Validation of a new method for measuring and continuously monitoring the efficiency of industrial flares

A new method has been developed for a direct and remote measurement of industrial flare combustion efficiency (CE). The method is based on a unique hyper-spectral or multi-spectral Infrared (IR) imager which provides a high frame rate, high spectral selectivity and high spatial resolution. The method can be deployed for short-term flare studies or for permanent installation providing real-time continuous flare CE monitoring.

In addition to the measurement of CE, the method also provides a measurement for level of smoke in the flare flame regardless of day or night. The measurements of both CE and smoke level provide the flare operator with a real-time tool to achieve “incipient smoke point” and optimize flare performance.

The feasibility of this method was first demonstrated in a bench scale test. The method was recently tested on full scale flares along with extractive sampling methods to validate the method. The full scale test included three types of flares – steam assisted, air assisted, and pressure assisted. Thirty-nine test runs were performed covering a CE range of approximately 60-100%. The results from the new method showed a strong agreement with the extractive methods (r²=0.9856 and average difference in CE measurement=0.5%).

Implications: Because industrial flares are operated in the open atmosphere, direct measurement of flare combustion efficiency (CE) has been a long-standing technological challenge. Currently flare operators do not have feedback in terms of flare CE and smoke level, and it is extremely difficult for them to optimize flare performance and reduce emissions. The new method reported in this paper could provide flare operators with real-time data for CE and smoke level so that flare operations can be optimized. In light of EPA’s focus on flare emissions and its new rules to reduce emissions from flares, this policy-relevant development in flare CE monitoring is brought to the attention of both the regulating and regulated communities.     

Resistance to teratogenesis by F1 and F2 embryos of PAH-adapted Fundulus heteroclitus is strongly inherited despite reduced recalcitrance of the AHR pathway

Atlantic killifish (Fundulus heteroclitus) inhabiting the Atlantic Wood Superfund site on the Elizabeth River (Portsmouth, VA, USA) are exposed to a complex mixture of polycyclic aromatic hydrocarbons (PAHs) from former creosote operations, but are resistant to the acute toxicity and cardiac teratogenesis caused by PAHs. The resistance is associated with a dramatic recalcitrance to induction of cytochrome P450 (CYP1) metabolism enzymes following exposure to aryl hydrocarbon receptor (AHR) agonists, along with an elevated antioxidant response and increased expression of several other xenobiotic metabolism and excretion enzymes. However, the heritability of the resistance in the absence of chemical stressors has been inconsistently demonstrated. Understanding the heritability of this resistance will help clarify the nature of population-level responses to chronic exposure to PAH mixtures and aid in identifying the important mechanistic components of resistance to aryl hydrocarbons. We compared the response of Atlantic Wood F1 and F2 embryos to benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), 3,3′,4,4′,5-pentachlorobiphenyl (PCB-126), and a mixture of BkF and fluoranthene (Fl) to that of F1 embryos of reference site killifish. Resistance to cardiac teratogenesis and induction of CYP mRNA expression and CYP activity was determined. We found that both Atlantic Wood F1 and F2 embryos were highly resistance to cardiac teratogenesis. However, the resistance by Atlantic Wood F2 embryos to induction of CYP mRNA expression and enzyme activity was intermediate between that of Atlantic Wood F1 embryos and reference embryos. These results suggest that resistance to cardiac teratogenesis in Atlantic Wood fish is conferred by multiple factors, not all of which appear to be fully genetically heritable.     

Occurrence and levels of organochlorine compounds in human breast milk in Bangladesh

In low-income countries, the use of some organochlorine pesticides is still common in order to increase food production. Monitoring the chemical exposure is an important step in risk-reducing strategies. This is the first study to report concentrations of organochlorines in breast milk of women from Bangladesh where farming is the main income source.Organochlorines such as p,p′-DDT, o,p′-DDT, p,p′-DDE, p,p′-DDD (i.e., ∑DDT), HCB, α-, β- and γ-HCH, trans-chlordane, cis-chlordane, oxy-chlordane, trans-nonachlor, cis-nonachlor, mirex and polychlorinated biphenyls (CB 28, 52, 99, 101, 105, 114, 118, 123, 128, 138, 141, 149, 153, 156, 157, 163, 167, 170, 180, 183, 187, 189, 194) were analyzed in breast milk collected in 2002 from 72 first-time mothers (median age 20 years) living in the rural area Matlab, Bangladesh.While the concentrations of PCBs and many of the pesticides were low, the concentrations of p,p′-DDT and its metabolite p,p′-DDE were high (median 349 and 1645 ng g⁻¹ lipid, respectively) in comparison to other countries. The median value of ∑DDT was 2123 ng g⁻¹ lipid. The estimated daily exposure to p,p′-DDT, p,p′-DDE and ∑DDTs was 10, 30 and 42 μg kg⁻¹ body weight, respectively, in 3 months old infants. The p,p′-DDE/p,p′-DDT ratio ranged from 1 to 23, where 58% of the mothers had a ratio below 5 indicating recent or ongoing DDT exposure.This study reports infant exposure and maternal body burden of organochlorines through breast milk. Although the findings give no reason to limit breast-feeding, it is essential to identify the main exposure sources and find means to decrease the exposure.     

Conceptual frameworks and key questions for assessing the contribution of marine protected areas to shark and ray conservation

Marine protected areas (MPAs) are key tools in addressing the global decline of sharks and rays, and marine parks and shark sanctuaries of various configurations have been established to conserve shark populations. However, assessments of their efficacy are compromised by inconsistent terminology, lack of standardized approaches to assess how MPAs contribute to shark and ray conservation, and ambiguity about how to integrate movement data in assessment processes. We devised a conceptual framework to standardize key terms (e.g., protection, contribution, potential impact, risk, threat) and used the concept of portfolio risk to identify key attributes of sharks and rays (assets), the threats they face (portfolio risk), and the specific role of MPAs in risk mitigation (insurance). Movement data can be integrated into the process by informing risk exposure and mitigation through MPAs. The framework is operationalized by posing 8 key questions that prompt practitioners to consider the assessment scope, MPA type and purpose, range of existing and potential threats, species biology and ecology, and management and operational contexts. Ultimately, MPA contributions to shark and ray conservation differ according to a complex set of human and natural factors and interactions that should be carefully considered in MPA design, implementation, and evaluation.     

Signal-transfer modeling for regional assessment of forest responses to environmental changes in the southeastern United States

Stochastic transfer of information in a hierarchy of simulators is offered as a conceptual approach for assessing forest responses to changing climate and air quality across 13 southeastern states of the USA. This assessment approach combines geographic information system and Monte Carlo capabilities with several scales of computer modeling for southern pine species and eastern deciduous forests. Outputs, such as forest production, evapotranspiration and carbon pools, may be compared statistically for alternative equilibrium or transient scenarios providing a statistical basis for decision making in regional assessments. This revised version was published online in July 2006 with corrections to the Cover Date.     

Using photographic image analysis to assess ground cover: a case study of forest road cutbanks

Road prisms, including cutbanks, road surfaces, and fillslopes, can be important contributors of sediment to streams in forested watersheds. Following road construction, cutbanks and fillslopes are often seeded, mulched, and sometimes fertilized to limit erosion and sedimentation. Assessing the success of vegetation establishment on cutbanks and fillslopes is a common task of forested land managers. This study developed and applied a photographic image analysis method to assess percent ground cover along an entire cutbank of a cut-and-fill haul road in the Monongahela National Forest in Tucker County, West Virginia. Variable-sized sections were employed to quantify the vegetative cover. Measurements obtained by this technique were similar to more commonly applied fixed-area plots, and it proved to be a useful tool for land managers who require a more repeatable quantification of ground cover than is possible through visual assessments. Cutbank slope and aspect also were analyzed to determine their potential impact on cutbank vegetation establishment. Slope was not a significant variable in explaining differences in vegetation cover; however, aspect did affect vegetation establishment. South-facing aspects had significantly lower percent vegetation cover than northeast, east, northwest, and north northwest aspects after the first year following seeding and throughout the entire study. Mean percent cover on the south-facing cutbanks was 32% over all time periods, compared to 60% to 73% for the other represented aspects. This result was expected since south-facing slopes generally are drier in the growing season and are subject to more freeze–thaw cycles in the winter. Timber felled onto the cutbank also decreased vegetative cover in the short term on north and north northwest aspects, but vegetation quickly became reestablished on these aspects with their favorable growing conditions.     

Water quality trends and changing agricultural practices in a midwest U.S. watershed, 1994-2006

Sediment and nutrient concentrations in surface water in agricultural regions are strongly influenced by agricultural activities. In the Corn Belt, recent changes in farm management practices are likely to affect water quality, yet there are few data on these linkages at the landscape scale. We report on trends in concentrations of N as ammonium (NH(4)) and nitrate (NO(3)), soluble reactive phosphorus (SRP), and suspended sediment (SS) in three Corn Belt streams with drainage areas of 12 to 129 km(2) for 1994 through 2006. During this period, there has been an increase in conservation tillage, a decline in fertilizer use, and consolidation of animal feeding operations in our study watersheds and throughout the Corn Belt. We use an autoregressive moving average model to include the effects of discharge and season on concentrations, LOWESS plots, and analyses of changes in the relation between discharge and concentration. We found significant declines in mean monthly concentrations of NH(4) at all three streams over the 13-yr period, declines in SRP and SS in two of the three streams, and a decline in NO(3) in one stream. When trend coefficients are converted to percent per year and weighted by drainage, area changes in concentration are -8.5% for NH(4), -5.9% for SRP, -6.8% for SS, and -0.8% for NO(3). Trends in total N and P are strongly tied to trends in NO(3), SRP, and SS and indicate that total P is declining, whereas total N is not.     

Chemical and toxicologic assessment of organic contaminants in surface water using passive samplers

Passive sampling methodologies were used to conduct a chemical and toxicologic assessment of organic contaminants in the surface waters of three geographically distinct agricultural watersheds. A selection of current-use agrochemicals and persistent organic pollutants, including polycyclic aromatic hydrocarbons, polychlorinated biphenyls, and organochlorine pesticides, were targeted using the polar organic chemical integrative sampler (POCIS) and the semipermeable membrane device passive samplers. In addition to the chemical analysis, the Microtox assay for acute toxicity and the yeast estrogen screen (YES) were conducted as potential assessment tools in combination with the passive samplers. During the spring of 2004, the passive samplers were deployed for 29 to 65 d at Leary Weber Ditch, IN; Morgan Creek, MD; and DR2 Drain, WA. Chemical analysis of the sampler extracts identified the agrochemicals predominantly used in those areas, including atrazine, simazine, acetochlor, and metolachlor. Other chemicals identified included deethylatrazine and deisopropylatrazine, trifluralin, fluoranthene, pyrene, cis- and trans-nonachlor, and pentachloroanisole. Screening using Microtox resulted in no acutely toxic samples. POCIS samples screened by the YES assay failed to elicit a positive estrogenic response.     

Assessing multiple novel tracers to improve the understanding of the contribution of agricultural farm waste to diffuse water pollution

A study was undertaken on drained and undrained 1 ha grassland lysimeters to assess the effectiveness of multiple novel tracing techniques in understanding how agricultural slurry waste moves from land to water. Artificial fluorescent particles designed to mimic the size and density of organic slurry particles were found to move off the grassland via inter-flow (surface + lateral through-flow) and drain-flow. Where both pathways were present the drains carried the greater number of particles. The results of the natural fluorescence and δ13C of water samples were inconclusive. Natural fluorescence was higher from slurry-amended lysimeters than from zero-slurry lysimeters, however, a fluorescence decay experiment suggested that no slurry signal should be present given the time between slurry application and the onset of drainage. The δ13C values of >0.7 microm and <0.7 microm material in drainage were varied and unrelated to discharge. The mean value of >0.7 microm δ13C in water from the drain-flow pathways was higher from the lysimeter which had received naturally enriched maize slurry compared to the lysimeter which received grass slurry indicating a contribution of slurry-derived material. Values of <0.7 microm δ13C from the same pathway, however, produced counter intuitive trends and may indicate that different fractions of the slurry have different δ13C values.