Tissue heavy metal concentrations of stranded California sea lions (Zalophus californianus) in Southern California

Concentrations of nine heavy metals (As, Cd, Cu, Fe, Hg, Pb, Mn, Mo and Zn) were determined in the hepatic and renal tissues of 80 stranded California sea lions (Zalophus californianus). Significant age-dependant increases were observed in liver and kidney concentrations of cadmium and mercury, and renal zinc concentrations. Hepatic iron concentrations were significantly higher in females than males. Animals with suspected domoic acid associated pathological findings had significantly higher concentrations of liver and kidney cadmium; and significantly higher liver mercury concentrations when compared to animals classified with infectious disease or traumatic mortality. Significantly higher hepatic burdens of molybdenum and zinc were found in animals that died from infectious diseases. This is the largest study of tissue heavy metal concentrations in California sea lions to date. These data demonstrate how passive monitoring of stranded animals can provide insight into environmental impacts on marine mammals.     

Determination of the potential for release of mercury from combustion product amended soils: Part 1--Simulations of beneficial use

This paper describes a project that assessed the potential for mercury (Hg) release to air and water from soil amended with combustion products to simulate beneficial use. Combustion products (ash) derived from wood, sewage sludge, subbituminous coal, and a subbituminous coal-petroleum coke mixture were added to soil as agricultural supplements, soil stabilizers, and to develop low-permeability surfaces. Hg release was measured from the latter when intact and after it was broken up and mixed into the soil. Air-substrate Hg exchange was measured for all materials six times over 24 hr, providing data that reflected winter, spring, summer, and fall meteorological conditions. Dry deposition of atmospheric Hg and emission of Hg to the atmosphere were both found to be important fluxes. Measured differences in seasonal and diel (24 hr) fluxes demonstrated that to establish an annual estimate of air-substrate flux from these materials data on both of these time steps should be collected. Air-substrate exchange was highly correlated with soil and air temperature, as well as incident light. Hg releases to the atmosphere from coal and wood combustion product-amended soils to simulate an agricultural application were similar to that measured for the unamended soil, whereas releases to the air for the sludge-amended materials were higher. Hg released to soil solutions during the Synthetic Precipitation Leaching Procedure for ash-amended materials was higher than that released from soil alone. On the basis of estimates of annual releases of Hg to the air from the materials used, emissions from coal and wood ash-amended soil to simulate an agricultural application could simply be re-emission of Hg deposited by wet processes from the atmosphere; however, releases from sludge-amended materials and those generated to simulate soil stabilization and disturbed low-permeability pads include Hg indigenous to the material.     

Air-surface exchange of mercury with soils amended with ash materials

Air-surface exchange of mercury (Hg) was measured from soil low in Hg (0.013 mg/kg) amended with four different ash materials: a wood ash containing -10% coal ash (0.070 mg/kg Hg), a mixture of two subbituminous coal fly ashes (0.075 mg/kg Hg), a subbituminous coal ash containing -10% petroleum coke ash (1.2 mg/kg Hg), and an ash from incinerated municipal sewage sludge (4.3 mg/kg Hg) using a dynamic flux chamber. Ash was added to soil to simulate agricultural supplements, soil stabilization, and pad layers used in livestock areas. For the agricultural amendment, -0.4% ash was well mixed into the soil. To make the stabilized soil that could be used for construction purposes, -20% ash was mixed into soil with water. The pad layer consisted of a wetted 1-cm layer of ash material on the soil surface. Diel trends of Hg flux were observed for all of the substrates with significantly higher Hg emissions during the day and negligible flux or deposition of Hg during the night. Hg fluxes, which were measured in the summer months, were best correlated with solar radiation, temperature, and air O3 concentrations. Mean Hg fluxes measured outdoors for unamended soils ranged from 19 to 140 ng/m2 day, whereas those for soil amended with ash to simulate an agricultural application ranged from 7.2 to 230 ng/m2 day. Fluxes for soil stabilized with ash ranged from 77 to 530 ng/m2 day and for soil with pads constructed of ash ranged from -50 to 90 ng/m2 day. Simple analytical tests (i.e., total Hg content, synthetic precipitation leaching procedure, heating, and indoor gas-exchange experiments) were performed to assess whether algorithms based on these tests could be used to predict Hg fluxes observed outdoors using the flux chamber. Based on this study, no consistent relationships could be developed. More work is needed to assess long-term and seasonal variations in Hg flux from (intact and disturbed) substrates before annual estimates of emissions can be developed.     

Validation of the inhalable dust algorithm of the Advanced REACH Tool using a dataset from the pharmaceutical industry

As it is often difficult to obtain sufficient numbers of measurements to adequately characterise exposure levels, occupational exposure models may be useful tools in the exposure assessment process. This study aims to refine and validate the inhalable dust algorithm of the Advanced REACH Tool (ART) to predict airborne exposure of workers in the pharmaceutical industry. The ART was refined to reflect pharmaceutical situations. Largely task based workplace exposure data (n = 192) were collated from a multinational pharmaceutical company with exposure levels ranging from 5 × 10(-5) to 12 mg m(-3). Bias, relative bias and uncertainty around geometric mean exposure estimates were calculated for 16 exposure scenarios. For 12 of the 16 scenarios the ART geometric mean exposure estimates were lower than measured exposure levels with on average, a one-third underestimation of exposure (relative bias -32%). For 75% of the scenarios the exposure estimates were, within the 90% uncertainty factor of 4.4, as reported for the original calibration study, which may indicate more uncertainty in the ART estimates in this industry. While the uncertainty was higher than expected this is likely due to the limited number of measurements per scenario, which were largely derived from single premises.     

Building a model of commitment to the natural environment to predict ecological behavior and willingness to sacrifice

We examined the connection between individuals’ relationships with the natural environment and their environmental behaviors with a focus on commitment to the environment, defined as psychological attachment and long-term orientation to the natural world. Commitment is theorized to emerge from structural interdependence with the environment and to lead to pro-environmental behaviors. Close relationships research has identified three key antecedents to commitment (satisfaction, alternatives, and investments). We developed environment-specific measures of these constructs, and factor analysis verified three distinct factors. A path analysis revealed that satisfaction with the environment and investments in the environment, but not alternatives to the environment, predicted commitment to the environment. Moreover, commitment mediated the effects of satisfaction and investments on general ecological behavior and willingness to sacrifice for the environment. In regression analyses, commitment predicted general ecological behavior and willingness to sacrifice for the environment, even when controlling for ecological worldview, inclusion of nature in the self, connectedness to nature, and environmental identity. Individuals who are satisfied with and invested in the natural world are likely to be committed to the environment and act with the well-being of the environment in mind.     

Characterization of isolated yeast growth response to methionine analogs

Methionine is one of the first limiting amino acids in poultry nutrition. The use of methionine-rich natural feed ingredients, such as soybean meal or rapeseed meal may lead to negative environmental consequences. Amino acid supplementation leads to reduced use of protein-rich ingredients. The objectives of this study were isolation of potentially high content methionine-containing yeasts, quantification of methionine content in yeasts and their respective growth response to methionine analogs. Minimal medium was used as the selection medium and the isolation medium of methionine-producing yeasts from yeast collection and environmental samples, respectively. Two yeasts previously collected along with six additional strains isolated from Caucasian kefir grains, air-trapped, cantaloupe, and three soil samples could grow on minimal medium. Only two of the newly isolated strains, K1 and C1, grew in minimal medium supplied with either methionine analogs ethionine or norleucine at 0.5% (w/v). Based on large subunit rRNA sequences, these isolated strains were identified as Pichia udriavzevii/Issatchenkia orientalis. P. kudriavzevii/I. orentalis is a generally recognized as a safe organism. In addition, methionine produced by K1 and C1 yeast hydrolysate yielded 1.3 ± 0.01 and 1.1 ± 0.01 mg g^?1 dry cell. Yeast strain K1 may be suitable as a potential source of methionine for dietary supplements in organic poultry feed but may require growth conditions to further increase their methionine content.     

AN EFFICIENT METHOD OF APPLYING ALUMINUM SALTS FOR SEDIMENT PHOSPHORUS INACTIVATION IN LAKES1

ABSTRACT: Alum and sodium aluminate were injected into the hypolimnion of eutrophic Kezar Lake, New Hampshire, with a specially designed applicator mechanism. This new method of applying aluminum salts to achieve phosphorus inactivation included two separate chemical distribution systems mounted on a hydraulic weed harvester. The design of the applicator system is described, and its cost-effectiveness is compared with other aluminum salt injections.     

What drives plan implementation? Plans,planning agencies and developers

This article investigates the determinants of plan implementation by applying a recently‐developed Plan Implementation Evaluation methodology. The lack of methodology to assess the implementation of plans has so far precluded any systematic analysis of the determinants of the implementation of local environmental plans. The article focuses on the implementation of plans in New Zealand. The key factors of implementation are: the quality of the plan; the capacity and commitment of land developers to implement plans; the capacity and commitment of the staff and leadership of planning agencies to implement plans; and the interactions between developers and the agency. The analysis is based on 353 permits implementing six local environmental plans in New Zealand, and on surveys of the developers who obtained the permits and of the planning agencies that granted the permits. The analysis finds that plan implementation is mainly driven by the resources of the planning agencies and by the quality of the plans, rather than by the characteristics of developers. Investments in plan writing and agency and staff capacity building thus improve the implementation of plans in the long‐run.     

Engineered containment systems: Identification of dominant ecological processes for long‐term performance assessment and monitoring

The infiltration of rainfall into contaminated soils and wastes provides the mechanism whereby hazardous chemical and radionuclide constituents of concern are leached and transported to underlying groundwater and potential human and ecological receptors. The application of engineered covers to reduce rainfall infiltration is an approach that is often selected for the remediation of contaminated sites. Evapotranspiration, or water‐balance, cover designs have been shown to be effective ways of preventing infiltration in arid and semiarid climates. This particular design relies on evaporation and vegetative transpiration to reduce potential infiltration to acceptable levels. In this article, we identify and examine the dominant ecological processes that affect the performance of evapotranspiration cover designs. © 2012 Wiley Periodicals, Inc.