Paper in a Constructed Soil Medium

The degradation of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB)) coated brown Kraft paper and its components in a constructed soil environment was investigated. Soil burial tests were carried out over 8 weeks. Weight loss measurements, photographic analysis, environmental scanning electron microscopy (ESEM), dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) were conducted to assess the physical, structural, mechanical and thermal behavior before and after the soil burial test. Paper showed the highest physical degradation and weight loss. With respect to the control samples, the stiffness of the partially degraded samples decreased. The overall crystallinity of the biopolymer and the coated paper was affected significantly by burial. The pure biopolymer’s weight loss was substantially enhanced when coated on paper. This result reveals a possible increased microbial population in the coated paper relative to the pure biopolymer.     

Sociodemographic effects on place bonding

Patterns of amenity migration and recreational home development in much of the USA since the 1990s are changing the local sociodemographic make-up and the relationships formed among people and place. We use the psychological constructs of place attachment, place identity, and place dependence to assess differences in these relationships among new and long-time residents and absentee and local residents in three rural counties in the Inland Northwest. We measured place bonding using data from a mail survey of local (n = 531) and absentee (n = 239) property owners. We compared structural models suggested in the literature on the psychology of place, and found that a two-dimensional model representing place attachment and place identity was appropriate for both local and absentee property owners. Local owners exhibited stronger place attachment and place identity than absentee owners. Place bonding constructs were also substantially less impacted by the total number of years a property owner had resided on his or her property than by the number of months per year they lived on the property. The findings indicate that sociodemographic changes such as those manifested in second-home development may lead to a population that is less emotionally, behaviorally, and cognitively connected to the places in question, while sociodemographic changes from permanent in-migration may have a substantially smaller effect on place bonding.     

Use of statistical tools to evaluate the reductive dechlorination of high levels of TCE in microcosm studies

A large, multi-laboratory microcosm study was performed to select amendments for supporting reductive dechlorination of high levels of trichloroethylene (TCE) found at an industrial site in the United Kingdom (UK) containing dense non-aqueous phase liquid (DNAPL) TCE. The study was designed as a fractional factorial experiment involving 177 bottles distributed between four industrial laboratories and was used to assess the impact of six electron donors, bioaugmentation, addition of supplemental nutrients, and two TCE levels (0.57 and 1.90 mM or 75 and 250 mg/L in the aqueous phase) on TCE dechlorination. Performance was assessed based on the concentration changes of TCE and reductive dechlorination degradation products. The chemical data was evaluated using analysis of variance (ANOVA) and survival analysis techniques to determine both main effects and important interactions for all the experimental variables during the 203-day study. The statistically based design and analysis provided powerful tools that aided decision-making for field application of this technology. The analysis showed that emulsified vegetable oil (EVO), lactate, and methanol were the most effective electron donors, promoting rapid and complete dechlorination of TCE to ethene. Bioaugmentation and nutrient addition also had a statistically significant positive impact on TCE dechlorination. In addition, the microbial community was measured using phospholipid fatty acid analysis (PLFA) for quantification of total biomass and characterization of the community structure and quantitative polymerase chain reaction (qPCR) for enumeration of Dehalococcoides organisms (Dhc) and the vinyl chloride reductase (vcrA) gene. The highest increase in levels of total biomass and Dhc was observed in the EVO microcosms, which correlated well with the dechlorination results.     

Metal contamination of soils and plants associated with the glass industry in North Central India: prospects of phytoremediation

Introduction  

The effect of the glass industry on urban soil metal characterization was assessed in the area of Firozabad, India. A comprehensive profile of metal contamination was obtained in five zones each containing five specific sites.