Model-based prediction of long-term leaching of contaminants from secondary materials in road constructions and noise protection dams

In this study, contaminant leaching from three different secondary materials (demolition waste, municipal solid waste incineration ash, and blast furnace slag) to groundwater is assessed by numerical modeling. Reactive transport simulations for a noise protection dam and a road dam (a typical German autobahn), in which secondary materials are reused as base layers, were performed to predict the breakthrough of a conservative tracer (i.e., a salt) and sorbing contaminants (e.g., PAHs like naphthalene and phenanthrene or heavy metals) at the groundwater table. The dam constructions have a composite architecture with soil covers in inclined layers and distinct contrasts in the unsaturated hydraulic properties of the used materials. Capillary barrier effects result in strong spatial variabilities of flow and transport velocities. Contaminant breakthrough curves at the groundwater table show significant tailing due to slow sorption kinetics and a wide distribution of travel times. While conservative tracer breakthrough depends primarily on subsoil hydraulic properties, equilibrium distribution coefficients and sorption kinetics represent additional controlling factors for contaminant spreading. Hence, the three secondary materials show pronounced differences in the temporal development of leached contaminant concentrations with consequences for breakthrough times and peak concentrations at the groundwater table. Significant concentration reductions due to dispersion occur only if the source concentrations decrease significantly prior to the arrival of the contaminant at the groundwater table. Biodegradation causes significant reduction of breakthrough concentrations only if flow velocities are low.     

Climate dynamics and extreme precipitation and flood events in Central Europe

Past changes and possible future variations in the nature of extreme precipitation and flood events in Central Europe and the Alpine region are examined from a physical standpoint. An overview is given of the following key contributory physical processes: (1) the variability of the large-scale atmospheric flow and the associated changes of the North-Atlantic storm track; (2) the feedback process between climate warming and the water cycle, and in particular the potential for more frequent heavy precipitation events; and (3) the catchment-scale hydrological processes associated with variations in major river flooding events and that are related to land-use changes, river training measures, and shifts in the proportion of rain to snowfall. In this context an account is provided of the possible future forecasting and warning methodologies based upon high-resolution weather prediction and runoff models. Also consideration is given to the detectability of past (future) changes in observed (modeled) extreme events. It is shown that their rarity and natural fluctuation largely impedes a detection of systematic variations. These effects restrict trend analysis of such events to return periods of below a few months. An illustration using daily precipitation from the Swiss Alps does yield evidence for pronounced trends of intense precipitation events (return period 30 days), while trends of stronger event classes are not detectable (but nevertheless can not be excluded). The small detection probability for extreme events limits possible mitigation of future damage costs through an abatement of climate change alone, and points to the desirability of developing improved early forecasting/warning systems as an additional no-regret strategy. This revised version was published online in July 2006 with corrections to the Cover Date.     

Teil V: Bewertung landwirtschaftlich-industrieller Stoffströme

Agricultural and industrial production chains as product lines are connected and their assessment is performed for a varnish based on linseed oil that is almost completely composed of renewable raw materials. Using a production line analysis, the ecological and social effects of the production are assessed, and different assessment techniques for ecological assessment are used as well. The life cycle inventory results from a material flow analysis including pre-production chains. For optimisation, a scenario of conventional agricultural linseed oil production against ecologically produced linseed oil is assessed. All assessment methods identify the same aspect of the product as the most important: The content of volatile organic compounds (VOC), that are released during usage. Further problems such as waste in the oil mill, emittance of acidic substances (mostly NO_x) from burning and heavy metals from tinplate production for containers are identified only from one or another of the assessment methods, a feature which stresses the influence on results from the choice of method. All methods prefer the ecological production of linseed, but the significance regarding the system boundaries is low (0.6% UBP, 1.7% Eco-indicator) due to dominating VOC-emissions. The use of material flow analyses in LCA is possible for agricultural production, especially seamless connection is provided between the different production steps. Also parameterisation is easy so that the defining of scenarios is efficient and transparent.     

移动性估算:德国联邦铁路协会和WWF-Deutschland的工具

1999年10月,在波恩召开的联合国气候会议上,德国的环境机构WWF-Deutschland(世界野生生物自然基金会德国分会)和德国联邦铁路(Deutsche Bahn)发表了名为<客货运输的移动性估算——对德国交通体系的比较思考>的研究报告,其目的就是对铁路、公路、航空和内陆水运的出行次数、成本以及环境影响进行比较研究.     

Quinones in cockchafers: additional function of a sex attractant as an antimicrobial agent

Summary. Females of the forest cockchafer, Melolontha hippocastani Fabr. (Coleoptera: Scarabaeidae, Melolonthinae), are known to produce toluquinone and 1,4-benzoquinone. The latter component has been shown in our earlier studies to act as a sex attractant that enhances synergistically the attraction of males towards plant volatiles induced by feeding females. Analyses of whole body extracts from adults and grubs (L3) of M. hippocastani by coupled gas chromatography--mass spectrometry revealed the presence of 1,4-benzoquinone and toluquinone also in males and larvae. Quantitative analyses showed that extracts from females contained significantly more of 1,4-benzoquinone and toluquinone than extracts from males. Remarkably, extracts from grubs contained significantly higher amounts of both compounds than extracts from females. Inhibition assays using Escherichia coli, Saccharomyces cerevisiae, and the entomopathogenic fungi Metarhizium anisopliae and Beauveria brongniartii revealed inhibitory effects of 1,4-benzoquinone and toluquinone against all tested microorganisms. However, the amounts necessary for inhibition of entomopathogenic fungi and S. cerevisiae in the laboratory assay were higher than those found in the extracts from M. hippocastani.     

Balancing between mutualism and exploitation: the symbiotic interaction between Lasius ants and aphids

Nests of Lasius niger (L.) ants were given varied food regimens to test whether their behaviour towards an aphid partner, Aphis fabae (Scop.), changed with alternative food supplies. Honeydew collection and predation on aphids were measured by video monitoring the movement of ants between their nest and an aphid aggregation. Data collected from the aphid aggregations enabled comparisons between remaining aphid biomass and between the tending intensities of the ants. I tested how ant behaviour was influenced by their access to alternative prey and sugar. The results showed that ants accepted a honey solution as a substitute for the honeydew produced by aphids. Ants not only attended their aphid partners, but also preyed on them. The average predation rate increased eightfold when ants were offered the alternative of sugar, whereas alternative prey had no significant effect. In contrast, ant-tending intensity decreased with alternative sugar whereas alternative prey elicited no effect.     

Re-construction of the shut-down PM10 monitoring stations for the reliable assessment of PM10 in Berlin using fuzzy modelling and data transformation

A dense monitoring network is vital for the reliable assessment of PM10 in different parts of an urban area. In this study, a new idea is employed for the re-construction of the 20 shut-down PM10 monitoring stations of Berlin. It endeavours to find the non-linear relationship between the hourly PM10 concentration of both the still operating and the shut-down PM10 monitoring stations by using a fuzzy modelling technique, called modified active learning method (MALM). In addition, the simulations were performed by using not only raw PM10 databases but also log-transformed PM10 databases for skewness reduction. According to the results of hourly PM10 simulation (root mean square error about 13.0 μg/m³, correlation coefficient 0.88), the shut-down stations have been appropriately simulated and the idea of dense monitoring network development by the re-construction of the shut-down stations was realised. The results of simulations using raw and log-transformed databases showed that data transformation has no significant effect on the performance of MALM in the simulation of shut-down PM10 stations. By the combination of the 11 still operating stations and the 20 re-constructed stations, a dense monitoring network was generated for Berlin and was utilised for the calculation of the reliable monthly and mean annual PM10 concentration for five different PM10 zones in Berlin (the suburban-background, urban-background, urban-traffic, rural-background and suburban-traffic areas). The results showed that the mean annual concentration of PM10 at the five zones increased by about 13.0% in 2014 (26.3 μg/m³) in comparison with 2013 (23.3 μg/m³). Furthermore, the mean annual concentration of PM10 in the traffic lanes of the suburban (2013 25.0 μg/m³, 2014 26.9 μg/m³) and urban (2013 27.7 μg/m³, 2014 31.3 μg/m³) areas is about 14 and 20% higher than the PM10 concentration of suburban-background (2013 21.3 μg/m³, 2014 24.5 μg/m³) and urban-background (2013 23.0 μg/m³, 2014 26.1 μg/m³) areas, respectively.     

Soil criteria to protect terrestrial wildlife and open-range livestock from metal toxicity at mining sites

Thousands of hard rock mines exist in the western USA and in other parts of the world as a result of historic and current gold, silver, lead, and mercury mining. Many of these sites in the USA are on public lands. Typical mine waste associated with these sites are tailings and waste rock dumps that may be used by wildlife and open-range livestock. This report provides wildlife screening criteria levels for metals in soil and mine waste to evaluate risk and to determine the need for site-specific risk assessment, remediation, or a change in management practices. The screening levels are calculated from toxicity reference values based on maximum tolerable levels of metals in feed, on soil and plant ingestion rates, and on soil to plant uptake factors for a variety of receptors. The metals chosen for this report are common toxic metals found at mining sites: arsenic, cadmium, copper, lead, mercury, and zinc. The resulting soil screening values are well above those developed by the US Environmental Protection Agency. The difference in values was mainly a result of using toxicity reference values that were more specific to the receptors addressed rather than the most sensitive receptor.