Use of hydrophilic and hydrophobic microfiltration membranes to remove microorganisms and organic pollutants from primary effluents.

Primary-effluent wastewater from the Allegheny County Sanitary Authority (Pennsylvania) was used as a surrogate for combined-sewer-overflow waters contained in the sewershed. Pathogens contained in combined-primary-effluent wastewaters or combined-sewer overflows (CSOs) may pose a human-health threat to those coming in contact with such receiving waters. Polymeric ultra- and nano-membranes can be used to capture these microorganisms from CSOs. This research investigates the ability of polymeric hydrophobic and hydrophilic membranes, ranging in pore size from 0.2 to 0.8 microm, to remove pathogen-indicator organisms (Escherichia coli, enterococcus, and fecal coliforms). Membranes, with pore size 0.45 microm and smaller, were able to reduce the bacteria levels to nondetectable levels, with the sole exception of one membrane with pore size 0.3 microm.     

Generation pattern of sulfur containing gases from anaerobically digested sludge cakes.

Eleven dewatered sludge cakes collected from anaerobic digesters at different treatment plants were evaluated for the amount, type, and pattern of odorous gas production. All but one of the sludge cakes were from mesophilic anaerobic digesters. One was from a thermophilic digester. The pattern and quantities of sulfur gases were found to be unique for each of the samples with regard to the products produced, magnitude, and subsequent decline. The main odor-causing chemicals were volatile sulfur compounds, which included hydrogen sulfide, methanethiol, and dimethyl sulfide. Volatile sulfur compound production peaked in 3 to 8 days and then declined. The decline was a result of conversion of organic sulfur compounds to sulfide. In one side-by-side test, a high-solids centrifuge cake generated more odorous compounds than the low-solids centrifuge cake. The data show that anaerobic digestion does not eliminate the odor potential of anaerobically digested dewatered cakes.     

Widespread contamination by tris(4-chlorophenyl)methane and tris(4-chlorophenyl)methanol in cetaceans from the North Pacific and Asian coastal waters

For understanding global distribution, transport and behavior of tris(4-chlorophenyl)methane (TCPMe) and tris(4-chlorophenyl)methanol (TCPMOH), the two newly identified microcontaminants, the present study determined their concentrations and other persistent organochlorines (OCs) in the blubber of nine species of adult male cetaceans collected from various locations in the North Pacific Ocean and coastal waters of some Asian countries, during 1985-97. Concentrations of TCPMe and TCPMOH were found to be highest in northern right whale dolphins, which may be attributable to wide distribution of this species, including some heavily polluted areas such as coastal California. Elevated residue levels of TCPMe and TCPMOH were observed in both off-shore and coastal species, suggesting widespread contamination of these compounds in the marine environment. Higher contamination of TCPMe and TCPMOH was found in cetaceans from temperate and cold waters than those from tropical regions. The latitudinal distribution of TCPMe and TCPMOH in cetaceans from the North Pacific and Asian coastal waters was similar to that of DDTs, suggesting less transportable nature of TCPMe and TCPMOH in the marine environment. Data on the occurrence of TCPMe and TCPMOH further indicated high bioaccumulation potential of these compounds, which was comparable to DDTs. Relative concentrations of TCPMe/TCPMOH in cetaceans were apparently higher than those observed in seals, suggestive of lower metabolic capacity for these compounds in cetaceans than in pinnipeds, which is similar to classic contaminants like polychlorinated biphenyls and DDTs.     

Nonlinearities in source receptor relationships for sulfur and nitrogen compounds

The relationship between emissions and deposition of air pollutants, both spatially and in time forms an important focus for science and for policy makers. In practice, this relationship may become nonlinear if the underlying processes change with time, or in space. Nonlinearities may also appear due to errors in emission or deposition data, and careful scrutiny of both data sources and their relationship provides a means of picking up such deficiencies. Nonlinearities in source receptor relationships for sulfur and nitrogen compounds in Europe have been identified in measurement data for the UK. In the case of sulfur, the dry deposition process has been shown to be strongly influenced by ambient concentrations of NH3, leading to substantial increases in deposition rate as SO2 concentrations decline and the ratio SO2/NH3 decreases. The field evidence extends to measurements over three different surfaces in three countries across Europe. A mechanistic understanding of the cause of this nonlinearity has been provided. Apparent nonlinearities also exist in the sulfur deposition field through the influence of shipping emissions. The effect is clear at west coast locations, where during a period in which land-based sulfur emissions declined by 50%, no significant decline in concentrations of SO(2-) in precipitation were observed. The sites affected are primarily the coastal regions of southwestern UK, where shipping sources contribute a substantial fraction of the deposited sulfur, but the effect is not detectable elsewhere. Full quantification of the spatially disaggregated emission and their changes in time will eliminate this apparent nonlinearity in the source-receptor data. For oxidized nitrogen emission and deposition in the UK, there is strong evidence of nonlinearity in the source-receptor relationship. The concentrations and deposition of NO(3-) in precipitation have declined little following a reduction in emissions of 45% during the period 1987 to 2001. The data imply a significant decrease in the average transport distance for oxidized nitrogen and most probably an increase in the average oxidation rate. However, the net effect of changes in aerosol chemistry due to changes in sulfur emissions and less competition for the main oxidants as a consequence of reductions in sulfur emission have not been separated. A quantitative explanation of the cause of this nonlinearity is lacking and the effects are therefore identified as an important uncertainty for the development of further protocols to control acidification, eutrophication and photochemical oxidants in Europe.     

Experimental determination of sorption in fractured flow systems

Fracture "skins" are alteration zones on fracture surfaces created by a variety of biological, chemical, and physical processes. Skins increase surface area, where sorption occurs, compared to the unaltered rock matrix. This study examines the sorption of organic solutes on altered fracture surfaces in an experimental fracture-flow apparatus. Fracture skins containing abundant metal oxides, clays, and organic material from the Breathitt Formation (Kentucky, USA) were collected in a manner such that skin surface integrity was maintained. The samples were reassembled in the lab in a flow-through apparatus that simulated approximately 2.7 m of a linear fracture "conduit." A dual-tracer injection scheme was utilized with the sorbing or reactive tracer compared to a non-reactive tracer (chloride) injected simultaneously. Sorption was assessed from the ratio of the first temporal moments of the breakthrough curves and from the loss of reactive tracer mass and evaluated as a function of flow velocity and solute type. The breakthrough curves suggest dual-flow regimes in the fracture with both sorbing and non-sorbing flow fields. Significant sorption occurs for the reactive components, and sorption increased with decreasing flow rate and decreasing compound solubility. Based on moment analysis, however, there was little retardation of the center of solute mass. These data suggest that non-equilibrium sorption processes dominate and that slow desorption and boundary layer diffusion cause extensive tailing in the breakthrough curves.     

Radiocarbon content of synthetic and natural semi-volatile halogenated organic compounds

Some halogenated organic compounds, such as polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polybrominated diphenyl ethers (PBDEs), have been suggested to have natural sources but separating these compounds from their commercially synthesized counterparts is difficult. Molecular-level 14C analysis may be beneficial since most synthetic compounds are manufactured from petrochemicals (14C-free) and natural compounds should have "modern" or "contemporary" 14C levels. As a baseline study, we measured, for the first time, the 14C abundance in commercial PCB and PBDE mixtures, a number of organochlorine pesticides, as well as one natural product 2-(3',5'-dibromo-2'-methoxyphenoxy)-3,5-dibromoanisole. The latter compound was isolated from a marine sponge and is similar in structure to a PBDE. All of the synthetic compounds were 14C-free except for the pesticide toxaphene. which had a modern 14C abundance, as did the brominated natural compound. The result for toxaphene was not surprising since it was commercially synthesized by the chlorination of camphene derived from pine trees. These results suggest that measuring the 14C content of halogenated organic compounds may be quite useful in establishing whether organic compounds encountered in the environment have natural or synthetic origins (or both) provided that any synthetic counterparts derive from petrochemical feedstock.     

Chapter three: methodology of exposure modeling

In this chapter, the concept of exposure assessment and its evolution is introduced, and evaluated by critically appraising the pertinent literature as it applies to exposures to Particulate Matter (PM). Exposure measurement or estimation methodologies and models are reviewed. Three exposure/measurement methodologies are assessed. Estimation methods focus on source evaluation and attribution, sources include those outdoors and indoors as well as in occupational and in-transit environments. Fate and transport models and their inputs are addressed to estimate concentrations outdoors and indoors; source attribution techniques help focus on the contributing sources. Activity pattern techniques are also reviewed and their use in exposure models to estimate inhalation exposure to PM is presented. Deterministic, regression and other stochastic models of exposure to PM are reviewed and evaluated. Strengths, limitations, assumptions and affirmations of the use of exposure assessment as an integral component of risk assessment and risk management are discussed in the conclusions and discussions section of this work.     

Ozone predictions in Atlanta, Georgia: analysis of the 1999 ozone season

Ozone prediction has become an important activity in many U.S. ozone nonattainment areas. In this study, we describe the ozone prediction program in the Atlanta metropolitan area and analyze the performance of this program during the 1999 ozone-forecasting season. From May to September, a team of 10 air quality regulators, meteorologists, and atmospheric scientists made a daily prediction of the next-day maximum 8-hr average ozone concentration. The daily forecast was made aided by two linear regression models, a 3-dimensional air quality model, and the no-skill ozone persistence model. The team's performance is compared with the numerical models using several numerical indicators. Our analysis indicated that (1) the team correctly predicted next-day peak ozone concentrations 84% of the time, (2) the two linear regression models had a better performance than a 3-dimensional air quality model, (3) persistence was a strong predictor of ozone concentrations with a performance of 78%, and (4) about half of the team's wrong predictions could be prevented with improved meteorological predictions.     

Association of benzo(a)pyrene with dissolved organic matter: Prediction of Kdom from structural and chemical properties of the organic matter

The affinity of dissolved organic matter (DOM) for binding a polycyclic aromatic hydrocarbon, benzo(a)pyrene (BaP), was measured for 11 surface and ground waters and a commercial humic acid. The hydrophobic-acid (HbA) and hydrophobic-neutral (HbN) compositions of the DOM, solution absorptivity at 270nm (ABS₂₇₀), and DOM molar volumes were determined. Waters enriched in HbA material had a larger molar volume and higher aromatic content (as indicated by the ABS₂₇₀). There was a good correlation between the size and HbA content of the DOM from the different sources and the K_dom for binding BaP. An excellent predictive relationship (r² = 0.9) was demonstrated between the ABS₂₇₀ of a water and the K_dom for binding BaP. Based on these results, it is suggested that binding of BaP to DOM depends not only on the hydrophobicity of DOM, but also on the existence of an open structure within the DOM to provide access of the aqueous solute to hydrophobic domains within the DOM.