Computing sustainable manufacturing index with fuzzy analytic hierarchy process

The growing industrial interest in adopting sustainability programmes has ushered in studies regarding sustainability indicators which have continually flourished in current literature. However, limited attention is given to the development of priority ranking, which is an important input for any adopting firm. This paper presents a hybrid multi-criteria approach in determining priority areas in sustainable manufacturing (SM). Using fuzzy analytic hierarchy process to address uncertainty in hierarchical decision-making, this paper determines SM priority strategies and eventually identifies even lower level strategies. The computed sustainable manufacturing index is presented at both the organizational and operational levels for a real case study of an industrial plastic manufacturing firm. This work provides a detailed and transparent hierarchical decision-making approach based on SM framework, the use of which could be valuable to practicing managers across industries in their pursuit of greater sustainability.     

Case study of landfill leachate recirculation using small-diameter vertical wells

A case study of landfill liquids addition using small diameter (5 cm) vertical wells is reported. More than 25,000 m³ of leachate was added via 134 vertical wells installed 3 m, 12 m, and 18 m deep over five years in a landfill in Florida, US. Liquids addition performance (flow rate per unit screen length per unit liquid head) ranged from 5.6 × 10^?8 to 3.6 × 10^?6 m³ s^?1 per m screen length per m liquid head. The estimated radial hydraulic conductivity ranged from 3.5 × 10^?6 to 4.2 × 10^?4 m s^?1. The extent of lateral moisture movement ranged from 8 to 10 m based on the responses of moisture sensors installed around vertical well clusters, and surface seeps were found to limit the achievable liquids addition rates, despite the use of concrete collars under a pressurized liquids addition scenario. The average moisture content before (51 samples) and after (272 samples) the recirculation experiments were 23% (wet weight basis) and 45% (wet weight basis), respectively, and biochemical methane potential measurements of excavated waste indicated significant (p < 0.025) decomposition.     

Inflammation biomarkers associated with arsenic exposure by drinking water and respiratory outcomes in indigenous children from three Yaqui villages in southern Sonora,México

Environmental Science and Pollution Research - Environmental arsenic exposure in adults and children has been associated with a reduction in the expression of club cell secretory protein (CC16) and...     

The cost of mitigation strategies for agricultural adaptation to global change

Land recovery and the improvement of lands affected by desertification for agricultural use, is achieved when a sustained recovery of agricultural productivity over time is obtained. In the areas affected by desertification and drought, it is common that the ecosystems do not have enough funding for water management and irrigation. This situation leads to an inadequate assessment of the environmental goods and services in arid zones. As a result we have a misuse of these dry lands. Many countries are implementing policies and making investments and efforts to mitigate arid land degradation and desertification through the National Action Programs (NAP). However, for the long term planning of mitigation and adaptation strategies, it is necessary to know the cost of recovery and land improvement in certain areas in order to forecast the budgets. This is the main objective of this paper in order to combat desertification and drought in central northern Chile. We have calculated a recovery cost per hectare by region and for each of the agriculture, livestock and forestry (ALF) promotion agencies. The results indicate that the cost of land reclamation in the northern regions is much higher than in the southern regions of this studied area. The cost is especially high for Region II, where investment per hectare is almost to 3000 US$ per hectare. At the other extreme is the Region VII, in the south of the studied area where the investment required per hectare barely reaches 500 US$. The contribution of the promotion agencies to the total cost also varied among regions and agencies. We discuss the results within a context of recovery cost per hectare depending on the different environmental characteristics and agricultural development of each of the studied regions.     

Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy

Tool life has been a vital issue in machining titanium alloys. Recently, an atomization-based cutting fluid (ACF) application has been found to be an effective approach for cooling and lubrication in micromachining operations. In this study, an ACF spray system is developed for macro-scale turning of Ti–6Al–4V. The spray system is designed to minimize interaction between the fluid droplets, and the gas nozzle to control the divergence of the fluid droplets. Experiments are conducted to study the effect of five specific ACF spray parameters including fluid flow rate, spray distance, impingement angle, and type and pressure level of the droplet carrier gas on cutting forces, tool life, and chip characteristics. It has been observed that the combination of lower pressure (150 psi) air-mixed CO₂ with a higher flow rate (20 ml/min) and a larger spray distance (35 mm) produces a significantly longer tool life and broken chips. The results also reveal that the ACF spray system can extend tool life up to 40–50% over flood cooling.     

Evidence for a male-produced pheromone in <Emphasis Type="Italic">Tetropium fuscum</Emphasis> (F.) and <Emphasis Type="Italic">Tetropium cinnamopterum</Emphasis> (Kirby) (Coleoptera: Cerambycidae)

(E)-6,10-dimethyl-5,9-undecadien-2-ol (geranyl acetol), termed here fuscol, was identified as a male-produced pheromone emitted by Tetropium fuscum (F.) and Tetropium cinnamopterum Kirby. In field experiments, traps baited with synthetic fuscol alone were not significantly attractive, but the combination of fuscol plus host volatiles (a synthetic blend of monoterpenes plus ethanol) attracted significantly more male and female T. fuscum and female T. cinnamopterum than did host volatiles alone. This is the first homoterpenoid alcohol to be described in the Cerambycidae, and the first pheromone reported from the sub-family Spondylidinae.     

Characterization of extracellular polymeric substances in the biofilms of typical bacteria by the sulfur K-edge XANES spectroscopy

A combined approach of physicochemical extraction and sulfur K-edge X-ray absorption near-edge structure（XANES） spectroscopy was applied to characterize the extracellular polymeric substances（EPS） of typical bacterial biofilms in this study. Physicochemical analysis showed variation of the contents of DNA,polysaccharide and protein in different fractions of EPS in different mediums. The sulfur K-edge XANES analysis yielded a variety of spectra.Spectral fitting of the XANES spectra utilizing a large set of model compounds showed that there was more reduced sulfur in both LB-EPS（loosely bound EPS） and TB-EPS（tightly bound EPS） of all the biofilms in LB medium than in R2 A medium. More oxidized sulfur was identified in LB-EPS than that in TB-EPS,suggesting different niches and physiological heterogeneity in the biofilms. Our results suggested that the sulfur K-edge XANES can be a useful tool to analyze the sulfur speciation in EPS of biofilms.     

Effect of gaseous chlorine dioxide on indoor microbial contaminants

Traditional and modern techniques for bioaerosol enumeration were used to evaluate the relative efficiency of gaseous chlorine dioxide (ClO2) in reducing the indoor microbial contamination under field and laboratory conditions. The field study was performed in a highly microbially contaminated house, which had had an undetected roof leak for an extended period of time and exhibited large areas of visible microbial growth. Air concentrations of culturable fungi and bacteria, total fungi determined by microscopic count and polymerase chain reaction (PCR) assays, endotoxin, and (1 --> 3)-beta-D-glucan were determined before and after the house was tented and treated with ClO2. The laboratory study was designed to evaluate the efficiency of ClO2 treatment against known concentrations of spores of Aspergillus versicolor and Stachybotrys chartarum on filter paper (surrogate for surface treatment). These species are commonly found in damp indoor environments and were detected in the field study. Upon analysis of the environmental data from the treated house, it was found that the culturable bacteria and fungi as well as total count of fungi (as determined by microscopic count and PCR) were decreased at least 85% after the ClO2 application. However, microscopic analyses of tape samples collected from surfaces after treatment showed that the fungal structures were still present on surfaces. There was no statistically significant change in airborne endotoxin and (1 --> 3)-beta-D-glucan concentration in the field study. The laboratory study supported these results and showed a nonsignificant increase in the concentration of (1 --> 3)-beta-D-glucan after ClO2 treatment.     

Development and application of long-term sublethal whole sediment tests with Arenicola marina and Corophium volutator using Ivermectin as the test compound

Short-term whole sediment tests using the amphipod Corophium volutator and the polychaete Arenicola marina are now routinely used in Europe to assess the acute toxicity of marine sediments. However, there is still a need to develop longer-term assays which measure effects on sublethal endpoints that are more relevant to predicting impacts at the population level. The effect of increasing exposure times and measuring additional endpoints such as growth, on the sensitivity of these assays was investigated. The test compound used was the chemotherapeutant Ivermectin (IVM), used in aquaculture to treat sea lice infestations. IVM was found to be acutely toxic to both test organisms. Extending the lugworm test to 100 days increased sensitivity of survival by a factor of three; a significant reduction in casting rate was observed at concentrations an order of magnitude lower. This assay shows potential for detecting the sublethal effects of low concentrations of sediment contaminants. Increasing the exposure time did not seem to affect the sensitivity of the amphipod, but further method development is required.     

Multi-component assessment of worker exposures in a copper refinery. Part 2. Biological exposure indices for copper, nickel and cobalt

Urinary copper (Cu), nickel (Ni) and cobalt (Co) concentrations were determined for 127 Cu refinery workers (40 females, 87 males), with values of the 95% upper confidence interval of the geometric mean in nmol per mmol creatinine of 89 (Ni), 42 (Cu) and 3.4 (Co) for electrorefinery workers. In the pyrometallurgical departments, the corresponding concentrations were 37 (Ni), 99 (Cu) and 11 (Co). Female workers had higher Co urinary concentrations than males (p< or = 0.05) while no gender difference was observed for Cu and Ni. Inter-elemental correlations were moderate to weak. Based on the inhalable aerosol levels reported previously for the same workers, the observed urinary Cu concentrations were considerably lower than expected, relative to Co and Ni. This is interpreted in terms of the current understanding of Cu homeostasis.