Comprehensive study of endocrine disrupting compounds using grab and passive sampling at selected wastewater treatment plants in South East Queensland, Australia

Chemical (gas chromatography-mass spectrometry, GC-MS) and biological (E-Screen assay) analyses were used to determine the concentrations of 15 endocrine disrupting compounds (EDCs) and estrogen equivalent (EEq) in grab and passive samples from five municipal wastewater treatment plants (WWTPs) in South East Queensland, Australia. EEq concentrations derived by E-Screen assays for the grab samples were between 108-356 ng/L for the influents and < 1-14.8 ng/L for the effluents with the exception of one effluent sample which was at 67.8 ng/L EEq. The EDC concentrations and EEq values for the passive samples were several times lower than those of the grab samples: a decrease probably caused by, but not limited to biofouling, low flow rate, biodegradation and temperature which can progressively reduce the uptake of compounds into the sampler. At this stage, grab sampling is the most reliable method for field monitoring; nevertheless, passive sampler is a useful sampling tool but the method requires more research to ensure that the information obtained can be interpreted appropriately. Although alkylphenols and phthalates were detected at higher concentrations in the wastewater samples as compared to natural hormones, the environmental risk may be negligible as their estrogenic potencies are several orders of magnitude lower than that of the natural estrogens. In most wastewater samples, the natural estrogens contributed to 60% or more of the EEq value. Removal efficacy of most estrogenic and xenoestrogenic compounds from the conventional activated sludge or biological nutrient removal (BNR) WWTPs monitored in this study was in the range of 80-> 99%. The efficiency of the WWTPs in removing estrogenic activity was > 95%. The EEqs of the E-Screen and those calculated from the results of extensive chemical analyses using the estradiol equivalency factors were comparable for most of the WWTPs samples.     

Mercury removal from incineration flue gas by organic and inorganic adsorbents

Experiments were performed to investigate various adsorbents for their mercury removal capabilities from incineration flue gases. Four different materials were tested; Zeolite, Bentonite, activated carbon (AC), and wood char. Real incineration off-gas and in-lab simulated combustion flue gases (N2 + Hg) were used. Three cylindrical-shaped sorbent columns with 5 cm in diameter and 20 cm in length were used. The gas flow rate was fixed at 660 l/h at all times. Concentrations of NO, CO, O2, CO2, SO2, H2O, HCl, and mercury were continuously monitored. Mercury removal efficiencies of natural Zeolite and Bentonite were found to be much lower than those of the referenced AC. Amount of Hg removed were 9.2 and 7.4 microg/g of Zeolite and Bentonite, respectively. Removal efficiencies of each layer consisted of inorganic adsorbents were no higher than 7%. No significant improvement was observed with sulfur impregnation onto the inorganic adsorbents. Organic adsorbents (wood char and AC) showed much higher mercury removal efficiencies than those of inorganic ones (Zeolite and Bentonite). Mercury removal efficiency of wood char reached over 95% in the first layer, showing almost same effectiveness as AC which currently may be the most effective adsorbents for mercury. Amount of mercury captured by wood char was approximately 0.6 mg/g of wood char, close to the amount captured by AC tested in this study. Hence, wood char, made from the waste woods through a gasification process, should be considered as a possible alternative to relatively expensive AC.     

Mobilität von Nitroaromaten im Sandstein infolge Schwefelsäureeintrag zur Uranlaugung

As a result of former in situ leaching activities with sulfphuric acid, nitroaromatic compounds have invaded into cenomanian and turonian sandstone aquifers and mining waters in parts of the uranium mining of Königstein, Germany (Saxony). In the mining area contamination levels of nitrobenzene, mononitrotoluene and dinitrotoluene lead to a partial excess in the drining water guide values. For environmental protection, control and remediation efforts by flooding, more knowledge about contaminant mobility in sandstone, and in intercalated clays and silts, is demanded. A selected experimental area has been flooded to realize and study transport processes under real mining conditions. In this work, we have examined the mobilization of nitroaromatic compounds by flooding waters. The interactions between the nitroaromatic compounds, which are dissolved in the mining water, and the host rocks are discussed. The existing data for strata of varying lithologic conditions suggest that the sorption processes of the compounds investigated are negligible in pure sandstone aquifer layers and significant in the lithologic conditions with a complex mixture of mudstone, siltstone and clay. Several lithologic conditions are demonstrated in contaminant sinks and sources caused by adsorption processes and mobilization of newly connected stagnant pore waters.     

Towards the harmonization of water-related policies for managing drought risks across the EU

Drought is recognized as a major issue in the EU, particularly in the Mediterranean region, posing risks to the environment as well as to local and regional economies. The EU policy on water management is continuously evolving, particularly in relation to water scarcity and drought. Starting with the Water Framework Directive (2000/60/EC), which sets the general policy framework for water management across the EU, the EC Communication on Water Scarcity and Drought COM(2007) 414 final set the priorities for managing water scarcity and drought risks. Three follow-up reports (COM(2008) 875 final, COM(2010) 228 final and COM(2011) 133) highlighted achievements and yearly progress within the context of the implementation of the Water Framework Directive, whereas guidance has further been provided through the issue of Technical Reports (e.g. the EC Water Scarcity Drafting Group Technical Report 2008–023 on Drought Management, Including agricultural, drought indicators and climate change aspects). The 2012 EU Water Review (“Blue Print for Safeguarding European Waters” will assess achievements and identify further requirements towards long-term sustainable water use across the EU. However, a harmonized approach on drought risk management at the EU level is still lacking, whereas drought risk in several countries and regions has not been yet fully integrated in water management and relevant sectoral policies.This paper focuses on a proposed paradigm shift from crisis to risk management, which is currently gaining ground as a means of reducing societal vulnerability to droughts. The paper underlines the importance of engaging into risk assessment and management practices and identifies policy gaps and requirements for further improvement of the drought management policy framework at all levels of governance: at the EU, at the national and at the river basin and regional levels.     

A comparative study on arsenic and humic substances in alluvial aquifers of Bengal delta plain (NW Bangladesh), Chianan plain (SW Taiwan) and Lanyang plain (NE Taiwan): implication of arsenic mobilization mechanisms

Humic substances in groundwater and aquifer sediments from the arsenicosis and Blackfoot disease (BFD) affected areas in Bangladesh (Bengal delta plain) and Taiwan (Lanyang plain and Chianan plain) were characterized using fluorescence spectrophotometry and Fourier transform infrared (FT-IR) spectroscopy. The results demonstrate that the mean concentration of As and relative intensity of fluorescent humic substances are higher in the Chianan plain groundwater than those in the Lanyang plain and Bengal delta plain groundwater. The mean As concentrations in Bengal delta plain, Chianan plain, and Lanyang plain are 50.65 μg/l (2.8–170.8 μg/l, n = 20), 393 μg/l (9–704 μg/l, n = 5), and 104.5 μg/l (2.51–543 μg/l, n = 6), respectively. Average concentrations and relative fluorescent intensity of humic substances in groundwater are 25.381 QSU (quinine standard unit) and 17.78 in the Bengal delta plain, 184.032 QSU and 128.41 in the Chianan plain, and 77.56 QSU and 53.43 in the Lanyang plain. Moreover, FT-IR analysis shows that the humic substances extracted from the Chianan plain groundwater contain phenolic, alkanes, aromatic ring and amine groups, which tend to form metal carbon bonds with As and other trace elements. By contrast, the spectra show that humic substances are largely absent from sediments and groundwater in the Bengal delta plain and Lanyang plain. The data suggest that the reductive dissolution of As-adsorbed Mn oxyhydroxides is the most probable mechanism for mobilization of As in the Bengal delta plain. However, in the Chianan plain and Lanyang plain, microbially mediated reductive dissolution of As-adsorbed amorphous/crystalline Fe oxyhydroxides in organic-rich sediments is the primary mechanism for releasing As to groundwater. High levels of As and humic substances possibly play a critical role in causing the unique BFD in the Chianan plain of SW Taiwan.     

An adaptive plan for prioritizing road sections for fencing to reduce animal mortality

Mortality of animals on roads is a critical threat to many wildlife populations and is poised to increase strongly because of ongoing and planned road construction. If these new roads cannot be avoided, effective mitigation measures will be necessary to stop biodiversity decline. Fencing along roads effectively reduces roadkill and is often used in combination with wildlife passages. Because fencing the entire road is not always possible due to financial constraints, high-frequency roadkill areas are often identified to inform the placement of fencing. We devised an adaptive fence-implementation plan to prioritize road sections for fencing. In this framework, areas along roads of high, moderate, and low levels of animal mortality (respectively, roadkill hotspots, warmspots, and coldspots) are identified at multiple scales (i.e., in circles of different diameters [200–2000 m] in which mortality frequency is measured). Fence deployment is based on the relationship between the amount of fencing being added to the road, starting with the strongest roadkill hotspots, and potential reduction in road mortality (displayed in mortality-reduction graphs). We applied our approach to empirical and simulated spatial patterns of wildlife–vehicle collisions. The scale used for analysis affected the number and spatial extent of roadkill hot-, warm-, and coldspots. At fine scales (e.g., 200 m), more hotspots were identified than at coarse scales (e.g., 2000 m), but combined the fine-scale hotspots covered less road and less fencing was needed to reduce road mortality. However, many short fences may be less effective in practice due to a fence-end effect (i.e., animals moving around the fence more easily), resulting in a trade-off between few long and many short fences, which we call the FLOMS (few-long-or-many-short) fences trade-off. Thresholds in the mortality-reduction graphs occurred for some roadkill patterns, but not for others. Thresholds may be useful to consider when determining road-mitigation targets. The existence of thresholds at multiple scales and the FLOMS trade-off have important implications for biodiversity conservation.     

Process safety challenges for SMEs in China

While process safety regulations and standards have been in place in western countries for more than two decades, China has only recently started to officially embrace these issues with the adoption of its Process Safety Management (PSM) regulation AQ/T 3034-2010 (SAWS, 2010). However, compliance with this regulatory framework requires substantial resources and may therefore appear too complex to be efficiently implemented by small and medium sized enterprises (SMEs) in the chemical sector. This is of particular relevance as about 99% of chemical companies in China are SMEs, accounting for more than 80% of all chemical accidents. To address this issue, additional local regulations and planning activities related to process safety have been implemented in China, including the establishment of hundreds of chemical industry parks. Some of the process safety problems faced by chemical industry parks are identified and discussed in this paper. To help solve these problems, UNEP's “Responsible Production approach for Chemical Hazards Management along the Value-Chain” is introduced in this paper and suggested as a simplified PSM approach targeted specifically at SMEs which, regardless of handling hazardous chemicals in their daily operations, may not have the knowledge or capacity to efficiently implement PSM and may not fall in the scope of the PSM regulation AQ/T 3034-2010. By introducing PSM to SMEs in a more manageable way, relevant steps can be progressively implemented by companies towards full compliance with the current regulatory framework, contributing to increased safety in chemical industry parks in China.