COS,CS2 and SO2 in aluminium smelter exhaust

Measurements of carbonyl sulfide (COS) and carbondisulfide (CS₂) were carried out on samples drawn from a smoke stack of an aluminium smelter. Volume mixing ratios of 6 ppm COS and 0.1 ppm CS₂ were measured for gases from the electrolysis unit that had previously passed an Al₂O₃ fluid bed reactor and electrostatic precipitators. Specific emissions of 1.6 kg COS and 0.03 kg CS₂ per ton of primary aluminium were found. Extrapolating from this particular smelter’s conditions to a world mix specific COS emissions of about 4 kg/t(Al) are calculated resulting in emissions of annually 0.08 Tg COS into the atmosphere due to electrolytic aluminium production in 1995. Besides the photochemical conversion of anthropogenic CS₂ aluminium production is established to be the second major industrial source of COS probably exceeding automotive tire wear’s and coal combustion’s contributions.     

Monitoring PAHs in the Brisbane River and Moreton Bay, Australia, using semipermeable membrane devices and EROD activity in yellowfin bream, Acanthopagrus australis

Two water quality monitoring strategies designed to sample hydrophobic organic contaminants have been applied and evaluated across an expected concentration gradient in PAHs in the Moreton region. Semipermeable membrane devices (SPMDs) that sequester contaminants via passive diffusion across a membrane were used to evaluate the concentration of PAHs at four and five sites in spring and summer 2001/2002, respectively. In addition, induction of hepatic cytochrome P4501, EROD activity, in yellowfin bream, Acanthopagrus australis, captured in the vicinity of SPMD sampling sites following deployment in summer was used as a biomarker of exposure to PAHs and related chemicals. SPMDs identified a clear and reproducible gradient in PAH contamination with levels increasing from east to west in Moreton Bay and upstream in the Brisbane River. The highest PAH concentrations expressed as B(a)P-toxicity equivalents (TEQs) were found in urban areas, which were also furthest upstream and experienced the least flushing. Cytochrome P4501 induction in A. australis was similar at all sites. The absence of clear trends in EROD activity may be attributable to factors not measured in this study or variable residency time of A. australis in contaminated areas. It is also possible that fish in the Moreton region are displaying enzymatic adaptation, which has been reported previously for fish subjected to chronic exposure to organic contaminants. These potential interferences complicate interpretation of EROD activity from feral biota. It is, therefore, suggested that future monitoring combine the two methods by applying passive sampler extracts to in vitro EROD assays.     

Deposition, Verteilung sowie Bedeutung für den Menschen und sein Nahrungsnetz

Since the introduction of automotive exhaust catalysts in 1984, an intensive discussion started about the emission of platinum group metals and their effect on mankind and the environment. Several platinum compounds are known to be potent sensitizers, even at very small doses. In spite of both the scientific and public interest in this important field, the collection and coordination of scientific research and its conclusions continues to be a lacking. The present results from analytical chemistry, ecology, toxicology and occupational medicine are summarized here. This state of the art indicates the great need for further investigations concerning especially the assessment of emission sources and bioavailability studies for platinum as well as palladium and rhodium.     

Untersuchungen zur Aufnahme von HCB und Pyren durch den KompostwurmEisenia fetida und ausgewählte Regenwurmwildarten

The main issues of the studies described were the validation of a test design for the assessment of the bioaccumulation potential of environmental pollutants and the applicability ofEisenia fetida as a model-organism and artificial soil (OECD) as a standard test substrate. The test organisms used wereE. fetida of our own breeding stock andAllolobophora caliginosa, Allolobophora chlorotica, Allolobophora longa and Lumbricus rubellus sampled from a field site. Test soils used were the artificial soil (OECD) and a BBA field soil. Soils were each contaminated with 10 mg HCB and Pyrene per soil dry-weight. Within the test period of 4 weeks, samples were taken weekly for residue analysis in the worms and soils. Bioaccumulation factors (AF) calculated forE. fetida and the free-living species were in the range of 10–17 (HCB) and 0.9–1.7 (Pyrene) depending on the soil used. By re-calculation of the concentrations in soil to concentrations in soil water, the resulting bioconcentration factors are compared with published BCF values determined from QSAR’s of other worm species and fresh water fish. It could be concluded that the existing earthworm tests (OECD 1984, ISO 1998) represent an appropriate design for testing the bioconcentration potential of chemicals in soil.     

Monitoring the levels of brominated and organophosphate flame retardants in passenger cars: Utilisation of car air filters as active samplers

Filters in residential and office air conditioning(A/C) systems have been used as sampling devices for monitoring different pollutants.However,cabin air filters(CAFs) in the A/C system of passenger cars have not been utilised for this purpose.In this study,we collected22 used CAFs from passenger cars in Hanoi,Vietnam to analyse for 8 polybrominated diphenyl ethers(PBDEs) and 10 organophosphate esters(OPEs).All the analytes were detected in more than 50% of samples with the exception of BDE153 and BDE154.The average concentrations of ∑_(10)OPEs and ∑_8 BDEs in the captured dust were 2600 and 40 ng/g,respectively with Tris(1-chloro-2-propyl) phosphate(TCIPP) and BDE209 as the dominant congener in OPE and BDE groups,respectively.CAFs are a potential tool to qualitatively assess the levels of semi-volatile chemicals in suspended dust in cars as a screening step for exposure assessment of those chemicals.     

Thriving at work: A meta‐analysis

Thriving at work refers to a positive psychological state characterized by a joint sense of vitality and learning. On the basis of Spreitzer and colleagues' model, we present a comprehensive meta‐analysis of antecedents and outcomes of thriving at work (K = 73 independent samples, N = 21,739 employees). Results showed that thriving at work is associated with individual characteristics, such as psychological capital (r_c = .47), proactive personality (r_c = .58), positive affect (r_c = .52), and work engagement (r_c = .64). Positive associations were also found between thriving at work and relational characteristics, including supportive coworker behavior (r_c = .42), supportive leadership behavior (r_c = .44), and perceived organizational support (r_c = .63). Moreover, thriving at work is related to important employee outcomes, including health‐related outcomes such as burnout (r_c = ?.53), attitudinal outcomes such as commitment (r_c = .65), and performance‐related outcomes such as task performance (r_c = .35). The results of relative weights analyses suggest that thriving exhibits small, albeit incremental predictive validity above and beyond positive affect and work engagement, for task performance, job satisfaction, subjective health, and burnout. Overall, the findings of this meta‐analysis support Spreitzer and colleagues' model and underscore the importance of thriving in the work context.     

Minimising the regeneration heat duty of post-combustion CO2 capture by wet chemical absorption: The misguided focus on low heat of absorption solvents

An ideal solvent for CO₂ capture by chemical absorption has to meet a number of requirements, such as high CO₂ capacity, high rate of reaction, low costs, low corrosive behaviour, low degradation and low vapour pressure; above all, it has to show a low regeneration heat duty. This heat can be approximated as the sum of three terms: the sensible heat to raise the solvent from absorber to desorber temperature, the heat of evaporation required to produce the stripping steam in the reboiler, and the heat necessary to desorb the CO₂ from the solution (heat of absorption).Many solvent screening studies focus almost exclusively on solvents that show a low heat of absorption. In these studies, the strong dependence of the three contributors to the overall regeneration heat duty on the chosen process parameters and on one another are often neglected.This work explains why the focus on solvents with a low heat of absorption, without considering the overall process, is not sufficient in quantifying the energy performance of alternative solvents. By using thermodynamic interrelations and underpinned by process simulations it is shown that operating parameters of the process, in particular the desorber pressure, must be taken into consideration in the evaluation of new solvents.